LECTRIC eBikes Phone Mount Instructions
- June 8, 2024
- LECTRIC eBIKES
Table of Contents
LECTRIC eBikes Phone Mount Instructions
PACKING LIST
-
PHONE HOLDER
-
FIXED CLAMP
-
SILICONE PADS (6)
PARTS
- Lock Lever
- Fixed Clamp
- Joint Ball
- Nut
- Socket
- Lower Arm
- Upper Arm
- Red Swìtch
STEP 1
Tighten the screw and press the lever towards the fixed clamp to LOCK .
STEP 4
Make sure the red switch on the back is set to the UNLOCK side. Use your phone
to push the lower arm of the phone holder down and set your phone in place.
STEP 5
Click the red switch on the back to LOCK
HOW TO USE
STEP 1
Unscrew the nut and place the nut around the joint ball Press the joint ball
into the socket on the phone holder until it securely snaps in place. Then,
tighten the nut.
STEP 2
Loosen the fixed clap and mount it on the handlebars.
NOTE
Add or remove the silicone pads, and cut the extra material according to the
diameter of the handlebar.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>