SHOW CSB-40T Indoors Outdoors Speaker User Manual

SHOW CSB-40T Indoors Outdoors Speaker

Product Information

Specifications

• Model : CSB-40A, CSB-30A, CSB-40T, CSB-30T
• Indoor/Outdoor Speaker

Introduction
The Indoors/Outdoors Speaker is a high-quality audio device designed for both indoor and outdoor use. It provides powerful and clear sound for various applications.

Control Elements
The control elements on the speaker include

• Power button : Turns the speaker on and off.
• Volume control : Adjusts the volume level.
• Tone control : Adjusts the bass and treble levels.
• Input selection: Selects the audio source (e.g., Bluetooth, auxiliary input).

Connection Description
The speaker can be connected to various audio sources. The available connection options include

• Bluetooth: Pair the speaker with a Bluetooth-enabled device to wirelessly stream audio.
• Auxiliary input : Connect an audio device using a standard 3.5mm audio cable.
• USB input : Connect a USB flash drive or other USB storage devices to play audio files.

Installation Description
The speaker can be installed in both indoor and outdoor settings. Follow these guidelines for proper installation:

• Indoor Installation : Place the speaker on a stable surface or mount it on a wall using the provided mounting brackets.
• Outdoor Installation : Ensure the speaker is protected from direct exposure to rain or extreme weather conditions. Mount it securely on a wall or use a weatherproof enclosure.

Block Diagram
The block diagram illustrates the internal components and their connections within the speaker.

Technical Specifications
Below are the technical specifications of the Indoors/Outdoors Speaker

• Frequency Response : 20Hz – 20kHz
• Power Output : 40W (CSB-40A, CSB-40T), 30W (CSB-30A, CSB-30T)
• Impedance : 8 Ohms
• Dimensions : [Insert dimensions]
• Weight : [Insert weight]

Frequently Asked Questions (FAQ)

• Q: Can I use the speaker outdoors?
  A: Yes, the Indoors/Outdoors Speaker is designed for both indoor and outdoor use. However, ensure that it is protected from direct exposure to rain or extreme weather conditions.

• Q: How do I connect my audio device to the speaker?
  A: You can connect your audio device to the speaker using Bluetooth, an auxiliary input, or a USB input. Refer to the Connection Description section in the user manual for detailed instructions.

• Q: What is the power output of the speaker?
  A: The CSB-40A and CSB-40T models have a power output of 40W, while the CSB-30A and CSB-30T models have a power output of 30W.

SAFETY RELATED SYMBOLS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

• The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions.
• The symbol is used in the service documentation to indicate that specific component shall be only replaced by the component specified in that
• Documentation for safety reasons.
• Protective grounding terminal.
• Alternating current /voltage.
• Hazardous live terminal .
  • ON : Denotes the apparatus turns on.
  • OFF : Denotes the apparatus turns off, because of using the single pole switch, be sure to unplug the AC power to prevent any electric shock before you proceed your service.

WARNING : Describes precautions that should be observed to prevent the danger of injury or death to the user.

Disposing of this product should not be placed in municipal waste and should be separate collection.

CAUTION: Describes precautions that should be observed to prevent danger of the apparatus.

Power Supply
Ensure the source voltage matches the voltage of the power supply before turning ON the apparatus.

INDOORS/OUTDOORS SPEAKER

Unplug this apparatus during lightning storms or when unused for long periods of time.

• External Connection
  The external wiring connected to the output hazardous live terminals requires installation by an instructed person, or the use of ready-made leads or cords.

• Do not Remove any Cover
  There are maybe some areas with high voltages inside, to reduce the risk of electric shock, do not remove any cover if the power supply is connected.
  The cover should be removed by the qualified personnel only.
  No user serviceable parts inside.

• Fuse
  To prevent a fire, make sure to use fuses with specified standard (current, voltage, type). Do not use a different fuse or short circuit the fuse holder.
  Before replacing the fuse, turn OFF the apparatus and disconnected the power source.

• Protective Grounding
  Make sure to connect the p rotective grounding to prevent any electric shock before turning ON the apparatus.
  Never cut off the internal or external pro-tective grounding wire or disconnect the wiring of protective grounding terminal.

• Operating Conditions
  This apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on this apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  Do not use this apparatus near water. Install in accordance with the manufacture-r’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including am-plifiers) that produce heat. Do not block any ventilation openings.
  No naked flame sources, such as lighted candles, should be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Follow all instructions.
• Keep these instructions.
• Heed all warnings.
• Only use attachments/accessories spec-ified by the manufacturer.

Power Cord and Plug

• Do not defeat the safety purpose of the polarized or grounding type plug.
• A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
• prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace-ment of the obsolete outlet.
• Protect the power cord from being walk-ed on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Cleaning

• When the apparatus needs a cleaning, you can blow off dust from the apparatus with a blower or clean with rag etc.
• Don’t use solvents such as benzol, alcohol, or other fluids with very strong volatility and flammability for cleaning the apparatus body. Clean only with dry cloth.

Servicing

• Refer all servicing to qualified personnel. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so .
• Servicing is required when the apparatus has been damaged in any way ,such as power supply cord or plug is damaged , liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

INTRODUCTION

• CSB series is designed for indoor and outdoor installation and most public address system. It provides quality performance and alternative three models, including passive speaker cabinet, speaker cabinet with transformer and active speaker cabinet. Furthermore, we offer optional metal rotatable mounting bracket, thus you can install CSB speaker on wall easily. This new compact speaker series meet every demands for restaurants, supermarket, shopping mall, pubs, and so on.
• Both passive speaker cabinets and speaker cabinets with transformer are equipped with IP 44, they can be used in various outdoor applications and situations.
• Enjoy your CSB series speaker cabinet and make sure that read this manual carefully before operation.

