LECTRIC EBIKES 1.0 Electric XP Trike User Manual
- June 12, 2024
- LECTRIC eBIKES
Table of Contents
1.0 Electric XP Trike
Product Information
Product Name: Lectric XP Trike 1.0
Version: V 1.1 | 2023
Manufacturer: Lectric eBikes
Contact Information:
- Email: [email protected]
- Phone: 602-715-0907
- Website: lectricebikes.com
- Lectric Help Center: help.lectricebikes.com
Serial Number: The serial number can be found on the head
tube of your bicycle. Please refer to page 16 of the manual for the
exact location.
Product Usage Instructions
1. Read the Owner’s Manual: Before riding your Lectric XP
Trike, it is crucial to read and understand the entire Owner’s
Manual. This manual contains important safety, performance, and
service information. You can find the latest version of the manual
at lectricebikes.com/manual.
2. Rider’s Responsibility Regarding Regulations: It is
your responsibility to comply with the regulations that apply to
your Lectric XP Trike. These regulations vary by state and
municipality, covering aspects such as minimum rider age, driver’s
license requirements, insurance, license plate, traffic rules,
maximum speed limits, and more. Ensure you are aware of and follow
the local regulations.
3. Intended Use: The Lectric XP Trike is intended for use
by one adult rider (18 years and older) for general transportation
and/or recreational purposes. It is not designed for off-road or
mountain bicycle use, jumping, or towing other bicycles. Riders
should be proficient cyclists and ride on paved surfaces, roadways,
or dedicated bicycle-only lanes where permitted by law.
4. Maintenance and Service: This Owner’s Manual does not
cover comprehensive service, repair, or maintenance instructions.
For any service, repair, or maintenance needs, please consult your
local bicycle shop. They can also provide information on classes,
clinics, or books related to bicycle use, service, repair, and
maintenance.
5. Moving and Storing: When moving or storing your
Lectric XP Trike, follow the guidelines provided in the manual to
ensure its safety and longevity.
6. Disposal: If you need to dispose of your Lectric XP
Trike, refer to the disposal instructions provided in the
manual.
7. Troubleshooting: In case of any issues or problems
with your Lectric XP Trike, consult the troubleshooting section of
the manual for guidance.
8. User Maintenance Instructions: The manual includes
user maintenance instructions that you should follow to keep your
Lectric XP Trike in optimal condition.
Note: For additional assistance or information, you can
contact Lectric eBikes through the provided contact
information.
OWNERS MANUAL
Lectric XP Trike 1.0
XP TRIKE
V 1.1 | 2023 www.lectricebikes.com
602.715.0907
To prevent PROPERTY DAMAGE, SERIOUS INJURY, or DEATH, you should read, understand, and follow the warnings and instructions in this manual. Keep for future reference.
LECTRICEBIKES.COM | 602.715.0907
1
WELCOME TO THE LECTRIC EBIKES FAMILY
Thank you for purchasing a Lectric eBike. Please read this Owner’s Manual
carefully before setting up your bicycle and riding. You should become
thoroughly familiar with the proper operation of your Lectric eBike, its
features, capabilities, and limitations. To ensure a long, trouble-free life
for your Lectric eBike, provide it with the proper care and maintenance as
described in this manual. Of course, it is not practical or possible to warn
you about all of the hazards associated with operating or maintaining your
Lectric eBike, for this, you must use your own good judgment. For replacement
parts and accessories, you should always use Lectric eBikes approved parts, as
they have been specially designed for your bicycle and manufactured to meet
Lectric eBikes’ demanding standards. This manual should be considered a
permanent part of your bicycle and should remain with the bicycle when it is
sold. If you need any assistance, please do not hesitate to reach out to us.
CONTACT INFORMATION
Email: [email protected] Phone:
602-715-0907 Website: lectricebikes.com
Lectric Help Center: help.lectricebikes.com
SERIAL NUMBER
Please record your bicycle’s serial number in the space below. The serial
number is located on the head tube of your bicycle. Refer to “Serial Number”
on page 16 for the location of the serial number.
LECTRICEBIKES.COM | 602.715.0907
2
TABLE OF CONTENTS
Important Safety Information
4
Getting Started
14
Features
28
Cockpit System
31
Preparing to Ride
40
Your First Ride
40
Battery Pack
42
Moving and Storing your Lectric eBike
53
Disposal of Your Lectric eBike
53
Troubleshooting
54
User Maintenance Instructions
56
Legal
59
Scan the QR code to find the latest version of your manual.
Or go to lectricebikes.com/manual
LECTRICEBIKES.COM | 602.715.0907
3
IMPORTANT SAFETY INFORMATION
Read and Understand Owner’s Manual Before Riding
Read this entire Owner’s Manual before you take the first ride on your new
eBike and keep it for reference. This Owner’s Manual contains important
safety, performance, and service information. The latest version of your
manual is available at lectricebikes.com/manual
Like any sport, bicycling involves risk of injury and damage. By choosing to
ride a bicycle, you assume the responsibility of that risk: you need to know
and practice the rules of safe and responsible riding as well as proper use
and maintenance. Proper use and maintenance of your bicycle reduces the risk
of injury. With an electric bike there is risk of fire or electric shock. If
you have any questions or do not understand any aspect of using or maintaining
your bike, take responsibility for your safety and consult with your local
bicycle shop, or contact us for assistance.
This manual is not intended as a comprehensive use, service, repair or
maintenance manual. Please see your local bicycle shop for all service,
repairs, or maintenance. Your local bicycle shop may also be able to refer you
to classes, clinics, or books on bicycle use, service, repair, and
maintenance.
Your Lectric eBike (XP Trike) is classified as an EPAC (Electrically Power
Assisted Cycle, otherwise known as a Pedelec), and is referred to in this
manual as a bicycle unless otherwise noted.
Rider’s Responsibility Regarding Regulations
It is the rider’s responsibility to obey the regulations that apply to your
Lectric eBike.
The regulations covering the use of your Lectric eBike vary by state, and even
municipality in certain locations. You must comply with the local regulations
related to the minimum age of the rider, driver’s license, insurance, license
plate, traffic, and maximum speed regulations, and any other regulations.
These regulations may change at any time.
LECTRICEBIKES.COM | 602.715.0907
4
Intended Use
The intended use of your Lectric eBike is to be ridden by one adult rider (age
18 and up) at an appropriate time and place for general transportation and/or
recreational use. Any other use is prohibited and may result in SERIOUS INJURY
or DEATH.
Your bicycle is NOT INTENDED for off-road or mountain bicycle use, or for any
kind of jumping. Some of these bicycles have suspension features, but these
features are designed only to add comfort, not off-road capabilities.
Riders should be proficient cyclists (ages 18+), riding on paved surfaces
where the tires are always on the ground, on roadways, or dedicated bicycle-
only lanes where permitted by law (not on pedestrian-use shared lanes or
sidewalks). Your bicycle should not be used to tow another bicycle. For
trailer towing, consult this Owner’s Manual and the trailer owner’s manual for
towing instructions and towing compatibility.
Safety Messages
WARNING!
To prevent serious injury or death:
· Read all safety warnings and all instructions. · Always ride within your
limits and the limits of your Lectric eBike. · Bicycles are only for use by
persons 18 years of age and above.
Riders must have the physical coordination, reaction, and mental capabilities
to control a bicycle and manage traffic, in addition to managing road
conditions and sudden situations with respect to the laws and instructions
governing bicycle use. Persons with any mental or physical conditions that may
make them susceptible to injury, impair their physical dexterity or mental
capabilities to recognize, understand, and follow safety instructions–or
understand the hazards inherent to its use–should not use or be permitted to
use products inappropriate for their abilities. · Never ride under the
influence of drugs and/or alcohol.
LECTRICEBIKES.COM | 602.715.0907
5
· Consult a doctor before using the device if you have any medical condition
or issue that affects your ability to safely perform physical activities, or
if you:
are or may be pregnant;
have heart, respiratory, back, joint, or other orthopedic conditions;
have high blood pressure;
have difficulty with physical exercise; or
have been instructed to restrict physical activity.
· Always keep small parts away from children. Some eBike accessories may
present a choking hazard to small children.
· Never modify your frame or bicycle in any way. Do not sand, drill, file, or
remove parts from your bicycle. Do not install incompatible components or
hardware.
· Always use proper lifting techniques to prevent injury. Your eBike may be
significantly heavier than a bicycle without a battery pack and a motor.
· Take responsibility for your own SAFETY. If you have any questions or do not
understand any aspect of using or maintaining your bicycle, contact Lectric
eBikes at [email protected] or call
602-715-0907.
Helmets
· Always wear a helmet. Wearing a helmet properly may reduce the risk of a
severe head injury. When riding, always wear a helmet that meets or exceeds
the standards of the Consumer Product Safety Commission (CPSC). Check the
manual that comes with your helmet.
· Ensure your helmet fits your head and is properly secured. If you attach a
child’s seat to the bicycle, the child must wear a properly fitted helmet at
all times.
· Read your helmet manual to make sure it is adjusted properly according to
the fitting instructions provided by the helmet manufacturer.
· A proper-fitting helmet should be comfortable and should neither rock
forward/backward nor side to side.
LECTRICEBIKES.COM | 602.715.0907
6
Follow eBike Regulations On and Off the Road
· Be aware of eBike regulations in your area. Generally, the regulations for
the use of an electric bicycle are the same as those for a standard bicycle.
However, there may be local differences such as where you can ride, minimum
rider age, or required equipment and license and registration regulations. It
is your responsibility to know the local regulations that apply to an electric
bicycle and to obey them.
Ride at Your Own Risk and Use Common Sense
· Always keep both hands on the handlebar grips and the brake levers so they
are within reach while riding.
· Do not ride distracted. Always remain alert to all riding conditions. Using
the Display or other technology (including your mobile phone or music player)
could distract you from riding. Only adjust the Display when stationary and in
a safe start-up position.
