AUSDOM A261 HD Car DVR Camcorder Instruction Manual

**AUSDOM A261 HD Car DVR Camcorder Instruction Manual

**

Welcome to choosing our Car DVR
This Instruction Manual is to explain how to use our car DVR properly, and offer you detail about operation, installation, cautions and technical specification Please read the manual carefully before operation, and keep it properly for future reference.

Product Overview
This unit is one mini size and HD camcorder with advanced HD technology, shooting; USB transfer and battery recharge function.

Feature:
Compacted unit size, 130 degree wide viewing angle and high resolution lens, rotatable panel, good for video recording, shooting in high resolution at various, spots.

• 2.0inch TFTLCD display. -6 layers Al Glass lens, focusing range: 60CM to Infinity
• Builtin Micro phone/Speakers
• Compatible with TF(SDHC) memory card up to 64GB
• HD out socket for HD display
• Loop recording/Motion Detection/Seamless recording
• Auto screen saver (wake up screen by any button on panel)
• Warning Voltage : Auto power off and save videos under 3.65V, recharge reminder, Working Voltage: 3.7V
• Auto power on and record while auto engine started.
• Time-lapse powering off after disconnected with car power.
• Instant Mute function.
• Video restore function if damaged.
• G-sensor
• Parking Monitor: Collision or shaking will trigger to start recording.
• LDWS/FCWS function
• Automatic time setting via GPS

Panel lllustration

1. Menu/Return
2. Playback/UP/Mute
3. Snap/Down/Lock button
4. Recording/OK
5. Mount socket
6. Micro USB
7. HD Out
8. Reset button
9. Power on/off button
10. Micro SD slot
11. Lens

Button Illustration

1. Power Switch: Press to power the unit on, hold it for 3 seconds to power off
2. Recording/OK: Press to  start/stop recording. In Setting Menu, press to confirm settings When video preview, press to confirm playing selected video/images When video playback, press to stop playback.
3. S0S/DOWN: When recording, press to lock down the video in recording. Press to select next menu/video/image Invideo preview, press to take a shooting.
4. MIC Switch/ UP: When recording, press to open/shut down MIC (Open is defaulted) Press to select next menu/video/image MENU/Return : When recording, press to to enter settings. When video preview, press to enter/exit settings When video playback, press to return to preview interface.
5. Reset: When unitis down to work, press Reset button to get it work.

Host on panel

1. Micro SD slot: Load TF card in properly direction according to sign on panel before recording or shooting. Please choose high speed TF card complying with SDHC specification. High speed TF card will be marked C6/C10. Class 6 or above is suggested. If memory card is not compatible with our device, unit may not read the card. Please load the card, and format it.
2. HD Out: Connect HD cable with TV set to play videos. Please refer to indication on TV for further operation.
3. USB: Micro usb Connect with DC wire to recharge the unit. When low battery, unit can work while recharged.
   Micro usb Connect with PC to view or select files in the memory card.
   Note: Keep unit OFF before connected with PC to keep away from damage by high circuit.
   Micro usb can not be connected with DC or USB wire to keep away from damaging the unit.

LED light illustration

1. Recharging LED: The LED will light up when recharging. When recharge finished, the LED light will turn off.
2. Recording LED: Blue LED will flash while recording. When stop recording, blue LED will stop flashing to lighting up.

Battery recharge

1. Connect unit with the car cigarette. Unit can be recharged when working or power-off.
2. Connect unit with PC through the USB wire. Unit can be recharged when working or power-off.
3. Connect unit with USB power adapter. Unit can be recharged when working or power-off.

Warning: Turn unit off when connecting with PC to keep away from damaged by high circuit.

Remaining power indication

1. Please refer to following pictures.
   

2. Battery recharge

Connect with 12V/24V car power
Unit can be recharged by connected with PC or DC power adapter

1. Before recording, please enable the “Loop recording” function in the Menu list and keep the unit connected with car power. When car engine is started, unit will automatically turn on. When car engine is stopped, unit will keep on recording for 15 seconds, and automatically power off after saving recordings.
2. Please only use 5V output car power adapter for the unit, otherwise, it may damage the unit or cause malfunction.

Power ON/OFF and Auto Power Off

1. Press Power switch to power on the unit, and hold the switch for three seconds to turn it off,
2. To save battery power, the Auto Power Off time can be set. Unit will automatically  power off if no operation within the time.

Setting Menu

In preview mode, press Menu button to enter top Menu:

1. Video Resolution: 25601080 30 fps 21:9/23041296 30 fps 16:9/ 19201080P 30fps 16:9 / HDR 19201080P 30fps 16:9/ 1280720 60fps 16:9/1280*720 30fps 16:9.. Choose the video resolution, the higher it is, more clear the videos will be.

2. Loop recording: Off. 1Minute.

3. Minutes. 5Minutes Set the time length of each video section for loop recording. If Loop Recording is disabled, recording will be stopped while memory space runs out.

