AUSDOM E9 Pro Wireless Headset User Manual
- June 8, 2024
- AUSDOM
Table of Contents
E9 PRO
User Manual
E9 Pro Wireless Headset
The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Introduction
Thank you for purchasing the Mixcder E9 PRO wireless active noise cancelling
headphones. Mixcder E9 PRO active noise cancelling technology detects the
noise around you can cancels it out while travelling, working, or going
anywhere, helping you focus on what you want to hear. The look of E9 PRO is
fashionable and its package is eco-friendly. Built-in rechargeable battery
provides sufficient music playtime and standby time. Fast charging enables
that five minutes of charging provide for two hours or playtime. It’s designed
to sound better, filter out noise, be more comfortable and easier to carry.
E9 PRO can be used in both wired and wireless modes via 3.5mm audio cable and
wireless V5.0 to communicate with your wireless-enabled device within 10
meters. Its powerful and bass-rich speakers bring you amazing and
unprecedented audio enjoyment.
Note: Please read the user manual carefully before using and keep it
properly for future reference.
Package Contents
- Wireless headphones
- Micro-USB charging cable
- 3.5mm audio cable
- Compact carrying case
- Airplane adapter
Product Overview
1. Microphone
2. 3.5mm line-in port
3. Power button
4. Previous track / volume+
5. Next track / volume-
6. LED indicator| 7. Micro-USB interface for charging
8. ANC switch
9. Micro-USB charging cable
10. 3.5mm audio cable
11. Airplane adapter
---|---
Charging the Headphones
Use the supplied micro-USB charging cable to recharge the headphones. It takes
approximately 1.5 hours for the first charge, and only one hour for subsequent
recharges. The headphones LED turns to solid red during charging. When the
battery is fully charged, the LED turns green. In order to not affect the
charging time, please turn off the wireless function during charging, but you
can use the headphones with the audio cable.
When the battery is low, the LED indicator light blinks red. At the same time
the headphones also provide a low battery warning tone.
Note: It is strongly recommended to fully charge before the first use.
Playtime varies according to the volume level and audio content.
Pairing with Wireless Devices
First, make sure the headphones are off. Do not place both devices more than
one meter away from each other. Turn on the wireless function of your device.
Then, press and hold the power button on the headphones until it powers on,
but don’t let go just yet. Continue holding down on the power button until you
see the LED indicator flash blue and red alternately, which means your
headphones are in the pairing mode, waiting to be paired with your device. You
will hear a prompt. After that, select “Mixcder E9 PRO” to pair. Once
successfully paired, the LED flashes blue. You will hear a prompt. When
connected with Qualcomm aptX Low Latency device, the LED turns blue.
Notes:
- Before pairing the headphones with a computer, please make sure your computer or laptop has the built-in wireless feature. If not, you must purchase a wireless dongle, preferably of version 2.1 or above.
- Mixcder E9 PRO will pair with the last device automatically when powered on. Because of different systems, some computer or laptops may need to be manually connected every time.
Active Noise Cancelling
Mixcder E9 PRO contains a noise cancelling circuit. This means that noise
produced by airplanes, buses or trains is effectively reduced. The noise
cancelling effect may not take effect in a very quiet environment and some
ambient noises still may be heard. It also depends on how you wear the
headphones. The noise cancelling function works for noise in the low frequency
band primarily. Although noise is reduced, it is not cancelled out completely.
Making and Answering a Call
Making a Call
Make sure the headphones are paired with the mobile phone. Dial through the
mobile phone and press the call button on the phone. To end the call, press
the power button
once or end the call directly on the phone.
Answering a Call
Make sure the headphones are paired with the mobile phone. Press the power
button on your headphones to answer the call using headphones. If you are
listening to music,
it will pause automatically. To end a call, press the button once again or end
the call directly on the phone. As soon as the call is ended, the music will
continue to play automatically.
Used as a Wired Headphones
There is a 3.5mm audio port in the right side of the ear cup in which you can
pug the included audio cable. It enables you to connect ANC1 to other devices
via 3.5mm audio
cable. When the headphones’ battery is low, you can still enjoy the music
without worrying about battery drain.
