MONSTER Airmars XKT27 True Wireless Bluetooth Headphone Instruction Manual

MONSTER Airmars XKT27 True Wireless Bluetooth Headphone

Product parameters

• Bluetooth version V5.4
• Transmission distance    10m
• Driver diameter   10 mm
• Driver impedance  320÷15%
• Sensitivity  96÷3.0dB
• Frequency response range    20Hz-20kHz
• Battery capacity (charging case)  300mAh 3.7V
• Battery capacity (Headphone)  40mAh 3.7V
• Charging time (charging case)  1.5 hours
• Music playtime (headphone)  6 hours
• Music playtime with charging case  20 hours

Packing list

Product Schematic Description

Charge the charging case
Connect the charging case to the 5V power adapter with a Type-C charging cable .

• Rated input: 5V == 40mA(Headphone)
• Rated input: 5V- 200mA (charging case)

Indicator guide

Product operating instructions

Power on

• Method 1: Open the charging case cover and remove the headphones. The headphones will automatically turn on.
• Method 2: Press and hold the function touch button for 2 Seconds to turn on the headset.

Power off

• Method 1: Put the earphones back in the charging case close the charging case cover and turn off the earphones.
• Method 2 : If the connection is not successful after more than 3 minutes, the headphones will automatically shut down.

Pairing

• Step 1: Open the charging case cover and remove the headphones. The headphones will automatically turn on and pair;
• Step 2: Search and click for “Monster Airmars XKT27” on the bluetooth list of the smart device,and when connection is successful, “connected” will be heard

Headphones will try reconnecting to the device within 3 minutes when the connection is lost.

Note:

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.

Operation

Normal

Music playback

Phone

Music/Game/Transparency /ANC switching: Device connected

Restore Factory settings

• Model 1: If any earbud disconnects with the Bluetooth Device when turn on, click the MPB 5 times to clear the previous Pairing information and turn off.
• Mode 2 : Power-on Connection Status: Tap the left and right headset five times,and hold down 10S within 3S to clear the pairing between the headset and Bluetooth device power off after massage

Precautions

1. After the charging box is opened, the headphones automatically turn on, pair, and connect; Put the headphones into the charging box, close the cover, charge the headphones, and turn them off.
2. Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain good Contact for charging.
3. Keep the battery (battery pack) away from inflammable or excessive heat such as direct sunlight. Do not disassemble, impact extrusion or put into the fire.lf severe Swelling occurs, do not continue to use. Do not be exposed to high temperatures. Do not use after soaking water
4. Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behaviour, etc.

Warnings

1. Do not use headphones at high volume for an extended period.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agents on the headphones.

This table is compiled according to SJ/T 11364.

• O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
• X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This Equipment has been tested and found to comply with the limits for a Class B Digital Device, under Part 15 of the FCC Rules. These limits are designed to provide Reasonable Protection against Harmful Interference in a residential Installation. This Equipment generates uses and can radiate radio Frequency Energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  FCC ID: 2A8PV-QSMXKT27

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Environment-Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

M MONSTER™

• Certificate of Approval
• Product No:
• Production Time:
• PASS
• QC:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>