IRIS STF-360DC 360 Pedestal Fan Instruction Manual

IRIS STF-360DC 360 Pedestal Fan

IMPORTANT SAFEGUARDS

Prior to use, read the safety precautions carefully to ensure proper use. The precautions listed here are described under the classification of Warnings and Cautions, and are intended to prevent harm to users and other persons. All of these precautions are critical in terms of safety. Follow them at all times. Graphic symbol indications: Indicates content that could lead to death or injury if handled incorrectly.

• CAUTION
• PROHIBITED
• INSTRUCTIONS THAT MUST BE FOLLOWED

Disassembly prohibited.

• Do not disassemble, repair, or modify. Doing so can cause fire, electric shock, or injury.
• Repair by persons other than trained repair technicians can be dangerous.
• Warning: to reduce the risk of fire or electric shock, do not use this product with any solid-state speed control device.

Product use.

• Use on a level, stable floor. Placing product on uneven and unstable floors can cause the product to fall over, leading to injury or damage to property in the vicinity of the product.
• Always grasp the Power plug to unplug it, do not unplug it by pulling on the Power cord. Pulling on the Power cord can damage it, which can cause fire or electric shock.
• Always unplug the Power plug from the electrical outlet when the product will be unused for extended periods of time. Failing to do so can lead to fire or electric shock caused by short-circuits due to reduced insulation.
• Do not use this product near a water source, a bathroom or a wet and damp environment.
• Soaking the product in water or pouring water on it may cause fire or electric shock.
• Placing the product in direct sunlight, air conditioning, or a heating stove may lead to deformation or discoloration of the product, which may result in malfunction.
• Cleaning with chemicals such as discoloring agents, volatile oils, thinner, etc., may lead to discoloration or transformation.
• Do not operate the product around a radio or TV. Electromagnetic interference may affect the normal operation of the product.
• This product employs overload protection (fuse). A blown fuse indicates an overload or a short-circuit. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit occurred and the product should be discarded or returned to IRIS USA, Inc. for inspection and/or repair.
• Take proper precautions to prevent incorrect operation which may lead to death or serious injury.
• Observe warnings against the misuse of this product which may cause injury or property damage.

Located on cord tag.

• Use Only With a Fuse Rated 2.5 Amperes, 125 Volts.
• Always Unplug This Product Before Installing or Replacing Fuses.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

WARNING: for continued protection against risk of fire, replace only with same type and rating of fuse.

Unplug.

• Unplug the Power plug from the electrical outlet when performing maintenance, inspecting, or moving the product.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to circumvent this safety feature.
• Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.

Use Power plugs and Power cords correctly.

• Failing to do so can cause fire or electric shock due to short-circuits.
• Insert the Power plug securely all the way into the electrical outlet.
• Regularly remove dust from the Power plug.
• When dust is allowed to build up, insulation is hampered due to moisture, which can cause fire or electric shock.
• Use only 120 V~. Other current/voltage can cause fires.
• Do not use if the Power cord or the Power plug is damaged, or if the Power plug is loose when plugged into the electrical outlet. Doing so can cause fire or electric shock due to short-circuit.
• Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not run the cord under furniture or appliances. Arrange the cord away from high traffic areas and where it will not be tripped over.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not power on the product with the Power cord tangled.

Do not damage the Power cord.

• Damaging, modifying, forcefully bending, pulling, twisting, putting heavy objects, or pinching can damage the Power cord, which can cause fire or electric shock.
• Do not pull on the Power cord when carrying or storing the product. Pulling on the Power cord can cause fire or electric shock.

Abnormalities and malfunctions can cause smoke, fire, or electric shock.

In the case of abnormalities or breakdowns, stop using and immediately turn off the power supply and pull out the plug from the power socket. Failure to do so may result in fire or even electric shock.
Examples of Abnormalities

• Abnormal heating of the Power plug and cord.
• Power on intermittently when Power cord is moved.
• Abnormal sounds or peculiar smells.
• Breakdowns during operation.
• Burning pain caused by electric shocks when touching the product with the hands.
• Stop use and contact lRIS USA, Inc. customer service at 1-800-320-4747.

Avoid fire hazards.

• Do not spray with insecticides, hair sprays, or lubrication oils, etc.