· Never use headphones or a cell phone to talk or text when riding.
· Always ride defensively. Watch out for potential obstacles that could force
you to swerve suddenly or lose control. Braking while steering may reduce your
ability to control your bicycle.
· Look ahead and brake sooner. You may be moving faster on your eBike, and it
may be heavier compared to a bicycle, which means you may need to react and
brake sooner when riding. Other road users may not expect you to be traveling
at higher speeds. Riding faster may increase your risk of a crash.
· Stop pedaling well before approaching corners to avoid entering a corner too
quickly. You should also pay particular attention to terrain conditions as you
may approach obstacles faster than expected.
LECTRICEBIKES.COM | 602.715.0907
7
Riding at Night
· Riding at night comes with more risks than riding during the day due to
decreased visibility; riders are encouraged to exercise increased caution in
nighttime conditions.
· Turn lights ON for safety. For increased visibility, ensure that the front
headlight and rear taillight are turned ON and adjusted such that other people
on the road can see them clearly. Also check your front and rear wheel
reflectors.
· Riders should wear reflective clothing at night. You may want to attach
additional flashing lights to your clothing or helmet.
Riding in Wet Conditions
· Use caution when riding in wet conditions as it will take longer to brake
and to stop. Your tires may slip when turning. Risk of a crash is dramatically
increased in wet conditions.
· Your electric bicycle can withstand light rain and small splashes, but it is
not designed to be subjected to inclement weather, extremely heavy showers, or
submersion in water. The electric bike’s components have an IP rating of 65.
Water damage is not covered under the warranty.
Pre-Ride Safety Checklist
Lectric eBikes recommends going through each item on the pre-ride safety
checklist before and after each ride. Spending time to make sure all of the
bike’s components are in good working order before a ride is a crucial step
along the way to a safe and fun ride.
This checklist is not intended to function as a detailed service manual. Be
sure to read your entire owner’s manual before riding or repairing your bike.
If you do not have the expertise required to perform any of these checks,
Lectric eBikes recommends having your local bike shop mechanic perform a
detailed safety check of your bike in regular intervals. Ensure your local
mechanic is experienced and reputable.
LECTRICEBIKES.COM | 602.715.0907
8
Before each ride, inspect your eBike for damage. If damage is found, do not
ride.
Verify that the front and rear axles are secure.
Check that the front and rear tire pressure is within the recommended pressure
range printed on the tire sidewall.
Pull the brake levers to ensure the brakes are working properly and adjust if
necessary.
Visually inspect the bike for damage or anything out of the ordinary.
Turn on the lights, especially if riding at night.
Make sure all hardware is tightened to the recommended torque specifications
found in “Tightening Torque” on page 27 of the owner’s manual.
Verify that the frame folding latch is securely closed and locked.
Verify that the stem folding latch is securely closed and locked.
Check that the handlebar stem is inserted past the minimum insertion point.
The minimum insertion point is labeled near the bottom of the handlebar stem.
Check that the handlebar Stem Clamp Bolt is closed and tightened to 10-12 N·m
and the Stem Riser is closed and tightened to 20 N·m or till it leaves an
impression on your hand.
Check that the seat post is inserted past the minimum insertion point. The
minimum insertion point is labeled on the seat post.
Check that the seat post collar and clamp are closed and tightened to 20 N·m
(labeled as Seat Rail Binder in “Tightening Torque” on page 27) or till it
leaves an impression on your hand.
LECTRICEBIKES.COM | 602.715.0907
9
Check that the seat cannot be twisted out of position, and set the height to a
safe position that makes it easy to mount and dismount the bike.
Check the condition of the chain to see if it needs cleaning or lubrication.
Wear a helmet and high visibility clothing.
NEVER exceed the maximum total weight limit of 415 lbs. (188 kg). The rear
rack can hold a maximum of 75 lbs. (34 kg). The front rack can hold a maximum
of 35 lbs. (16 kg). The rider maximum weight is 330 lbs (150 kg). As an
example, if you have 40 lbs (18 kg) of cargo, then the maximum weight of the
rider remains 330 lbs (150 kg).
Only carry the cargo you need. More weight will drain the battery faster and
affect how the bike handles.
Ensure all components are properly secured.
Make sure your battery is fully charged.
LECTRICEBIKES.COM | 602.715.0907
10
Signal Words, Warnings, and Caution Statements
This Manual contains many “Warnings” and “Cautions” concerning the
consequences of failure to maintain or inspect your bicycle and of failure to
follow safe cycling practices.
DANGER WARNING
WARNING!
CAUTION
CAUTION
NOTICE
Indicates a hazardous situation that, if not avoided, will result in death or
serious injury.
The combination of the safety alert symbol and the word WARNING indicates a
hazardous situation that, if not avoided, could result in death or serious
injury.
The combination of the safety alert symbol and the word CAUTION indicates a
hazardous situation that, if not avoided, could result in minor or moderate
injury, or is an alert against unsafe practices.
The word CAUTION used without the safety alert symbol indicates a situation
which, if not avoided, could result in serious damage to the bicycle or the
voiding of your warranty.
Indicates information considered important, but not hazard-related (e.g.
messages relating to property damage).
Symbol Index
Safety Alert Symbol. This symbol is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible serious injury or death.
Safety Alert Symbol. Read, understand, and follow the warnings and
instructions in this manual.
LECTRICEBIKES.COM | 602.715.0907
11
On-Product Warning Labels
There are warning labels on your Lectric eBike for your protection. If a label
is missing or is not legible, contact Lectric eBikes for a replacement.
Stem label
Class 2 label
States that recognize three classes of eBikes require a label to be placed on the bicycle denoting the class of your Lectric eBike, the motor’s wattage rating, and the top speed of your Lectric eBike. Your bicycle comes as a Class 2 bicycle by default and has a label with this information posted under the carry handle, near the seat post on the bicycle.
LECTRICEBIKES.COM | 602.715.0907
12
On-Product Warning Tags
There are warning tags on your Lectric eBike for your protection. If a tag is
missing or is not legible, contact Lectric eBikes for a replacement.
WARNING
STEM WARNING TAG WARNING: BE SURE THE FRONT WHEEL AND HANDLEBAR/STEM ARE
SECURE BEFORE EACH RIDE. FAILURE TO DO SO COULD CAUSE THE HANDLEBAR/STEM TO
COME LOOSE RESULTING IN DAMAGE TO THE BIKE, PROPERTY, OR SERIOUS INJURY AND/OR
DEATH. For more information, please review the owner’s manual available online
at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA TIJA DEL MANILLAR ADVERTENCIA: ASEGÚRESE DE QUE LA
RUEDA DELANTERA Y EL TIJA DEL MANILLAR ESTÉN ASEGURADOS ANTES DE CADA USO. SI
NO LO HACE, EL TIJA DEL MANILLAR PODRÍA AFLOJARSE, LO QUE PODRÍA PROVOCAR
DAÑOS A LA BICICLETA, LA PROPIEDAD O LESIONES GRAVES Y/O LA MUERTE. Para
obtener más información, consulte el manual del propietario disponible en
línea en help.lectricebikes.com
(Stem Warning Tag)
WARNIN G
AXLE WARNING TAG WARNING: KEEP ALL HANDS, FEET, AND LOOSE STRING CLEAR OF THE
REAR ROTOR AND, REAR AXLE. FAILURE TO DO SO COULD RESULT IN DAMAGE TO THE
BIKE, PROPERTY, OR SERIOUS INJURY AND/OR DEATH. For more information, please
review the owner’s manual available online at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DEL EJE ADVERTENCIA: MANTENGA LAS MANOS, LOS PIES Y LA
CUERDA SUELTA ALEJADOS DEL ROTOR TRASERO Y DEL EJE TRASERO. EL NO HACERLO
PODRÍA RESULTAR EN DAÑOS A LA BICICLETA, LA PROPIEDAD O LESIONES GRAVES Y/O LA
MUERTE. Para obtener más información, consulte el manual del propietario
disponible en línea en help.lectricebikes.com
(Axle Warning Tag)
WARNIN G
FRAME DROPOUT WARNING TAG WARNING: DO NOT ATTEMPT TO ADJUST, OR LOOSEN THE
BOLTS IN THIS AREA. FAILURE TO DO SO COULD CAUSE YOUR FRAME TO COME LOOSE
RESULTING IN DAMAGE TO THE BIKE, PROPERTY, OR SERIOUS INJURY AND/OR DEATH. For
more information, please review the owner’s manual that shipped with your
bike, and which is available online at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DE CAÍDA DE CUADRO ADVERTENCIA: NO INTENTE AJUSTAR O
AFLOJAR LOS TORNILLOS EN ESTA ÁREA. SI NO LO HACE, EL CUADRO PODRÍA AFLOJARSE
Y CAUSAR DAÑOS A LA BICICLETA, A LA PROPIEDAD O LESIONES GRAVES Y/O LA MUERTE.