4. Motion Detection : Off, On If any movement is detected by the lens, unit will automatically start recording, and will stop when no movement. 4.Parking Monitor—On/Off Parking monitor function is triggered by the G sensor in the unit. When parking monitor is OFF, the G sensor and CPU will not work. When itis On, unit will be switched to Parking Monitor Mode after shutting off.

5. Image Quality : S Fine. Fine. Normal Setthe video definition, the higher itis, the more clear videos will be

6. Mic: Off. On

7. Stamp: Date. Time. Driver ID Date, time, Driver ID will be stamped at the right bottom corner of videos if it is enabled.

8. G-Sensor: Off、High、Medium、Low
   If any shaking or collision occurs while recording, unit will automatically lock down the video in recording. A Lock sign will appear on the right top corner of the screen. After recording, the locked videos will be protected, it will not be covered by loop recording.
   Note: The sensitivity of G sensor can be set. Medium is defaulted.

9. White Balance: Auto, Incandescent、Sunny、Cloudy, Fluorescent As the color of objective is subject to color of light source, videos recorded may own different color temperature. Please set the white balance properly.

10. Ev: -2.0/-1.7/-1.3/-1.0/-0.7/-0.3/0/0.3/0.7/1.0/1.3/1.7/2.0/.
    Fill light according to different light source intensity in different environment.

11. LDWS/FCWS : Off, On
    LDWS: Enable this function to warn drivers when car is departing the lane.
    FCWS: Enable this function to keep cars away from rear-end collision.
    LDWS/FCWS Calibration:
    When entering the Calibration interface, there will be one pink and red lines on screen. Press UP/Down button to move the pink line to junction of earth and sky. Press Menu button and go to set red line. The red line should be moved to parallel with the car head. Press OK to confirm.
    

12. Languages : English/Russian

13. Date/Time:

14. Set the date and time. Press UP/Down button to set properly, press OK to save your setting and exit.

15. Beep : On. Off
    Turn On/Off Beep sound

16. Auto Power Off: Off, 1 Minute, 3 Minutes. 5 Minutes
    When no operation on the unit within the time, unit will automatically power off.

17. Backlight Off:
    On, Off When no operation on unit, display will go off. Press any key to wake the unit up.

18. Card Volume:
    Total Volume. Used. Remai Show the memory card remaining capacity

19. Driver ID
    Stamp the car plate number into the videos

20. Format: OK. Cancel Format the memory card 20.Default Setting: OK, Cancel
    Reset the unit to default settings

21. Version Info : Unit firmware version information

22. Delete : Event. Normal Enter Menu list and select Delete. Unit will go to video preview pages. Select file folders (Event Videos, Normal Videos). Press OK button to choose videos you want to delete or delete all.

Other function

Instant Mute
When recording, press button to mute MIC. Press again to resume.

SOS
While recording, press button to lock down the video in recording. The locked video will not be deleted by loop recording.

Video restore
When unit is in low power or down to work, it may damage the video files. When started next time, unit will automatically restore damaged videos.

Videos Backup

1. Connect unit with PC through USD wire, unit will be in Mass Storage mode. All videos are stored in Even and Normal folders of memory card. All locked videos are stored in Event folder, and others are stored in Normal folder
2. PC Operation System: Windows XP2/Vista/Windows 7/Windows 8

GPS Tracking
Install the bracket properly, and connect with DC power through Micro usb port. There is a GPS mark on the top left corner of the screen. If showing icon, unit is still searching GPS satellites. If  icon on screen, the unit has been positioning properly. Play the videos by our GPS player, car location and running route etc will be display on Google Maps.

GPS Player instruction

1. Suggested system : windows XP or above

2. Install: click QtPlayer_v1.0.exe , install the Quick Installer firstly , after finish, start Qt Player

3. Interface instruction
   

4. Video play area

5. Operation buttons

6. Play list

7. GPS Map area: If there is no GPS information, this area will not show map.

8. GPS coordinate Speed, G-sensor area

9. Operation buttons instruction:

Snap pic. in video
Choose the folder to play
Choose the files in the play list
Play control button: previous/stop/next
Delete video from play list
Video information: time, volume, file size
Exchange between 2G map and google map

Play on TV

1. HD OUT
   Power the unit on, and set to video playback mode. Connect unit with TV through HDMI wire, switch TV to HDMI model and press Play button to get videos played onTV.

Tips:
If unit is down to work by wrong operation,please press RESET button and restart the unit.

Technical Datasheet

30fps 16:9 1 HDR 19201080P 30fps 16:9/ 1280720 60fps 16:9/1280°720 30fps 16:9
Motion Detection| ON/OFF
Audio Recording| ONIOFF
Image Resoluon| 4M Pixels
image Format| JPEG
Memory Card| Micro SD card up fo 64GB
MIC/Speaker| Built In
Back ight Off| ON OFF

Note: No changes for the above datasheet without notice

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>