• Do not use near flammable substances (kerosene, gasoline, paint thinner, etc.), objects that have flames
  (cigarettes, incense, etc.) or combustible materials. Can cause fires.

• Do not use the product with air flow pointed at a combustible appliance such as a heater. Doing so can cause incomplete combustion or scatter flames, which can cause carbon monoxide poisoning and fire.

• Do not put hand or objects from the gap in the front grille or back grille.

• Do not use the fan near curtains or strings for window shades.

WARNING: chemical burn hazard. Keep batteries away from children.

Wet hands prohibited.

• Do not unplug Power plug when hands are wet.

Do not use the product outdoors.

• Do not spray on the product (such as insect killer, hair dressing or grease).
• Keep the product away from flammable substances (kerosene, gasoline and paint thinner, etc.), objects with sparks (cigarettes, incense, etc) or flammable dust. Failure to do so may cause fire.
• Directing this product towards heating equipment such as homeheaters may cause sparks, carbon monoxide poisoning, fire, etc. due to incomplete combustion of the heater.
• The product is utilized indoors only.
• Do not use the product around any object that hinders ventilation.
• Do not cover the product with combustible items such as clothing, paper or plastic bags before use.
• Using the product in a place with too much dust or powder may cause fire or electric shock due to short circuit.

If handled incorrectly, contents can lead to personal injury or physical damage.

• Keep out of reach of children and infants.
• Sitting or leaning on the product may cause electric shock or other injuries.
• Do not drag the product when moving it. Dragging product can damage carpet and floors.
• Use extra caution when using product around those requiring additional supervision, such as children or the elderly.
• Air blowing directly on plants may be harmful.
• Do not operate without attaching the fan blade or the cover. Doing so can cause injury, electric shock, or fire.
• Do not strike the unit forcefully. Doing so can cause the product to malfunction, leading to fire or electric shock.
• Keep your face, body, and clothing away from rotating parts during operation.

User servicing instructions.

• If the fuse on your fan has blown, grasp the plug and remove it from the outlet. Do not pull the cord to unplug.
• To open, slide the fuse cover towards the prongs of the plug.
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• Remove fuse carefully.
• Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
• Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged.
• Only qualified service engineers can repair the product. Contact the retail store where you purchased the product or IRIS USA,Inc. customer service.
• This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• The cells shall be disposed of properly, including keeping them away from children. Even used cells may cause injury.

Warning To reduce the risk of fire or electric shock. Do not use this fan with any solid-state speed control device.

PARTS

Front

Back

Control panel

Indicator/Display

REMOTE CONTROL

Direct the infrared light-emitter of remote control towards the receiver of the front of the remote control.

How to replace the battery.

If the operating radius becomes reduced, or nothing happens when pressing the power button, replace the battery with a new one (CR2025).

1. Pull out the battery holder.
   • Press the claw in the direction of the arrow and pull out the battery holder.
2. Insert the new battery.
   • Insert the new battery into the battery holder in the right direction and insert it into the Remote control.
   • Do not confuse the positive and negative polarities of the battery.
   • Dispose the used battery as described in the battery package or in accordance with local regulations.

Precautions for battery.

• Pay attention to the polarity(plus ⊕and minus ⊖) and insert the battery correctly according to the instructions. Failure to do so may cause fire, injury, or deface the surrounding environment due to battery breaking or liquid leakage.
• Remove the battery if it is not used for a long time.
• Failure to do so may cause fire, injury or deface the surrounding area due to liquid leakage. In case of liquid leakage, wipe the liquid off the battery holder and replace with a new one. If you come in contact with the leaked fluid, wash out thoroughly with water.
• Do not disassemble. Attempting to disassemble may harm your skin and clothing.
• Do not carry or store with any objects made of metals. Carrying or storing with objects made of metal may cause liquid leakage or explosion due to short circuit.
• Do not use non-designated batteries. Using non-designated batteries may cause fire, injury, or deface the surrounding area due to battery breaking or liquid leakage.
• Do not charge coin batteries. Attempting to charge coin batteries may cause fire, injury or burn due to battery breaking or liquid leakage.

HOW TO ASSEMBLE

The fan is disassembled and all of the parts are packaged. Assemble the parts according the instructions.

• Store the packaging materials with individual packaging box as the packing materials are used to store the fan.