Para obtener más información, consulte el manual del propietario que se envió
con su bicicleta y que está disponible en línea en help.lectricebikes.com
(Frame Dropout Warning Tag)
WARNING
HELMET WARNING TAG WARNING: ALWAYS WEAR A HELMET WHILE RIDING A BIKE. FAILURE
TO DO SO COULD RESULT IN SERIOUS INJURY AND/OR DEATH. For more information,
please review the owner’s manual available online at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DE CASCO ADVERTENCIA: USE SIEMPRE UN CASCO MIENTRAS
ANDA EN BICICLETA. SI NO LO HACE, PODRÍAN PRODUCIRSE LESIONES GRAVES Y/O LA
MUERTE. Para obtener más información, consulte el manual del propietario
disponible en línea en help.lectricebikes.com
(Helmet Warning Tag)
WARNING
FRONT WHEEL WARNING TAG WARNING: BE SURE THE FRONT WHEEL IS PROPERLY INSTALLED
BEFORE EACH RIDE. FAILURE TO DO SO COULD CAUSE THE WHEEL TO COME LOOSE WHILE
RIDING RESULTING IN DAMAGE TO THE BIKE, PROPERTY, OR SERIOUS INJURY AND/OR
DEATH. For more information, please review the owner’s manual available online
at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DE LA RUEDA DELANTERA ADVERTENCIA: ASEGÚRESE DE QUE LA
RUEDA DELANTERA ESTÉ CORRECTAMENTE INSTALADA ANTES DE CADA USO. SI NO LO HACE,
LA RUEDA PODRÍA AFLOJARSE MIENTRAS CONDUCE, LO QUE PODRÍA PROVOCAR DAÑOS A LA
BICICLETA, LA PROPIEDAD O LESIONES GRAVES Y/O LA MUERTE. Para obtener más
información, consulte el manual del propietario disponible en línea en
help.lectricebikes.com
(Front Wheel Warning Tag)
WARNING
BATTERY WARNING TAG WARNING: FAILURE TO FOLLOW THESE AND OTHER WARNINGS AND
INSTRUCTIONS PROVIDED IN THE OWNER’S MANUAL MAY RESULT IN PRODUCT FAILURE,
VOIDING THE WARRANTY, OR SERIOUS INJURY OR DEATH OR PROPERTY DAMAGE. For more
information, please review the owner’s manual available online at
help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DE LA BATERÍA ADVERTENCIA: EL INCUMPLIMIENTO DE ESTAS
Y OTRAS ADVERTENCIAS E INSTRUCCIONES PROPORCIONADAS EN EL MANUAL DEL
PROPIETARIO PUEDE PROVOCAR LA FALLA DEL PRODUCTO, LA ANULACIÓN DE LA GARANTÍA,
O LESIONES GRAVES O LA MUERTE O DAÑOS A LA PROPIEDAD. Para obtener más
información, consulte el manual del propietario disponible en línea en
help.lectricebikes.com
(Battery Warning Tag)
WARNING
SEAT POST WARNING TAG WARNING: BE SURE THE SEAT HEIGHT IS CORRECTLY SET AND
THE SEAT POST IS SECURED BEFORE EACH RIDE. FAILURE TO DO SO COULD CAUSE THE
SEAT POST TO COME LOOSE RESULTING IN DAMAGE TO THE BIKE, PROPERTY, OR SERIOUS
INJURY AND/OR DEATH. For more information, please review the owner’s manual
available online at help.lectricebikes.com
ETIQUETA DE ADVERTENCIA DEL POSTE DEL ASIENTO ADVERTENCIA: ASEGÚRESE DE QUE LA
ALTURA DEL ASIENTO ESTÉ POSICIONADA CORRECTAMENTE Y QUE EL TIJA ESTÉ
ASEGURANDO ANTES DE CADA USO. SI NO LO HACE, EL TIJA PODRÍA AFLOJARSE, LO QUE
PODRÍA PROVOCAR DAÑOS A LA BICICLETA, LA PROPIEDAD O LESIONES GRAVES Y/O LA
MUERTE. Para obtener más información, consulte el manual del propietario
disponible en línea en help.lectricebikes.com
(Seat Post Warning Tag)
Yoohfuiar5niv0mciet-ai1paba0ollre0rbetsrampe, nuasittpkoat-oorbi
nk8leeep0nsbe-s,1iruaki6onre0eddmk.ycmRoeheuc,aghrai nuabn(lnidwaRkirceebi
liloaprneslrestmterpWrfdeeaohtcirccnemtohiseonaalnsn)fasettfuecaenrtnieaaod-
nnnutdspui nnfcoiuetanni-
nauytlplooobsuorreriasdarbeeekin.k-v.ieneAarplywfetaer iyrosydo ur
LECTRICEBIKES.COM | 602.715.0907
Efnutselpulnyrrsoesipeotehanreteleydfdrioaninnnstdttahwslelheecefdouearrlkenalddxylrselooe(pnFccourkuoutersntedstd.aWwCrreehihtgpeheurceotlklha)perieflyrltolhyacenikndainsxbtglaeellfelnoevurdeet:rsepaarrcoehperirdlye.
13
GETTING STARTED
Your bicycle comes fully assembled. These instructions are intended to assist
you in setting up and getting familiar with your new bicycle.
After you make your first adjustments and inspect your bicycle, we recommend
seeking professional help from a reputable and certified bicycle mechanic to
check your bicycle before your first ride. Before removing the packaging
material from your bicycle, remove all items from the box and make sure you
have the following:
What’s in the Box:
XP TRIKE
Lectric XP Trike
Lectric eBike Charger
2 Battery Keys
If anything is missing or is damaged, contact Lectric eBikes immediately for
assistance. For a video about how to setup your bicycle, visit our YouTube
page: Lectric eBikes, youtube.com/LectriceBikes
LECTRICEBIKES.COM | 602.715.0907
14
Bike Diagram
LECTRICEBIKES.COM | 602.715.0907
15
Serial Number
Your serial number is located on the head tube of the bicycle as shown below.
Please write it down inside the front cover of this manual.
You may be asked for your bicycle’s serial number as part of a warranty
request. You may also be asked to provide this number to law enforcement if
your bicycle is stolen.
Setting Up Your eBike
NOTE: This manual is not intended to be an extensive reference book about
service, maintenance, and/or repairs. You can find more information on our
website: lectricebikes.com and our help center: help.lectricebikes.com
LECTRICEBIKES.COM | 602.715.0907
16
Stem Folding How to Unfold the Stem
To unfold and secure in riding position:
1. Begin with handlebars in the folded down position. 2. Pull the handlebar
stem to its upright position. 3. Push the latch in firmly until it locks in
position. 4. Pull on the latch to confirm it is locked and the handlebars
cannot fold.
1
2
3
4
If the latch does not stay locked, please contact the Lectric Customer Service department for adjustment instructions.
LECTRICEBIKES.COM | 602.715.0907
17
How to Fold the Stem
To fold the stem down:
1. Pull up on the silver button labeled “open” to unlock the latch. 2. Pull
the latch away from the stem while still holding the “open” button. 3. Fold
the stem by lowering it to the side.
1
2
3
4
LECTRICEBIKES.COM | 602.715.0907
18
Adjust Handlebar Height
WARNING!
· Always tighten fasteners to the correct torque to prevent serious injury or
death. Bolts that are too tight can stretch and deform. Bolts that are too
loose can move and fatigue. Either condition can lead to a sudden failure of
the bolt and result in a crash. See “Tightening Torque” on page 27.
· Always insert the telescoping stem past the minimum insertion point marked
on the stem. A stem that is positioned too high can damage the bike and can
cause you to lose control and crash.
Select a height that is comfortable for you. DO NOT extend past the maximum extension point. To adjust your handlebars, unlatch the clamp. Move the handlebars to the desired height and close the clamp. Re-tighten the stem clamp to the recommended torque. See “Tightening Torque” on page 27.
LECTRICEBIKES.COM | 602.715.0907
Adjust Handlebar Position
1. Use a 5mm hex key to loosen the four face plate bolts on top of the stem
and move your bars to your desired position.
2. Once your bars are in a good position, tighten the four face plate bolts
on top of the stem to the value listed in “Tightening Torque” on page 27.
19
Adjust Seat Height
WARNING!
· Always tighten fasteners to the correct torque to prevent serious injury or
death. Bolts that are too tight can stretch and deform. Bolts that are too
loose can move and fatigue. Either condition can lead to a sudden failure of
the bolt and result in a crash. See “Tightening Torque” on page 27.
· ALWAYS insert seat post past the minimum insertion point marked on the seat
post. A seat post that is positioned too high can damage the bike and can
cause you to lose control and crash.
Correct seat adjustment is an important factor in getting the most performance
and comfort from your bicycle. If the seat position is not comfortable for
you, you may want to go to your local bicycle shop for assistance.
To achieve correct seat height:
· Sit on the seat;
· Place one heel on a pedal;
· Rotate the crank until the pedal with your heel on it is in the down
position and the crank arm is parallel to the seat tube.
If your leg is not completely straight, your seat height needs to be adjusted.
If your hips must rock for your heel to reach the pedal, the seat is too high.
If your leg is bent at the knee with your heel on the pedal, the seat is too
low.
LECTRICEBIKES.COM | 602.715.0907
20
To adjust seat height:
· Loosen the seat post clamp. The open and closed positions of the seat post
clamp are shown below (open position on left, closed position on right);
· Raise or lower the seat post in the seat tube;
· Check that the seat is straight before and after; and
· Re-tighten the seat post clamp to the recommended torque. See “Tightening
Torque” on page 27.
Adjust Seat Position
WARNING!
Always tighten fasteners to the correct torque to prevent serious injury or
death. Bolts that are too tight can stretch and deform. Bolts that are too
loose can move and fatigue. Either condition can lead to a sudden failure of
the bolt and result in a crash. See “Tightening Torque” on page 27.
LECTRICEBIKES.COM | 602.715.0907
21
Front and back adjustment: Loosen 14mm nuts on both sides of the seat with a 14mm socket or box wrench. Make sure the clamp mechanism is clamping on the straight part of the seat rails and is not touching the curved part of the rails. Ensure that you are using the recommended torque on the clamping fastener(s). See “Tightening Torque” on page 27.
Seat angle adjustment: Most people prefer a horizontal seat; but you may prefer the seat nose angled slightly up or down. Loosen the clamp bolt to allow any serrations on the clamp mechanism to disengage before changing the seat angle, and to fully re-engage the serrations before you tighten the clamp bolt to the recommended “Tightening Torque” on page 27.
LECTRICEBIKES.COM | 602.715.0907
22
Installing and Uninstalling Battery Pack
WARNING!
