LECTRIC eBIKES XP Lite Rear Rack User Guide
- October 30, 2023
- LECTRIC eBIKES
Table of Contents
LECTRIC eBIKES XP Lite Rear Rack User Guide
STEP 1: REMOVE THE TAILLIGHT
a. Follow the cable from the taillight, cut the zip ties and pull apart the
quick plug connection.
b. Using a 4mm Allen key, remove the taillight bracket from the bike frame.
Then, remove the light from the taillight bracket with a 4mm Allen wrench.
STEP 2: MOUNT REAR RACK
In order to mount the rear rack straight, the 4 bolts must be tightened in intervals.
a. Use a 4mm allen key to mount the rear rack. Secure the rack at the
insertion points diagonally.
b. Begin tightening the bolt on the right side of the wheel as you tighten the
bolt left of the taillight mounting point. Do not tighten all the way.
c. Insert the bolts on the left side of the wheel and the right side of the
taillight mounting point and tighten these halfway.
d. Continue tightening the bolts in intervals diagonally to mount the rear
rack straight.
STEP 3: MOUNT TAILLIGHT TO RACK
a. Using the two bolts on the back of the taillight, mount the light to the
back of the rear rack.
b. Secure the quick plug/wire along the rack with a zip tie and replug the
connection.
Read More About This Manual & Download PDF: