iNNOTECK DS-5369 2 Slice Toaster Instructions

: June 15, 2024
: INNOTECK

Table of Contents

iNNOTECK DS-5369 2 Slice Toaster
Product Information
Product Usage Instructions
IMPORTANT SAFEGUARDS
Product Overview
PRODUCT SPECIFICATIONS
BEFORE THE FIRST USE
USING YOUR TOASTER
CARE AND CLEANING
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iNNOTECK DS-5369 2 Slice Toaster

Product Information

Specifications

Model: DS-5369/DS-5370/DS-5371/DS-5372 Toaster
Power voltage / Frequency / Wattage: 220-240V / 50-60Hz / 800W

Product Overview

Bread Carriage Lever
DEFROST button with Neon light
REHEAT button with Neon light
CANCEL button with Neon light
Knob with 7 browning controls
Crumb tray (at rear)

Important Safeguards

Do not touch the top of the appliance or other hot parts during or after use, use handles or knobs.
Do not insert oversize foods, metal, foil packages, or utensils into the toaster.
Do not attempt to dislodge food when the appliance is plugged in and never insert cooking utensils into the slots.
Never operate the appliance when it is empty (when there is no bread in the slot).
Do not insert other foods that may drip during the cooking process. This may make the cleaning procedure more difficult and possibly cause a fire.
Clean the crumb tray regularly at the bottom of the toaster as the crumbs can smoke or burn.
Do not insert food by force that is too thick for the slots.
Do not insert forks or other utensils into the toaster to remove bread. It can damage the toaster and has a high risk of electric shock.
Should any bread pieces remain in the toaster, remove the plug from the mains, wait for the toaster to cool down until it is safe to touch, then turn the toaster over and shake it gently.

Before the First Use

Before using your toaster for the first time, operate the toaster without bread once.
As with all new electric heating elements, your toaster will emit a ‘new’ smell when it is first switched on. This is quite normal and not a cause for concern.

Product Usage Instructions

A) Making toast

Plug in the main socket.
Place the sliced bread into the slots.
Adjust the Browning control by your desired setting (1=light, up to 7=dark).
Depress the Bread Carriage Lever. The toaster will be centered in the slot and begin toasting the bread.
Upon completion, it will automatically rise and lift the toast from the toaster.
Remarks: It is possible to re-adjust the toast lighter or darker by rotating the knob during the toasting program.

B) Additional Features

Defrost Button

To toast frozen bread, place them into the bread slots and select the desired browning setting. Depress the bread carriage lever and then press the DEFROST button. The DEFROST and CANCEL neon lights both illuminate. The toaster will operate for a longer period for defrosting and toasting the bread.

Cancel Button

Press this Cancel button if you wish to interrupt the toasting process, for example, if the toast is too much browning or a fault occurred.

Reheat Button

To reheat the bread that has already toasted but gone cold, place the toasted bread into bread slots and then press the REHEAT button. The button will illuminate and the toaster will run for a short period to reheat the bread.

FAQ

Q: Can I insert metal or foil packages into the toaster?

No, you should not insert metal or foil packages into the toaster. It can cause damage to the toaster and is unsafe.

Q: How should I clean the toaster?

You should regularly clean the crumb tray at the bottom of the toaster to prevent the smoking or burning of crumbs.
Additionally, you can wipe the exterior of the toaster with a damp cloth, making sure to unplug it from the mains before cleaning.

IMPORTANT SAFEGUARDS

Please read these instructions carefully before using the product.

This toaster conforms to accepted technical standards and relevant safety requirements for electrical devices. Repairs to this appliance including the change of power cord should only be carried out by a qualiﬁed technician to avoid a hazard. The manufacturer shall not be liable for damage caused by improper usage or failure to follow the instructions.
This toaster can be used by children aged 8 years and above if they have
been given supervision or instruction concerning the use of the appliance in a safe way and understanding the hazards involved.
Children shall not play with the appliance.
This toaster is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall not make cleaning and user maintenance unless they are older than 8 years and supervised.
Keep the appliance and its cord out of reach of children less than 8 years old.
WARNING: Misuse of the appliance could cause personal injury.
The bread may burn, hence do not use the appliance near or below combustible material such as curtains.
This appliance is not intended to be operated through an external timer or a separate remote control system.
Place the appliance on ﬂat surface. The temperature of accessible surfaces may be high when it is operating.

The following safety devices are given additionally:

Main Cables: Do not let the cable run across a cooker or hot area which might damage the cable.
Do watch your appliance during use. Don’t leave it unattended.
WARNING: Do not touch the top of the appliance or other hot parts during or after use, use handles or knobs.
WARNING: Do not insert oversized foods, metal, foil packages, or utensils into the toaster.
WARNING: Do not attempt to dislodge food when the appliance is plugged in and never insert cooking utensils into the slots.
Never operate the appliance when it is empty (when there is no bread in the slot)
Do not insert other foods that may drip during the cooking process. This may make the cleaning procedure more diﬃcult and possibly cause ﬁre.
Clean the crumb tray regularly at the bottom of the toaster as the crumb can smoke or burn.
Do not insert food by force that is too thick for the slots.
Do not insert forks or other utensils into the toaster to remove bread. It can damage the toaster and has a high risk of electric shock.
Should any bread pieces remain in the toaster, remove the plug from the mains, wait for the toaster to cool down until it is safe to touch, then turn the toaster over and shake it gently.