To prevent serious injury or death: · Only place battery pack on clean
surfaces. Avoid getting dirt, e.g.
sand or soil, in the charging port and contacts. · Do not charge or use
battery pack if it is damaged. Contact
Lectric eBikes to order a replacement.
Your bike comes with a 48V lithium-ion battery. The bike’s battery comes with
a unique set of keys that are used to turn it on/off as well as keep it
unlocked/locked to the frame. The battery has 2 key positions: LOCKED, and
UNLOCKED. The key lock is spring-loaded and will spring back to the LOCKED
position when not manually turned to UNLOCKED.
LECTRICEBIKES.COM | 602.715.0907
23
How to Install the Battery To Insert:
1. Align the battery to the tabs of the battery plate. 2. Slide the battery
into the battery plate terminals to secure the battery into place.
How to Remove the Battery To Remove:
1. Turn the battery key into the UNLOCKED position. 2. Pull the battery
upwards off the battery plate.
LECTRICEBIKES.COM | 602.715.0907
24
Charge Battery Before First Use
Locate charging port on the side of the battery pack. Use this port to charge
when battery pack is installed or not installed.
You should fully charge your battery before your first ride.
Fire and explosion hazards. Never leave your battery pack unattended while
charging to prevent serious injury or death.
See “Battery Pack” on page 42 for additional information.
LECTRICEBIKES.COM | 602.715.0907
25
How to Unfold and Fold the Frame To Unfold:
1. To unfold the bike frame, stand near the frame. Grab the stem and rear end
of the bike. Lift the bike slightly off the ground and swing to the closed
position. 2. Push in the frame latch firmly until it locks into position. Pull
on the latch to confirm that the latch has locked and that the frame cannot
fold.
To Fold:
1. To unlock the bike frame and return it to the folded position, start by
sliding the switch labeled “open” to the right.
2. Pull the latch while still holding the switch to the “open” position. You
may now fold the bike by sliding the front tire between the frame and rear
tire.
For a video tutorial, find the “XP Trike First Ride Video” at lectricebikes.com/first-ride-videos
LECTRICEBIKES.COM | 602.715.0907
26
Tightening Torque Part
Axle Collars Bottom Bracket Brake Caliper Mounting Bolts Brake Lever Clamp
Bolts Chain Tension Bolts Crank Bolts Disc Rotor Mounting Bolts Fender
Mounting Bolts Headlight Mounting Screw Headset Compression Bolt Motor Nut
Pedals Rear End Bolts x6 Seat Rail Binder Spokes
Stem Clamp Bolt Stem Pinch Bolts Stem Riser Torque Arm Bolt Wheel Axle Nuts
Tool
Spec
5mm hex wrench
10 Nm
BBT-22
40 Nm
5mm hex wrench
10 Nm
4mm hex wrench
5 Nm
5mm hex wrench
6 Nm
8mm hex wrench
40 Nm
T-25 Torx
5-8 Nm
4mm hex wrench
5 Nm
5mm hex wrench
10 Nm
5mm hex wrench
~2-4 Nm
17mm wrench
30 Nm
8mm hex wrench
35 Nm
17mm wrench
30 Nm
14mm wrench
20 Nm
spoke wrench 2
Front Tension 180-200 KGF
5mm hex wrench
10-12 Nm
5mm hex wrench
10 Nm
6mm hex wrench
20 Nm
4mm hex wrench
5 Nm
Rear: 8mm wrench Front: 15mm wrench
35 Nm
LECTRICEBIKES.COM | 602.715.0907
27
FEATURES
WARNING!
Never modify your frame or bicycle in any way as this could cause serious
injury or death. Do not sand, drill, file, or remove parts from your bicycle.
Do not install incompatible components or hardware.
Motor
WARNING!
To prevent serious injury or death:
· Do not open the drive unit yourself. The drive unit must only be repaired by
qualified personnel using only original parts. This will ensure that the
safety of the drive unit is maintained. Unauthorized opening of the drive unit
will render warranty claims null and void.
· All components fitted to the drive unit and all other components of your
Lectric eBike PAS system (e.g. chainring, chainring receptacle, pedals) must
only be replaced with identical components or components that have been
specifically approved by Lectric eBikes. This should help protect the motor
from overloading.
· Always remove the battery pack from your Lectric eBike before beginning work
(e.g. inspection, repair, assembly, maintenance, work on the chain, etc.),
moving it with a car or on an airplane, or storing it. Battery pack removal
should prevent unintentional activation of your Lectric eBike.
· Do not make any modifications to your Lectric eBike or attach any other
products that might increase the performance of your Lectric eBike. Doing so
will generally reduce the service life of the system and risks damaging the
drive unit and the bicycle. You also run the risk of losing the guarantee and
warranty claims on the bicycle you have purchased. By handling the system
improperly, you are also endangering your safety and that of other road users,
thus running the risk of high personal liability costs and possibly
LECTRICEBIKES.COM | 602.715.0907
28
even criminal prosecution in the event of accidents that can be attributed to
manipulation of the bicycle. · Under extreme conditions, such as continuously
high loads at low speed when riding up hills or carrying loads, parts of the
motor can reach high temperatures.
Throttle
The right handlebar features a half-twist throttle. To operate: Check that the
Pedal Assist (PAS) level is set above 0, then twist the throttle back slowly
to achieve your desired speed and acceleration.
LECTRICEBIKES.COM | 602.715.0907
29
Hydraulic Disc Brakes
Your Lectric XP Trike is equipped with hydraulic disc brakes.
WARNING!
To prevent serious injury or death: · ALWAYS apply right brake lever (rear
wheels) before and during
use of the front brake. · ALWAYS apply even pressure to both brake levers when
slowing
down or stopping. If only the front brake is applied while slowing or stopping
quickly, you may be ejected over the front handlebars. Before riding, check to
ensure the brake levers do not touch the handlebars when fully applied. If
either lever touches the handlebars, call Lectric eBikes to determine next
steps. You will likely need your brakes bled.
To brake the rear wheels: Pull right brake lever to activate rear brakes. To
brake the front wheel: Pull left brake lever to activate front brake.
Disc brake rotors will become hot during use and will stay hot for a short
period after use. To prevent burns, do not touch the disc rotor right after
use.
Front and Rear Lights
Your Lectric eBike comes with integrated front and rear lights. To turn lights
ON: Hold plus (+) button on the display control pad for about 3 seconds until
the lights turn ON. To turn lights OFF: Hold plus (+) button on the display
control pad for about 3 seconds until the lights turn OFF.
Always turn lights ON for your safety, especially when riding at night or in
low visibility situations.
LECTRICEBIKES.COM | 602.715.0907
30
COCKPIT SYSTEM
Cockpit Instruments
BRAKE LEVERS
(Behind handlebar grips)
LCD DISPLAY CONTROL PAD
LCD D I S PL AY
H A L F -T W I S T THROTTLE
Display Controls
PLUS BUTTON
MINUS BUTTON
POWER BUTTON
LECTRICEBIKES.COM | 602.715.0907
31
Pedal Assist Overview
When does the Pedal Assist activate?
Pedal Assist (PAS) functions only when you are pedaling. If you do not pedal,
the PAS will not activate. The motor output always depends on your pedaling
and the PAS level you have set.
PAS automatically switches off at the maximum speed set for your Lectric eBike
(up to 14 mph). When the speed falls below the maximum set speed, PAS
automatically becomes available again.
You can also use your Lectric eBike as a normal bicycle without assistance at
any time, either by switching the Cockpit System power button OFF, or by
setting PAS to 0. If the battery needs to be charged, PAS will not function.
When the bicycle has not been used for 10 consecutive minutes, the display
will automatically shut down. The PAS and throttle features will no longer
work when the display is OFF.
WARNING!
To prevent serious injury or death:
· Do not allow yourself to be distracted by the display. If you do not
concentrate on the traffic around you, you risk being involved in a crash. If
you want to change any settings other than the PAS level, always stop before
changing the settings or display.
· Set the display brightness such that you can adequately see important
information like speed or warning symbols. Display brightness that is
incorrectly set can result in dangerous situations.
· The electrical components on the bicycle are not waterproof. The electrical
components on the bike have an IP rating of 65.
· Check the display and plug. If damage is detected, do not use the display. A
damaged display or cables or plugs increase the risk of a fire, explosion and
personal injury.
· Do not disassemble the display. There are no user serviceable parts inside
the display. Incorrect reassembly or damage may result in fire or explosion.
LECTRICEBIKES.COM | 602.715.0907
32
Display Functions
3
4
5
1 6
2
7
1 Walk Mode, Cruise Control, and Pedal assist (PAS) Level Indicator
2 Odometer, Trip A, Voltage, Current, Trip Timer (TM) readouts
3 Battery level indicator bar 4 Maximum and Average Speed 5 Speedometer in MPH
or KM/H 6 Light On/Off Indicator 7 Mile and kilometer indicators
LECTRICEBIKES.COM | 602.715.0907
33
Battery Level Indicator Bar
The “Energy Bar” near the top of the display is your battery indicator and
shows the estimated charge level remaining in your battery pack.
As the battery charge depletes, the remaining marks will display the
approximate remaining charge in the battery pack.
The battery display will flash when there is no charge remaining.
OPERATING COCKPIT SYSTEM
Turn the bicycle ON/OFF
Press and hold button
Increase PAS Level Decrease PAS Level
Press plus (+) button Press minus (-) button
Turn lights ON/OFF
Toggle Odometer, Trip A, Voltage, Current, Trip Timer (TM)
Press and hold the plus (+) button for about 3 seconds or until lights turn
ON; repeat to turn OFF
Press button
Max Speed and Average Speed
Press and hold the plus (+) button and button simultaneously to toggle between the speedometer, max speed and average speed
NOTE: The trip meter, as well as maximum and average speed will reset when the bicycle is powered OFF.