Caution

• Do not plug the Power plug until the fan is assembled completely.

Make sure that the Pole brace is inserted into the upper body securely .

1. Insert the Pole brace into the Base.
   • Insert the guide pins of the Pole brace into the holes of the Base.
   • The guide pins differ in size on the left and right. When looking at the base
   • from the front, set the larger sized guide pin in the right side when inserting the pole brace.
2. Insert the upper body into the Pole brace that was set to the Base in 1.
   • The guide pins differ in size on the left and right. When looking at the base from the front, set the larger sized guide pin in the right side when inserting the pole brace.
3. Insert the Remote control holder.
   • Insert the Remote control holder to the Pole brace where you would like it.

Adjust the height.

Caution

• Remove the Pole brace after unplugging the Power plug.
• Remove the Pole brace and insert the upper body into the Base to adjust the height.

How to dispose

• Dispose of the product or packaging materials in accordance with local regulations.

HOW TO USE

1. Put the fan on a flat and stable surface and plug the Power plug in to the outlet.
2. Press Power OFF/ON button.
   • If unplugged, the operation starts with the previous operation settings.
   • The power button of the Remote control can also be used for setting.
3. Select the speed.
   • Every time the speed button is pressed, the display switches as below and the speed changes. The continuous operation mode starts.
   • The speed button   of the Remote control can also be used for setting.

• If the fan is not operated for a certain period of time, the icon and value in the display will become dimmer.
• Pressing any buttons (other than the power button) during dimming will stop the dimming. Changing settings such as the mode will not change this. Press the power button to turn off the power.

Switch mode.

Set Rhythm mode, Sleep mode or Auto mode.

• Every time the mode button is pressed it will alternate between Rhythm mode, Sleep mode, Auto mode, or Continuous operation.

Rhythm mode

• Adjust the speed slowly to produce an air flow that imitates natural wind.
• Adjust the speed from 12 stages with the Speed button.

Sleep mode

• Adjust the speed from 12 stages with the Speed button.
• The air flow will be decreased gradually from the set air flow.
• The air flow will stop after 2 hours.
• Setting the Timer OFF can be released. Timer OFF cannot be set.

Auto mode

• The room temperature will be detected automatically and the speed will be adjusted automatically.
  • Every time the Speed button is pressed, the continuous operation will start with the Speed of Auto mode.
  • Adjust the setting again to use Timer OFF.

Stop.

Press the power button to stop operation.

• The power button of the remote control can also be used for setting.
• The power will be turned off and the operation will stop.

Timer OFF.

Press OFF/ON Timer Button during operation to set the Timer OFF.

• Every time the OFF/ON Timer Button is pressed, time will be switched as below and start Timer OFF. (You can set between 30 minutes and 8 hours.)
  • The Timer button of the Remote control can also be used for setting.
• During Timer OFF operation, the display will change according to the remaining time. After the set time has passed, the power will be turned off and the operation will stop.
  • During Timer OFF operation, the display will alternate between the speed set currently and the remaining time on the timer.

Timer ON.

Press OFF/ON Timer Button during operation being stopped to set the Timer ON.

• Every time the OFF/ON Timer Button is pressed, time will be switched as below and Timer ON will start. (You can set between 30 minutes and 4 hours.)
  • The Timer button of the Remote control can also be used for setting.
• During Timer ON operation, the display will switch according to the remaining time. After the set time is passed, the power will be turned on and the operation will start.

Oscillation.

360° Oscillation.

• Press the button to turn on the indicator and oscillate 360 degrees •
• The oscillation button of Remote control can also be used for setting.•
• Press the button again to turn off the oscillation indicator and stop the operation.

The angles can be adjusted manually but adjusting forcibly may damage the fan.

Lateral direction.

• Press the oscillation button to turn on the oscillation indicator  and oscillate left and right.
• The oscillation  button of the Remote control can also be used for setting.
• Press the button again to turn off the oscillation indicator and stop operation.

CLEANING AND MAINTAINANCE

Caution

• Make sure to turn off the power and unplug from the outlet before cleaning and maintenance.

Do not use detergent, thinner, benzine, bleaching agents, etc.

Pole brace, Base. Wipe with a soft cloth.