CAUTION! HOT SURFACE
PLEASE BE AWARE OF HOT SURFACES
HANDLE WITH CARE
HOUSEHOLD USE ONLY

Product Overview

Bread Carriage Lever
DEFROST button with Neon light
REHEAT button with Neon light
CANCEL button with Neon light
Knob with 7 browning controls
Crumb tray (at rear)

PRODUCT SPECIFICATIONS

Power voltage /Frequency/Wattage: 220-240V/50-60Hz/800W

BEFORE THE FIRST USE

Before using your toaster for the first time, operate the toaster without bread once.
As with all new electric heating elements, your toaster will emit a ‘new’ smell when it is ﬁrst switched on. This is quite normal and not a cause for concern.

USING YOUR TOASTER

A) Making toast

Plug in the main socket.
Place the sliced bread into the slots.
Adjust the Browning control to your desired setting.
- 1=light, up to 7=dark.
Depress the Bread Carriage Lever. The toaster will be centered in the slot and begin toasting the bread.
Upon completion, it will automatically rise and lift the toast from the toaster.
Remarks: It is possible to re-adjust the toast lighter or darker by rotating the knob during the toasting program.

B) Additional Features Defrost Button

To toast frozen bread, place them into the bread slots and select the desired browsing setting.
Depress the bread carriage lever and then press the DEFROST button.
The DEFROST and CANCEL neon lights both illuminate.
The toaster will operate for a longer time for defrosting and toasting the bread.

Cancel Button

Press this Cancel button if you wish to interrupt the toasting process, for example, if the toast is too much browning or a fault occurred.

Reheat Button

To reheat the bread that has already toasted but gone cold, place the toasted bread into bread slots and press the REHEAT button.
The button will illuminate and the toaster will run for a short period to reheat the bread.

TIPS & HINTS

The type of bread, moisture content, freshness, thickness, and number of slices all affect the browning of toasting.
If you are going to toast two slices of bread side by side, it is recommended they are of equal size and freshness.
The overall thickness of the bread should not exceed 2.50cm otherwise it may cause burning or jamming within the Bread Slots.
If toasting one slice only, you may need to adjust the Browning Control to a slightly lower setting. You will notice a variation in toast color on one side of a single slice. The side facing the outside wall of the Bread Slot will be darker in color than the side facing the inner wall of the bread slot.
If the bread is jammed, disconnect your toaster from the socket, allow it to cool down then remove the bread. You may turn the toaster over and shake it gently on condition that it has completely cooled down and can be touched.
Stale bread toasts more rapidly than fresh bread. Therefore, the Browning Control should be set at a lower setting than usual

CARE AND CLEANING

Empty the Crumb Tray regularly to avoid the accumulation of crumbs which may cause ﬁre.
Location of Crumb Tray: at the rear of the toaster by pressing and sliding out from the toaster.
Empty it and replace it, push the lock back into place.
WARNING: Never operate the toaster without the Crumb Tray ﬁtted.
DO NOT immerse the toaster in water or put it in a dishwasher.
DO NOT use any sharp object or abrasive substance to clean the toaster, especially the toasting slots. Risk of Electric shock and damage to the toaster.
Wipe the outside of the toaster with a damp cloth.

ENVIRONMENT-FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical pieces of equipment to an appropriate waste disposal center.

Warranty

iNNOTECK-DS-5369-2-Slice-Toaster-fig-5

To register warranty please go to www.innoteck.co.uk
To activate your warranty, please register within 14 days of receiving your item.

Most warranty repairs are handled routinely but sometimes requests for warranty service may not be appropriate. For example, warranty service would not apply if the product damage occurred because of misuse, lack of routine, maintenance, shipping handling by third parties, warehousing, or improper installation. Similarly, the warranty is void if the manufacturing date or the serial number on the product has been removed or the equipment has been altered or modiﬁed. During the warranty period, the authorized service dealer at its option will repair or replace any part that upon examination is found to be defective under normal use and service.
The seller’s standard 12-month warranty applies to all products unless stated. You are legally covered for the first 12 months by the retailer. Within the first 12 months of ownership, you are entitled to a replacement or refund at the retailer’s discretion. Due to this being a legal requirement we cannot get involved during this period.
This warranty does not cover normal wear of any parts or damage resulting from any of the following negligent use or misuse of this product, improper voltage, or current use contrary to the operation instructions: deviation from the instructions regarding storage and transportation; repair or alteration by anyone other than Innoteck or an authorized service center. Further, the warranty does not cover acts of God such as ﬁre, ﬂood, hurricanes, or tornadoes. Infotech shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Except to the extent prohibited by applicable law any implied warranty of merchantability or ﬁtness for a particular purpose is limited in duration to the above warranty. This warranty gives you speciﬁc legal rights and you may also have other rights as stated in the UK Consumer rights laws that may vary slightly.
The only time we will replace spare parts under warranty is if they have become defective within the ﬁrst 12 months warranty. If you require any spare parts after the 12-month warranty has ended, you may be charged. Warranty does not apply to any accessories i.e. The guarantee is valid in the UK and Isle of Man only.
If your item has developed a fault the item would need to be returned to us for inspection.
We would require the full item to be returned to us along with your proof of purchase (this can be emailed to our customer service at service@.innoteck.co.uk ) and the completed returns form (you can obtain this form from our customer service team) which must be included within the parcel. Once the item has been returned to us our returns department will check the item to confirm the fault. They will then arrange for your item to be repaired or replaced if required.
If the product you have returned to us is end-of-line/discontinued or is out of stock may send you a like for replacement. We would ensure the speciﬁcation of the item is like the product you have returned.
Within three months of purchase, if any manufacturing defects are discovered the seller will arrange to pick up the item. After three months the purchaser or customer is required to send the item to us at their own expense. There may be times when the seller may request proof of purchase photo or video to assist us. A customer who is unable to send a photo or video will need to send the product to us (subject to the 3 months).
Please retain your proof of purchase/sales receipt and the packaging box.
The product is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as speciﬁed on the product rating label. (e.g……..220V-50Hz).