LECTRICEBIKES.COM | 602.715.0907
34
Range Estimates
The range the bicycle can go on a single battery charge can vary significantly
between riders, terrain, wind conditions, user input, and additional cargo
weight.
Tips to Increase Range
To get the maximum range out of each battery charge, there are some simple
things you can do: · Ride at a lower PAS level · Use lower PAS levels and
pedal when climbing hills · Pedal when starting from a standstill
All tests were performed with: · Flat ground · Few bumps · Little to no wind · Top speed at 14 mph · Lectric 20×2.6 in. ~36 PSI
· Few starts and stops · No additional cargo · Temperature ~75°F · Rider weight ~180 lbs. · 14 Ah Battery
Range Estimates Under Test Conditions Throttle and PAS Level
Up to 20 miles
· Pure throttle use · Mostly PAS level 5
Up to 35 miles
· Little use of throttle · Mostly PAS level 3
Up to 60 miles
· Very little use of throttle · Mostly PAS levels 1-2
LECTRICEBIKES.COM | 602.715.0907
35
Settings Menu
WARNING!
Do not tamper with your bicycle. Tampering is defined as removing or replacing
any original equipment, or modifying your bicycle in any way that may change
its design and/or operation. Such changes may seriously impair the handling,
stability, and other aspects of the bicycle, making it unsafe to ride.
Tampering can void the warranty and render your bicycle noncompliant with the
applicable laws and regulations. Lectric eBikes is not responsible for any
direct, incidental, or consequential damages, including, without limitation,
damages for personal injury, property damage, or economic losses due to
tampering.
To change display settings, hold the plus (+) and the minus (-) buttons
simultaneously to enter into the Settings Menu. Press the
button to toggle between each numbered setting. To adjust the value of each
setting, click the plus (+) and the minus (-) buttons as needed. There are 22
settings (P01-P22). You should only change the settings listed below.
WARNING!
To prevent serious injury or death, DO NOT change settings excluded from the
table. Changing setting not listed in the following table may cause your bike
to stop working properly. If you need the default setting values of setting
not listed, contact Lectric eBikes. DO NOT ride your bicycle until the default
settings have been restored.
LECTRICEBIKES.COM | 602.715.0907
36
Setting Function Default
Explanation
P01 Brightness
P02
Distance
Units
2
Backlight display brightness. The darkest
level is 1 and the brightest level is 3.
1
0: KM; 1: MILE.
P04
Sleep
10 LCD Display sleep timer. The default setting will turn the display OFF after it has not been used for 10 minutes.
P06
Tire Size
19.7 Used to compute speed and
distance traveled.
P09 Throttle Zero 0 Start
0: Throttle active from standstill. 1: Throttle active only when already moving.
P10 Mode Toggle 2
0: PAS Active, Throttle Inactive 1: PAS Inactive, Throttle Active 2: Both PAS and Throttle Active
P11
PAS
Sensitivity
1 1: Low 2: Medium 3: High
When set to higher numbers, it will take more crank rotations for the motor to
turn ON. Lower numbers will take fewer crank rotations to turn the motor ON.
P12 PAS Strength 1 1-5
When set to higher numbers, the motor will come on stronger. Lower numbers
will be more gentle.
P16
Odometer
NA Hold the plus (+) button for 5 seconds to
Reset
reset odometer.
LECTRICEBIKES.COM | 602.715.0907
37
Setting Function Default
Explanation
P21
Walk Mode
Toggle
P22
Assistance
Level
1
0: Walk Mode disabled
1: Walk Mode enabled
0
0: PAS 1-2: 5 mph max speed
PAS 3-5: 12 mph max speed
1: PAS 1-5: 14 mph max speed
Changing Top Speed
Your Lectric eBike ships with a maximum speed set at 12 miles per hour (mph).
This means it is a Class 2 electric bicycle in states that recognize three
classes of eBikes. In most states that only recognize eBikes generally, the 20
mph top speed is legal for use on public roads.
eBike Classes in the U.S.A.
Class
Pedal Assist Speed Limit
1
20 mph
2
20 mph
3
28 mph
Throttle Speed Limit
Throttle not allowed
20 mph
20 mph
WARNING!
Ride within your limits to prevent serious injury or death. Riding at higher
speeds poses an increased safety risk. ALWAYS wear a helmet and obey the rules
of the road.
LECTRICEBIKES.COM | 602.715.0907
38
To increase maximum speed: 1. Press and hold the plus (+) and minus (-)
buttons on the control
pad simultaneously until the screen says “P1”. 2. Press the button on the
control pad to cycle through the settings. 3. Go to setting “P22” and change
this value from 0 to 1.
NOTE: Refer to “P22” on page 38 for the description of the P22 setting.
Please note: The maximum achievable top speed will vary by tire inflation
pressure, road conditions, total payload, battery charge level and other
factors.
4. Press and hold the plus (+) and the minus (-) buttons on the control pad
to exit Settings Menu.
5. Power bicycle OFF by holding the button to save the settings.
Parking Brake
Your bike is equipped with a front and rear parking brake. Activate by
squeezing the brake lever in all the way and then pressing your parking latch
into place. Squeeze the brake lever to release.
Cruise Control
Cruise control on your Lectric XP Trike works similarly to cruise control on a
car. The bike will try to maintain a speed based on the position of the
throttle when cruise control was activated. For example, if the throttle is
twisted all the way from its resting position (to a position that would
normally maintain 12 mph) and the minus button is held, cruise control will be
activated and set at 12 mph. Even
LECTRICEBIKES.COM | 602.715.0907
39
if the bike is currently going slower than 12 mph, the bike will try to
accelerate and maintain that speed because it was set based on that throttle
position.
To activate cruise control:
Hold the minus (-) button while twisting the throttle.
To cruise at low speeds, only slightly twist the throttle and hold the minus
(-) button.
NOTE: When Cruise Control is active, “Cruise” will appear on the display.
To deactivate cruise control:
Pull either brake lever to disengage Cruise Control.
PREPARING TO RIDE
WARNING!
To prevent serious injury or death, go through the “Pre-Ride Safety Checklist”
on page 8 of your Owner’s Manual before each ride.
YOUR FIRST RIDE
The acceleration of your Lectric eBike may be faster than anticipated, and may
feel unusual at first. Before your first ride, you should use the lowest level
of pedal assist (PAS 1) and become familiar with the operation of your Lectric
eBike by practicing starting, stopping, cornering, and navigating obstacles in
a safe environment away from other bicycles, pedestrians, and/or vehicles. You
should also pay particular attention to terrain conditions as you may approach
obstacles faster than expected.
The Pedal Assist may be activated as soon as you step onto the pedals and the
bicycle is in motion. ALWAYS be seated on the bicycle and engage at least one
brake before starting to pedal. DO NOT place one foot on a pedal then throw
your other leg over the bicycle or your eBike could accelerate unexpectedly.
Refer to “Pre-Ride Safety Checklist” on page 8 before you go on your first
ride.
LECTRICEBIKES.COM | 602.715.0907
40
How to Start Your Ride
1. Insert key and turn counterclockwise to the LOCK position.
2. Hold down the button located on the left handlebar until the display comes
on.
NOTE: After 48 hours of inactivity, the battery will go into sleep mode. In
this scenario, it is required to click the button on top of the battery before
powering the bike on.
3. Select a Pedal Assist (PAS) level using the plus (+) and minus (-)
buttons. PAS 0 provides no motor assist. PAS 1 is the lowest level of assist
and PAS 5 is the highest level of assist.
WARNING!
To prevent serious injury or death: · Exercise extreme caution when using the
twist throttle. When
at a complete stop with the bicycle turned ON, be careful not to twist the
throttle or the bicycle could accelerate and cause you to crash. · Do not
engage Walk Mode when riding or sitting on your Lectric eBike. Holding the
minus (-) button will engage the motor up to a walking speed.
How to End Your Ride:
When the bicycle is at a complete stop, press and hold the button to turn the
display OFF. This ensures the motor will not activate until the display is
turned ON again and you are ready to ride.
LECTRICEBIKES.COM | 602.715.0907
41
BATTERY PACK
The term battery pack refers to all original Lectric eBikes battery packs.
The safety of both our customers and our products is important to us. Our
eBike batteries are lithium-ion batteries, which have been developed and
manufactured in accordance with the latest technology. We comply with or
exceed the requirements of all relevant safety standards. When charged, these
lithium-ion batteries contain a high level of energy. If a fault occurs (which
may not be detectable from the outside), in very rare cases and under
unfavorable conditions, lithium-ion batteries can catch fire.
Take care when using and charging your battery. Failure to follow the
guidelines below could result in damage to property and/or serious injury.
Contact Lectric eBikes immediately if you have any questions regarding battery
safety.
Your Lectric eBike battery must not be opened, even for repairs. There is a
risk your eBike battery could catch fire, e.g. due to a short circuit. This
risk increases if an eBike battery which has already been opened is reused at
a later point in time. Do not attempt to repair an eBike battery in the event
of a fault. Have it replaced with an original Lectric eBike battery pack.
The battery is protected against deep discharge, overloading, overheating, and
short-circuiting by Electronic Cell Protection (ECP). In the event of a fault,
a protective circuit switches the battery pack off automatically.
Battery Safety
WARNING!
Only use original Lectric eBike batteries for your eBike. Using other
batteries can lead to injuries and pose a fire hazard. Lectric eBikes accepts
no liability or warranty claims if other batteries are used. To prevent
serious injury or death: · Do not leave your battery unattended while
charging. · When removing the battery, unplug the rubber stopper on the
charging point. · Always charge your battery in temperatures between 50°F
77°F
(10°C 25°C).
LECTRICEBIKES.COM | 602.715.0907
42
· For an optimum service life, operate your Lectric eBike battery at
temperatures between 32º F -104º F (0°C-40°C).
· Battery leakage may occur under extreme usage or temperature conditions.