• To remove stubborn stains, wipe with a cloth soaked in diluted detergent and remove the detergent with a wrung cloth.

Front grille, Back grille, Fan blade.

Remove 4 screws in the back of Front grille and remove the Front grille and clear away dust with a cleaner, etc.

• The Fan blade cannot be removed.
• After cleaning, set the Front grille in the opposite procedure.

Storage.

If you do not use the product for an extended period of time, disassemble it in the opposite procedure, and cover with a plastic bag. Then put it in an individual box and store in a dry environment.

TROUBLESHOOTING

Before making repairs, read the following content carefully to fix common problems.

The fan cannot be operated with the Remote control

| The battery has died| Replace with new batteries .
The positive and negative polarities of the batteries (front and back) have been set incorrectly|

Set the battery in the right direction .

There is a blockage between the Remote control receiver and Remote control| Remove the blockage .

The remote control is not directed towards the right direction

| Within 4 meters, direct the infrared light-emitter of the Remote control towards the Remote control receiver of the Control panel .
High operating noise| The product is not placed in a level surface and main unit rocks| Use this product on a smooth surface .
When oscillating, the fan is vibrating| When oscillating, the Motor- specific sounds can become noisy| This is normal .

If the problem persists, contact IRIS USA, Inc. Customer Service Department or a qualified professional.

Warning: Do not disassemble, repair or modify the product yourself. Any other servicing should be performed by any authorized service representative.

SPECIFICATIONS

in/325 X 330 X 890 mm
PRODUCT WEIGHT (INCLUDING POWER CODE)| 6 .39 lbs/2 .9 kg
POWER CORD LENGTH (APPROXIMATELY)| 70 .9 in/ 1 .8 m

Specifications are subject to change without prior notice.

WARRANTY

MANUFACTURER 1-YEAR WARRANTY

THE MANUFACTURER WARRANTS

IRIS USA, Inc. products are to be free from defects in material and workmanship under normal non-commercial, household use, when operated and cared for in accordance with the Manufacturer’s written instructions provided.

THE 1-YEAR WARRANTY (“WARRANTY”) DOES NOT COVER

Any damage caused by accident, misuse, or abuse, including without limitation, damage caused by use in a humid
area, improper cleaning, neglect, alteration, fire, theft, non-recommended temperature use and does not apply to minor imperfections, scratches, stains, discoloration, surface markings as a result of shipping or other damage to external or internal surfaces which does not impair the utility and/or functionality of the product.

TO OBTAIN SERVICE

If service should be necessary, you should contact IRIS USA, Inc. Customer Service (“Customer Service”) at 1-800-320-4747. You may then return the properly packaged product(s), (using adequate packing and shipping material to prevent damage in transit), with postage prepaid along with name, address, telephone number, model number, and proof of date of purchase (a copy of the receipt) and a detailed description of the claimed defect. This warranty shall not cover any damage incurred to the products during transit to Customer Service. You shall have the obligation and responsibility to: pay for all services and parts not covered by the warranty.
MANUFACTURER’S OBLIGATION

The Warranty may not be altered, expanded, extended, revised or varied except by written instrument executed by the Manufacturer.
THE MANUFACTURER’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT(S) AT THE MANUFACTURER’S SOLE AND EXCLUSIVE OPTION. THE MANUFACTURER WILL REPLACE ANY ITEM FOUND TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITH THE MOST COMPARABLE CURRENT ITEM. IRIS USA, INC. DOES NOT ACCEPT SPECIAL REQUESTS, NOR DO WE HAVE THE ABILITY TO UPGRADE IN EXCHANGE FOR MONEY. THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER DIRECT OR INDIRECT. THE WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE AND NO OTHER WARRANTIES, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PA RTICULAR PURPOSE OR USE ARE MADE WITH RESPECT TO THE PRODUCTS. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation exclusions may not apply. This Warranty gives specific legal rights, and there may also be other rights which vary from state to state.

DISCONTINUED ITEM RETURNED

If the item returned is discontinued and is no longer available, IRIS USA, Inc. will automatically replace your item with the most comparable item currently manufactured.

Attn: Customer Service (Returns Department) IRIS USA, Inc.13423 West Cactus Road Surprise, AZ 85379 ©2021 IRIS USA, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>