LECTRIC eBIKES Wireless eBike Speaker User Guide
- June 16, 2024
- LECTRIC eBIKES
Table of Contents
LECTRIC eBIKES Wireless eBike Speaker User Guide
SPECIFICATION
Bluetooth Version: 5.2 Speaker: φ52mmX2
Transmission Distance: 10m SNR: > 85dB Frequency
Response: 20Hz-20KHz
Distortion: < 1% Operating Voltage: 3.7V Input Voltage: DC5V
Weight: 500g
Dimensions: 7575185mm
POWER ON/OFF ****
Power ON / OFF: Long press 3 seconds Reset: Long press 8 seconds
MODE SWITCHING ****
Single click: Mode switching
BLUETOOTH MODE ****
Single click: Play / Pause
Long Press: Last Long Press: Next
Single click: Volume – Single click: Volume +
AUX MODE ****
Connect with audio cable, it will switch to aux mode after hearing the warning tone “Line in Mode”
Single click: Play / Pause
Single click: Volume –
Single click: Volume +
BLUETOOTH PHONE CALL ****
Single click: Answer / End Call
Long Press: Reject to answer the call Double Click: Call back the last outgoing call
**BLUETOOTH PHONE CALL**
Single click: Answer / End Call
Long Press: Reject to answer the call Double Click: Call back the last
outgoing call
**TFCAR/USBMODE**
Insert the TF card or U disk to initiate the prompt tone “Music Mode”
to play the songs in the TF card.
**CHARGER**
• The speaker needs to be recharged when you hear the voice prompt of “Low Battery Please Charge.”
• When charging, the red light is on, and when charged, the red light is off.
• Please use the provided charger to charge your speaker.
|
**NOTICE**
• Do not throw this product into fire or water.
• Do not modify, repair, or dissemble the speaker.
• Do not allow the speaker to come in contact with combustible materials in any way.
• Please keep the device away from damp and dusty environments.
• Before charging ensure your charger is approved for use with the speaker.
• Do not use the Bluetooth function while charging.
• The device will automatically lose power when it is in standby. It is recommended to charge the speaker once a month.
**TWS CONNECT**
When both machines are turned on and within a 10m distance, long press the M button to connect them. After the first connection is successful the subsequent connection will be automatic.
---|---
Speaker and mobile phone must be within 10m in order to maintain connection. If over this distance your mobile device may disconnect or sound quality may decline.