Avoid contact with skin and eyes. Battery liquid is caustic and could cause
chemical burns. If battery liquid comes in contact with skin, wash quickly
with soap and water. If the liquid contacts your eyes, immediately flush eyes
with water for a minimum of 15 minutes and seek medical attention.
· Always remove the battery from the bicycle when not in use and store in a
secure location to prevent unauthorized use.
· Do not submerge the battery in liquid of any kind.
· Do not touch the terminals on your battery.
· Turn display OFF when not in use and before removing battery pack.
· The battery pack should not be excessively difficult to insert or to remove.
Do not force the battery pack in or out of the bike frame.
· Battery charging times may increase with battery age and usage.
· Only grab the charger by the plug and not the cable when plugging and
unplugging from the wall.
· If the battery has trouble charging, stop charging and contact Lectric
eBikes immediately.
· Do not puncture or crush the battery pack. Do not impact the battery pack or
modify it in any way. Do not use the battery pack if it shows visible damage.
The aforementioned can increase danger of fire or explosion.
· Protect the battery pack from heat (e.g., temperature >140ºF), fire, and
immersion in water. The aforementioned can increase danger of fire or
explosion.
· Always remove the battery pack before beginning work (e.g. inspection,
repair, assembly, maintenance, work on the chain, etc.) on your Lectric eBike,
moving it via car or airplane, or storing it. Unintentional activation of the
Lectric eBike poses a risk of injury.
· Do not open the battery. There is a risk of short circuiting. Opening the
battery voids any and all warranty claims.
· When the battery is not in use, keep it away from paper clips, coins, keys,
nails, screws, or other small metal objects that could make a connection from
one terminal to another. A short circuit between the battery terminals may
cause burns or a fire. Short circuit damage which occurs in this instance
voids any and all warranty claims against Lectric eBikes.
· Avoid mechanical loads and exposure to high temperatures. These
LECTRICEBIKES.COM | 602.715.0907
43
can damage the battery cells and cause the flammable contents to leak out.
· Do not place the charger or the battery near flammable materials. Ensure the
battery is completely dry and placed on a fireproof surface before charging.
There is a risk of fire due to the heat generated during charging.
· Your Lectric eBike battery must not be left unattended while charging.
· If used incorrectly, liquid may leak from the battery. Contact with this
liquid should be avoided. If contact occurs, rinse off with water. If the
liquid comes into contact with your eyes, seek additional medical attention.
Liquid leaking from the battery may cause irritation or scalding.
· Batteries must not be subjected to mechanical shock. If battery is dropped
or struck with another object, the battery may be damaged.
· The battery may give off fumes if it becomes damaged or is used incorrectly.
Ensure the area is well ventilated and seek medical attention should you
experience any adverse effects. The fumes may irritate the respiratory system.
· Only charge the battery using original Lectric eBikes chargers. When using
chargers that are not made by Lectric eBikes, the risk of fire cannot be
excluded.
· Use the battery only in conjunction with your Lectric eBike. This is the
only way in which you can protect the battery against dangerous overload.
· Use only original Lectric eBikes battery packs that the manufacturer has
approved for your eBike. Using other batteries can lead to injuries and pose a
fire hazard. Lectric eBikes accepts no liability or warranty claims if other
batteries are used.
· Keep the battery away from children.
· Always turn display OFF before removing the battery pack.
· Always remove the key from the battery pack after each use. This prevents
both unauthorized use of the powered features of your Lectric eBike and
removal of the battery by unauthorized persons when your Lectric eBike is not
in use. Failure to secure your bicycle from unauthorized use can result in
death or serious injury to others.
LECTRICEBIKES.COM | 602.715.0907
44
Charging
Locate the charge port on the side of the battery. You can charge the battery
from this port while the battery is in or out of the bicycle.
WARNING!
To prevent serious injury or death:
· Do not leave your battery unattended while charging.
· Do not connect the battery pack to the charger until it has reached an
allowable charging temperature.
· Do not charge the battery with chargers other than the charger provided by
Lectric eBikes.
· Only charge the battery indoors and in dry spaces which are not excessively
hot or cold (within 10ºF of room temperature).
· Ensure there are no flammable items, dirt or debris nearby when using the
charger.
· The charger will automatically stop charging once the battery reaches its
full capacity.
· The light on the charger will be red when the battery is charging, and will
turn green when charging has finished.
· Avoid leaving the charger plugged in when the battery is fully charged.
· Do not charge the battery if you notice the battery is damaged, excessively
hot, leaking, smells, or is discolored.
· Charging the battery should take approximately 4-6 hours if the battery is
mostly empty.
· Store the battery indoors in a dry space, away from heat or flame sources
and out of direct sunlight.
· The charger may get hot (>165ºF) when charging. Use caution and avoid
touching the body of the charger.
· To reduce risk of injury, charge only batteries of your Lectric eBike. Other
types of batteries may burst, causing personal injury and damage.
· Only charge Lectric eBikes approved lithium-ion battery packs. The battery
pack voltage must match the battery pack charging voltage of the charger.
Otherwise, there is risk of fire and explosion.
LECTRICEBIKES.COM | 602.715.0907
45
· Do not expose the charger to rain or wet conditions. If water enters a
charger, there is a risk of electric shock.
· Only use the original Lectric eBikes battery charger supplied with your
eBike or one approved for your eBike by the manufacturer and purchased from a
trusted source. Bypassing the battery charger or the use of a non-approved or
counterfeit battery charger can lead to death or serious injury.
· Keep battery charger clean. Contamination can lead to the risk of an
electric shock. Clean only with the use of a damp cloth (mild soap/water).
· Always check the charger, cable, and plug before use. Stop using the charger
if you discover any damage. Do not open the charger. Damaged chargers, cables,
and plugs increase the risk of electric shock.
· Do not operate the charger on an easily ignited surface (e.g. paper,
textiles, etc.) or in a flammable environment. There is a risk of fire due to
the charger heating up during operation.
· Take care if you touch the charger while it is charging. The charger can get
very hot, especially when the ambient temperature is high.
· The battery may give off fumes if it becomes damaged or is used incorrectly.
Ensure the area is well ventilated and seek medical attention should you
experience any adverse effects. These fumes may irritate the respiratory
tract.
· Batteries must not be subjected to mechanical shock. There is a risk of
damage to the battery pack.
· Keep the battery charger away from children. This will ensure that children
do not play with the charger.
· Persons who are not capable of safely operating the charger because of their
physical, sensory, or mental limitations, or because of their lack of
experience or knowledge, may only use this charger under supervision or after
having been instructed by a responsible person. Otherwise, there is a risk of
operating errors and injuries.
· Note the household voltage! The voltage of the power supply must correspond
to the specifications given on the battery charger nameplate.
· Damage to your ebike’s electrical system caused in any manner, including
water intrusion, can lead to battery failure, electrical
LECTRICEBIKES.COM | 602.715.0907
46
system malfunction, or electrical fire and consequent property damage, injury,
or death. Follow all recommendations to minimize chance of water damage. If
you have any questions, contact Lectric eBikes. · Keep battery charger clean.
Contamination can lead to the risk of an electric shock. Clean only with the
use of a damp cloth (mild soap/water) when the charger is unplugged from both
the wall and the bike. · Keep the rubber plug inserted into the battery any
time the battery is in the bike to prevent water ingress.
CAUTION
To reduce the risk of fire, connect only to a circuit provided with 10 amperes
maximum branch circuit overcurrent protection in accordance with the National
Electrical Code, ANSI/NFPA 70. Never use extension cords with your Lectric
eBikes charger provided with the purchase of your ebike, after sales service,
or warranty charging devices.
WARNING!
Using a damaged battery or charger can create additional bike damage or a fire
hazard. Stop using your battery and charger and contact Lectric eBikes
immediately if any of the following occur: (1) Your charger’s flexible power
cord or output cable or any of the electrical cables on your bike is frayed,
has broken insulation, or any other signs of damage, (2) Your battery or
charger is physically damaged, non-functional, or performing abnormally, (3)
Your battery or charger experienced a significant impact from a fall or crash,
with or without obvious signs of damage, or (4) Your charger becomes too hot
to touch (it’s designed to get warm with normal use), gives off an odor, or
shows other signs of overheating. Store any damaged battery or charger in a
safe location and, as soon as possible, recycle or otherwise dispose of it
according to local rules. Contact Lectric eBikes if you have any questions or
to purchase a compatible replacement battery or charger.
LECTRICEBIKES.COM | 602.715.0907
47
Battery Charging Information
· Check the charger, charger cables, and battery for damage before beginning
each charge.
· Always charge in a safe area that is cool, dry, indoors, away from direct
sunlight, dirt, or debris, in a clear area away from potential to trip on the
charging cords, or for damage to occur to the bike, battery, or charging
equipment while parked and/or charging. Always charge your battery in
temperatures between 50 °F 77 °F (10 °C 25 °C).
· The battery can be charged on or off the bike. To remove the battery see
instructions “Installing and Uninstalling Battery Pack” on page 23.
· The battery should be recharged after each use, so it is ready to go the
full range per charge next ride. There is no memory effect, so charging the
battery after short rides will not cause damage.
· Charging the battery normally takes 3-7 hours. In rare cases, it may take
longer to allow the battery management system to balance the battery,
particularly when the bike is new or after long periods of storage.
· The charge indicator light will show red while the battery charges. When
charging is complete, the charging indicator light will turn green. Ensure the
lights face upward when charging.
· Remove the charger from the battery within one hour of the green light
indicating a complete charge. The charger is designed to automatically stop
charging when the battery is full, but unnecessary wear of the charging
components could occur if the charger is left attached to the battery and a
power source for longer than 12 hours. Detach the charger as soon as possible
once the green light indicates a complete charge to avoid unnecessary wear of
charging components.
· Never charge a battery for more than 12 hours at a time.
· Do not leave a charging battery unattended.
Charger Manufacturer
· Charger made by: Wuxi Dpower Electric Co., Ltd.