CONTROL ELEMENTS

REAR PANEL

1. Input Connection

   • Use push-button for fixed installation.
   • The Positive connection is usually marked with(+),or Red push-button. Use it to connect the amplifier output (+ ).
   • The Negative connection is usually marked with(-),or Black push-button. Use it to connect the amplifier output

2. Power Selections

   • With this rotary switch, it is possible to select the power level of the CSB-30T / 40T from 5W minimum to 40W maximum, for two different Constant
   • Voltages 70V or 100V. In Off position the speaker system is disconnected from the Line. In 6 position, the bypass is activated.

3. Balanced Input Use this socket to input signal with a

4. ON / OFF switch
   Use this switch to switch on / off power supply.

5. Stereo Input
   It is used to input stereo signal.

6. LINK
   It is used for outer signal output and be connected with other active speaker cabinets.

7. Volume Control
   It is used to adjust the main volume.

CONNECTION DESCRIPTION

CONNECT ONE CSB PASSIVE MODEL TO ONE AMPLIFIER (FIGURE 1):
When the nominal impedance of the speaker you need to set up is 8 , then you should select and connect it to the amplifier terminal with 8 norminal impedance. Please notice that the speaker nominal impedance is no less than 3 / 4 nominal impedance of amplifier output. Connect “8 /+” of amplifier output to the red push button (+) of speaker and “com/-” of the amplifier to the black one (-) of the speaker.

CONNECT TWO OR MORE CSB PASSIVE MODELS TO ONE AMPLIFIER (FIGURE 2):
When two speakers with 8 nominal impedance are parallel, and the total impedance is 4 , then you should select and connect one of them to the amplifier terminal with 4 nominal impedance. Please notice that the total impedance of the parallelled speakers is no less than 3 / 4 nominal impedance of amplifier output. Connect “4 /+”of amplifier output to the red push button (+) of speaker and “com/-” of the amplifier to the black one (-) of the speaker.

LEVEL DISTRIBUTION SYSTEM (CSB “T” MODEL) CONNECTION DESCRIPTION:
Level distribution system only controls “T” model. CSB-30T and CSB-40T have built-in transformer of 70/100V , can connect many speakers to one channel , and only need one amplifier. The amplifier output terminal “com/-” stands for negative polar, terminal “70V /100V/+ ” stands for positive .The red speaker terminal stands for positive, black stands for negative. Please connect amplifier to speaker right, incorrect connection may cause damage to amplifier and speaker. Finally set your desired output power ,see picture 3A to adjust the band switch to meet your need, in this case, the total power of all the speakers can’t exceed the nominal power of amplifier. One 320W amplifier channel can drive 8 speakers of 40W, i.e. 40 8=320 320W). For safety, the total power of all the speakers should be less than 3/4 nominal power of amplifier (One 320W amplifier channel can drive 6 speakers of 40W, i.e. 40 6=240W 320W).

INSTALLATION DESCRIPTION

Note: Commercial audio installation system must conform to local building laws. When install speaker on wall or ceiling, please consult a building constructer with a license or a professional engineer. The corporation won’t be responsible for the improper installation or damage because of not conforming to installation description.
Installation procedure of CS-3 bracket is very simple and convenient, the appearance is pleasing to the eye.

1. Step 1 : Fasten the CS-3 bracket(1) on the wall with screws. The wall material must support the weight of the cabinet.
2. Step 2 : Place the body of cabinet in CS – 3 bracket and lock the screws tightly.
3. Step 3 : Use screw CS-3 bracket and CS-3 bracket and use steel rope to connect two brackets.
   

INDOOR INSTALLATION DESCRIPTION

CSB series speakers are designed specially for fixing and using in different circumstances. The property of speakers may be different due to different circumstances. There is an acoustic surface (wall, floor and ceiling) in a closed room, so the acoustic indoor will turn complex. When acoustic wave hits the surface, a part of acoustic energy is reflected, and others are absorbed. Reflection and absorption are depending on the frequencies of acoustic wave and angle of hitting surface. When operate the cabinet, both man and furniture can absorb the acoustic energy. Please note the position of man and furniture when installing. Reverberation is the results of the reflected acoustic wave continue bouncing between the surfaces. Every reflection will loss the energy. When the acoustic hit the reflection surface, the room will be filled with random reflected acoustic wave. The music and address will be complex. It is recommended that install more speakers and make the volume of speakers lower to reduce the reverberation in high reverberating room. (Please see figure 5B)

Speaker coverage range Direct the center axile of the speaker to the flat surface of receiving area. The speakers of 90 90 series can spread the speaker tone to all the directions at the axile of 45 . If you use the speakers in large room, you can divide the room to some zones. Then decide the installing location of the speakers . (Please see figure 6) BLOCK DIAGRAM

TECHNICAL SPECIFICATIONS

FREQUENCY RESPONSE DIAGRAMS

IMPORTANT!
Please read this manual carefully before operating this unit for the first time.

All rights reserved to SEIKAKU. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this catalogue without written permission is forbidden. Copyright © 2009 SEIKAKU GROUP

SEIKAKU TECHNICAL GROUP LIMITED

• NO.I LANE 17, SEC.2, HAN SHI WEST ROAD, TAICHUNG 40151, TAIWAN
• tel : 886-4-22313737
• fax : 886-4-22346757
• www.show-pa.com
• sekaku@sekaku.com
• NF03457-1.3
• www.show-pa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>