· Charger Model: DPLC110V55
LECTRICEBIKES.COM | 602.715.0907
48
To Charge:
1. Plug the cable from the charger into the port on the side of the battery
pack.
2. Plug the charger power cable into an electrical mains wall socket.
Note: Use only the supplied input connection: standard AC power cord when
connecting to the household electrical supply.
Note: The charging process is only possible when the temperature of your
Lectric eBike battery is within the permitted charging temperature range.
After charging is complete and the light on the charger is green, disconnect
the cable from the battery port and power cord from wall socket. If you have
charged the battery in the bicycle frame, carefully insert the rubber plug
after charging, so that no dirt or water can enter the battery port.
LECTRICEBIKES.COM | 602.715.0907
49
Moving and Storage Instructions
Charging Battery Pack Before and During Storage
When the battery pack will not be used for weeks or months, remove it from the
eBike and store the battery pack at about 60 % charge as indicated by the
Energy Bar on the display. At about 60% charge, the battery will degrade less,
compared to higher charge levels. Every 2-3 months check the battery charge
level and recharge to 60%, if necessary. Note: If the battery is stored with
no charge for an extended period of time, it may be damaged despite the low
self-discharge and may reduce the battery capacity. For optimum service life
for your battery pack, charge the battery pack to 100% a few hours before you
plan to ride. For example, if you ride the bicycle and the charge level falls
to 50% but you plan to use the bicycle again in a few days, wait until the day
before you plan to use it again to charge it to 100%.
DO NOT charge battery unattended or leave battery connected to charger
overnight.
Leaving the battery permanently connected to the charger is not recommended.
As the battery pack ages, capacity will diminish and the battery pack will
eventually need to be replaced. A significantly reduced operating period after
charging indicates that the battery pack is worn out and must be replaced. You
may replace it yourself by purchasing a replacement battery pack from Lectric
eBikes.
LECTRICEBIKES.COM | 602.715.0907
50
Storage Conditions
If possible, store the battery pack in a dry, well-ventilated place. Protect
it from moisture and water. Always store your Lectric eBike battery pack in a
location that: · Is in a room with a smoke alarm; · Is away from combustible
or easily flammable objects; and · Is away from heat sources. For an optimum
service life, operate your Lectric eBike battery at temperatures between 32º F
-104º F (0°C-40°C). Make sure the maximum operating temperature is not
exceeded. Do not leave the battery in your car during the summer, for example,
and store it away from direct sunlight. NOTE: Leaving the battery installed on
the bicycle for long-term storage is not recommended.
WARNING!
Failure to follow Battery Charging & Storage Best Practices could result in
unnecessary wear to the charging components, battery, and or charger, and
could lead to an underperforming or non-functional battery and replacement
will not be covered under warranty.
LECTRICEBIKES.COM | 602.715.0907
51
Troubleshooting the Battery
If you have any questions at all regarding the basic troubleshooting below,
reach out to Lectric eBikes customer support by email at
[email protected], or call
602-715-0907.
Issue
Most Common Solutions
Charging indicator lights do not illuminate.
1. Check that the cord is connected to the charger.
2. Check power availability at the main plug location.
3. If the battery does not charge, unplug and contact Lectric eBikes. Do not
attempt to repair cord or charger.
Charging indicator light is always red.
Battery pack may be defective. Contact Lectric eBikes customer support for assistance.
Battery Recycling
When your battery is no longer usable, dispose of your battery according to
state and federal regulations. State regulations regarding battery disposal
vary so it is important you find out and follow the rules in your state.
Lithium-ion batteries cannot be put in with standard garbage bins.
LECTRICEBIKES.COM | 602.715.0907
52
MOVING AND STORING YOUR LECTRIC EBIKE
Please observe storage temperatures for your Lectric eBike. Protect the Drive
Unit, Cockpit System, and Battery Pack against extreme temperatures (e.g. from
intense sunlight without adequate ventilation). Extreme temperatures can cause
the components (especially the battery) to be damaged.
WARNING!
To prevent serious injury or death: · Always remove the battery pack before
moving your Lectric
eBike on a bicycle rack mounted on your vehicle. · Always use a bicycle rack
that is compatible with your Lectric
eBike. Check your bicycle rack manual to be sure your rack has sufficient
capacity. Overloading a bicycle rack could cause the rack to fail and your
eBike to be damaged. · Never attempt to use a roof-mounted bicycle rack. ONLY
use hitch-mounted racks. · Always use proper lifting techniques when lifting
your Lectric eBike. Electric bicycles are generally heavier than bicycles.
DISPOSAL OF YOUR LECTRIC EBIKE
When your Lectric eBike is no longer usable, dispose of your eBike according
to state and federal regulations. The motor, display, battery, speed sensor,
accessories, and packaging should be disposed of in accordance with these
regulations. State regulations regarding electronics disposal vary, so it is
important you abide to the rules in your state. NOTE: Do not dispose of eBikes
and their components with household waste.
LECTRICEBIKES.COM | 602.715.0907
53
TROUBLESHOOTING
If you have any questions at all regarding the basic troubleshooting below,
reach out to Lectric eBikes customer support by email at
[email protected], or call
602-715-0907.
Issue
Most Common Solutions
Bicycle will not turn ON.
1. Charge the battery until the light on the charger turns from red to green.
This may take up to 8 hours.
2. Insert key in the battery and turn counterclockwise to the LOCK position.
Then press and hold the button to turn ON.
3. Follow the cable coming from the display down to the quick plug. You may
need to unravel some of the plastic wrapping to access it. With a quick pull
(do not twist), unplug the quick plug, inspect both sides of the plug, and
reconnect by lining up the arrows on both ends. After checking the quick plug,
press and hold the button on the display control pad to turn on.
Pedal assist or throttle do not work.
1. Check that the PAS level is set between 1-5.
2. To test if PAS is working, do not operate throttle.
3. To test if the throttle is working, do not pedal.
4. Check all quick plugs.
LECTRICEBIKES.COM | 602.715.0907
54
Error Codes
The components of your Lectric eBike are continuously monitored automatically.
If a fault is detected, the corresponding error code will appear on the
display.
Error Code E003
Meaning PAS Sensor Fault
E006 E007
Battery Undervoltage Motor Fault
E008
Throttle Fault
E009
Controller Fault
E010
Display Communication Reception Failure
Most Common Solution Check PAS quick plug Fully charge battery Check motor quick plug Check throttle quick plug Check controller connections Check display quick plug
E011 Hot
Display Communication Send Failure
High Temperature Fault
Check display quick plug
Stop use and allow bike to cool
LECTRICEBIKES.COM | 602.715.0907
55
USER MAINTENANCE INSTRUCTIONS
You should have your bicycle maintained at regular service intervals at your
local bicycle shop.
WARNING!
To prevent serious injury or death: · NEVER open any of the components,
including the battery,
display, motor, or PAS sensor. Service should only be performed by a bicycle
repair shop. · Always remove the battery pack before performing any bicycle
inspection, maintenance, or repair. · If you suspect that something is loose,
do not ride your bicycle. All nuts, bolts, and screws require the proper
tightening force. Too little force and the fastener may not hold securely. Too
much force and the fastener can strip threads, stretch, deform, or break.
Either way, incorrect tightening force can result in component failure, which
can cause you to lose control and crash. Take your bicycle to a bicycle repair
shop for service. · Do not paint any components of your Lectric eBike as they
may cause premature failure of the component. · Do not submerge your Lectric
eBike or its components in water or use a pressure washer to clean.
Caring for Your eBike
Always observe the operating and storage temperatures of your Lectric eBike
and its components. Protect motor, display, and battery pack against extreme
temperatures (e.g. from intense sunlight without adequate ventilation).
Extreme temperatures can damage components (especially the battery pack).
Please have your Lectric eBike serviced at least once a year.
LECTRICEBIKES.COM | 602.715.0907
56
Tune-Ups
100 Mile Tune-Up
After 100 miles, or 5 full battery charge cycles, have the following services
performed at a bicycle shop: · Brake cables may need to be adjusted and
tensioned properly. · All hardware should be adjusted to the specified
“Tightening
Torque” on page 27. If any hardware is damaged, it may need to be replaced by
a bicycle mechanic.
Monthly (or about every 250-500 miles)
· Inflate tires to pressure within recommended range printed on tire
sidewalls.
· Lubricate chain. · Check that all hardware is tightened to the torque
specifications
listed in the “Tightening Torque” on page 27 section of this manual. · Check
your brake pads for signs of wear. Replace if necessary. · Clean the bicycle
with low residue cleaner and dry completely. Lubricate after cleaning where
necessary. · Check spoke tension and adjust if necessary. See “Tightening
Torque” on page 27.
Quarterly (or about every 750-1500 miles)
· Check all items on the monthly service list above. · Check tire tread for
excessive wear. Replace if necessary. · Check electrical connectors and cable
housings are secured away
from moving parts and are free from damage. Replace if necessary.
LECTRICEBIKES.COM | 602.715.0907
57
WARNING!
Do not tamper with your bicycle. Tampering is defined as removing or replacing
any original equipment or modifying your bicycle in any way that may change
its design and/or operation. Such changes may seriously impair the handling,
stability, and other aspects of the bicycle, making it unsafe to ride.
Tampering can void your warranty and render your bicycle noncompliant with the
applicable laws and regulations. Lectric eBikes is not responsible for any
direct, incidental, or consequential damages. This includes, without
limitation, damages for personal injury, property damage or economic losses
due to tampering. To ensure safety, quality, and reliability, use only
original parts or Lectric eBikes authorized replacements for repair and
replacement.
Cleaning
Do not submerge your Lectric eBike or its components in water, or use a
pressure washer to clean.
Clean your Lectric eBike carefully with a soft, damp cloth (using only mild
soap and water). Rinse with water. The electrical components on your Lectric
eBike are IP 65 rated.
LECTRICEBIKES.COM | 602.715.0907
58
LEGAL
Warranty
LECTRIC EBIKES WARRANTS TO THE ORIGINAL REGISTERED PURCHASER THAT LECTRIC
eBIKES SHALL BE FREE FROM ALL DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD
OF ONE YEAR FROM THE DATE OF DELIVERY.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES: THE ORIGINAL REGISTERED
PURCHASER OF THIS BIKE, SUBSEQUENT OWNERS AND ALL OTHER INTENDED AND
UNINTENDED USERS OF THIS BIKE, SHALL NOT BE ENTITLED TO RECOVER FROM LECTRIC
eBIKES ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. THERE IS NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The warranty is non-
transferable and only applies to the original owner. This warranty gives you
specific rights and purchasers may also have other rights, which may vary from
state to state. Damage caused by failing to follow instructions in the manual,
acts of God, accident, misuse, neglect, abuse, commercial use, alterations,
modification, improper assembly, installation of parts or accessories not
originally intended or compatible with the Lectric eBike as sold, operator
error, water damage, extreme riding, stunt riding, or improper follow-up
maintenance is not covered under this warranty. Warranty parts will only be
shipped within the continental United States and Canada.
Parts covered by the warranty: frame, forks, stem, handlebars, headset, seat
post, saddle, brakes (excluding brake pads), lights, bottom bracket, crank
set, pedals, rims, wheel hub, freewheel, cassette, derailleur, shifter, motor,
throttle, controller, wiring harness, display (excluding damage due to water),
kickstand, reflectors, and hardware. The battery warranty does not include
damage from power surges, use of 3rd party charger, improper maintenance or
other such misuse, normal wear, or water damage (including rust).
Accessories sold on lectricebikes.com are not covered under warranty.
Stolen bikes are not covered under warranty.
Necessary precautions must be taken to ensure the bike and battery are not
exposed to severe weather conditions. Exposure to very wet,
LECTRICEBIKES.COM | 602.715.0907
59
hot, or cold conditions may void the warranty.
Lectric eBikes will replace any parts deemed to have been damaged during
shipping. Shipping damage must be reported to Lectric eBikes within 14 days of
shipment arrival. This applies to all products, including bikes and
accessories.
You will NOT be refunded as compensation for your time or efforts replacing
damaged parts.
Replacement parts will not be sent until photographic evidence has been
provided to Lectric eBikes. Lectric eBikes may request additional
documentation (such as video) to assist with accurately diagnosing the problem
and processing the warranty claim.
Most warranty parts are fulfilled 1-10 business days after the request is put
into our system by a customer service representative. Warranty parts are sent
using USPS First Class, FedEx Express, or FedEx Ground, depending on the size
of the part. Warranty parts will not be expedited.
Items including the chain, tires, wheels, rims, tubes, battery handle, brake
rotors, brake pads, cables and housings, grips, and spokes are considered wear
items. These items wear down with normal use and are not covered under
warranty. You are responsible for replacing and maintaining these wear items.
Any unauthorized alterations or repairs are not covered and may void this
warranty.
For warranty services, please contact Lectric eBikes’ online support by email
at [email protected]. Bikes or parts returned without proper
documentation may result in delayed service or denied warranty coverage.
Warranty return shipping costs along with duties and taxes are the
responsibility of the claimant. All unauthorized returns will be refused.
Note that your insurance policies may not provide coverage for accidents
involving Lectric eBikes. To determine if coverage is provided, you should
contact your insurance company or agent. Damage as a result of an accident is
not covered under this warranty, and Lectric eBikes is not responsible for
repair or replacement of damaged bikes or parts.
LECTRICEBIKES.COM | 602.715.0907
60
Lectric eBikes reserves the right to change its warranty at any time and
without notice. Any action, lawsuit or other proceeding, under this warranty
or otherwise related to the bike must be commenced within ninety (90) days
after expiration of the one-year warranty period.
THIS WARRANTY GIVES THE ORIGINAL REGISTERED PURCHASER SPECIFIC LEGAL RIGHTS
AND YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Bike Performance Disclaimer
The bikes listed range and top speed are estimates (not guarantees) of
expected performance. Performance will vary with rider weight, cargo weight,
rider/cargo shape (both contribute to drag), terrain, tire pressure, brake
adjustment, throttle vs PAS usage, pedal power, battery charge level, ambient
temperature, and wind conditions. Under certain conditions it is possible to
get ranges and top speeds that are different from the listed estimates.
Liability Disclaimer
Riding any kind of bicycle comes with inherent risks and dangers that cannot
be predicted or avoided. These dangers could result in a serious accident,
injury, or death of the rider. It is the sole responsibility of the rider to
become properly educated and prepared to ride safely. Once in possession of
the bike, Lectric eBikes strongly encourages and recommends that all customers
have a certified and reputable bicycle mechanic complete a full inspection of
each component on the bicycle to ensure it is safe for operation. Lectric
eBikes makes no claims or guarantees that the brakes, battery, frame, motor,
motor controller, display, electrical cables, electrical cable housings,
fasteners, grips, fork, stem, shifters, headset, seat post, seat post clamp,
handlebar stem clamp, saddle, wheel hubs, handlebars, spokes, rims, tires,
tubes, derailleur, freewheel, cassette, throttle, kickstand, lights,
reflectors, hardware, bottom bracket, or any other part or accessory, will be
properly secured and adjusted
LECTRICEBIKES.COM | 602.715.0907
61
upon arrival. Before every ride, fully inspect your bicycle to ensure
everything is secured and adjusted properly.
Under no circumstances is Lectric eBikes responsible for any damage resulting
from damaged, defective, or improperly secured parts. This includes, but is
not limited to, damage to personal property, personal injury, or death.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
LECTRICEBIKES.COM | 602.715.0907
62
This equipment complies with radio frequency exposure limits set forth by the
FCC for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 5
mm between the device and the user or bystanders.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
LECTRICEBIKES.COM | 602.715.0907
63
WARNING – When using this product, basic precautions should always be followed, including the following:
A) Read all the instructions before using the product.
B) To reduce the risk of injury, close supervision is necessary when the product is used near children.
C) Do not put fingers or hands into the product.
D) Do not use this product if the flexible power cord or output cable is frayed, has broke insulation, or any other signs of damage.
E) For and off board charging system provided with a field wiring terminal or leads, the installation instructions shall state that the installation is intended to use copper wires only.
F) For and off board charging system, when a pressure terminal connector, or the fastening hardware, are not provided on the unit as shipped. The instruction manual shall indicate which pressure terminal or component terminal assemblies are for use with the unit.
G) With reference to (f), the terminal assembly packages and the instruction manual shall include information identifying the wire size and the manufacturer’s name, trade name, or other descriptive marking by which the organization responsible for the product is identified.
H) When a pressure terminal connector provided on an off board charging system, for a field installed conductor requires the use of other than an ordinary tool for securing the conductor, identification of the tool for securing the conductor, identification of the tool and any required instructions for using the tool shall be included in the installation instructions.
I) The instruction manual for a unit where the abnormal test is
terminated by operation of the intended branch circuit over current
protective device, shall include the word “CAUTION” and the following
or equivalent: “To reduce the risk of fire, connect only to a circuit
provided with
amperes maximum brand circuit overcurrent
protection in accordance with the National Electrical Code, ANSI/
NFPA 70” The blank space is to be filled in with the applicable ampere
rating of branch circuit overcurrent protection.
LECTRICEBIKES.COM | 602.715.0907
64
AVERTISSEMENT- Lors de l’utilisation de ce produit, il convient toujours de
respecter des précautions élémentaires, notamment les suivantes:
A) Lire toutes les directives avant d’utiliser le produit.
B) Pour limiter les risques de blessure, exercer une surveillance étroite si
le produit est utilisé à proximité d’enfants.
C) Ne pas introduire les doigts ou les mains dans le produit.
D) Ne pas utiliser ce produit si le cordon d’alimentation souple ou les cábles
de sortie sont effilochés, si l’isolant est abîmé ou s’il y a d’autres signes
de dommages.
E) Lorsqu’un système de charge externe est fourni avec une borne pour
connexion à pied d’oeuvre ou des fils de raccordement, les directives
d’installation préciseront que l’installation prévoit uniquement l’utilisation
de fils de cuivre.
F) Avec un système de charge externe, lorsque l’unité n’est pas livrée avec
une borne de raccordement à pression ou le matériel de fixation, le manuel
d’ultilisation devra indiquer quels assemblages de bornes à pression ou de
bornes de composant doivent être utilisés avec l’unitié.
G) En référence au point f), les boîtiers d’assemblage des bornes et le manuel
d’utilisation doivent comprendre des renseignements indiquant la taille des
fils et la raison sociale du fabricant, la marque de commerce ou toute autre
inscription descriptive permettant d’identifier l’entreprise responsable de la
fabrication de produit.
H) Lorsqu’une borne de raccordement à pression fournie sur un système de
charge externe pour un conducteur installé sur place nécessite d’utiliser un
outil inhabituel pour fixer le conducteur, les directives d’installation
préciseront la nature de l’outil et les instructions pour l’utiliser.
I) Le Manuel d’utilisation d’une unité dans laquelle l’essai anormal se
termine en utilisant le circuit de dérivation prévu plutôt que le dispositif
de protection actuel devra comprendre le terme << ATTENTION >> et la formule
suivante ou un équivalent : << Afin de limiter le risque d’incendie, raccorder
uniquement à un circuit équipé d’un dispositif de protection contre les.
LECTRICEBIKES.COM | 602.715.0907
65
The latest version of your manual is available at lectricebikes.com/manual
References
- HelpDocs
- Lectric eBikes - Electric Bikes Built so Everyone Can Ride
- Your First Ride - HelpDocs
- Lectric eBikes - Electric Bikes Built so Everyone Can Ride