Note: The microphone doesn’t work when used as wired headphones.
Taking Care of Your Headphones
- Store the headphones in a dry place when it powers off.
- If you don’t use the headphones for a longer period of time, charge the battery at least every two months for one hour.
- Use a dry cloth for cleaning if needed.
- Avoid dropping the headphones from high places or on hard surfaces.
- Avoid exposing the headphones to extreme temperature.
- Recommended storage temperature is between -40 °C to 80 °C.
- The headphones are not waterproof. Avoid exposing the headphones to rain or getting liquids into any button port or other openings.
- Please don’t twist or bend the headphones. This may cause permanent deformation.
- The built-in battery can’t be disposed in the fire to avoid explosion.
Protecting Your Hearing
The headphones are held close to your ears, so loud sounds pose a potential
hearing risk. It is highly recommended that you set a low volume level before
putting on the headphones and avoid exposing yourself continuously to high
volumes. If you need to use the headphones for a long period of time, rest ten
minutes per half hour using.
Control Instructions
Power ON| When the headphones are off, press and hold the power button for
three seconds, you will see the blue light and hear “power on”.
---|---
Power OFF| When the headphones are on, press and hold the power button for
three seconds, you will hear “power off’ and the LED flashes red.
Pairing| Press and hold the power button for about five seconds until the red
and blue light flash alternately. You will hear “pairing”.
Increase volume| Press the volume up button.
Decrease volume| Press the volume down button.
aptX / Qualcomm aptX Low Latency mode| When Qualcomm aptX Low Latency device
is connected, the LED turns blue.
Play music/video| Press the power button.
Pause/restart music/video| Press the power button.
Skip to next track| Press and hold the volume up button for one to two
seconds.
Skip to previous track| Press and hold the volume down button for one to two
seconds.
Answer the call| When the call rings, press the power button.
End the call| To end the call, press the power button.
Noise cancelling ON| Push the ANC switch to ON, blue light is on.
Noise cancelling OFF| – Push the ANC switch to OFF, blue light is off.
Note: There will be an alert tone when the volume reaches the maximum level.
Troubleshooting
Q: The headphones cannot be turned on.
– A: The battery may be discharged. Please recharge the battery and try again.
Q: Why don’t the headphones pair with the mobile phone?
– A: Please, check the following:
• Check that the headphones are on a full charge.
• Make sure that the mobile phone’s wireless function is on.
• Make sure the device is not connected to another wireless audio devices.
• Make sure the two devices are in the effective pairing range (10 meters).
• Make sure that there are no obstacles between the headphones and the mobile
phone, such as electronic equipment and a wall.
• Furthermore, make sure that the headphones are in a pairing mode and pair
them with your device again.
Q: There is no sound.
– A: Please check the following:
• Try increasing the volume.
• Make sure that the wireless function is on and whether the two devices are
connected and within 10 meters with no obstacles.
Q: My device cannot find the headphones.
– A: Please check that the headphones are in pairing mode. Refer to the
“Pairing with Wireless Devices” chapter. Sometimes when the headphones are
connected to too many
wireless devices, it cannot search and pair effectively to other devices. Or
maybe your device is connected to too many wireless devices already. Try
removing some connections before searching the headphones.
Specifications
Microphone| Microphone unit size|
---|---|---
4×1.5mm
Directivity| Omni-directional
S.P.L| -42dB
impedance| .fl.2K51
Operating voltage| 2V
Speakers| Speaker diameter| 040mm
impedance| 320
S.P.L| 120dB
THD| <3%
Frequency response| 20Hz-20KHz
Wireless technology| Wireless version| V5.0
Wireless distance| 10 meters
Transmission frequency| 2.402GHz-2.48GHz
Support profile| HSP/HFP/A2DP/AVRCP
Pairing name| Mixcder E9 PRO
Battery| Battery type| Built-In 500mAh rechargeable lithium battery (fast
charging supported)
Charging port| Micro-USB 5V/1A
Playtime| -35 hours (ANC OFF) -30 hours (ANC ON)
Stand-by time| More than 2500 hours
Charging time| -1 hour
Operating temperature| -10°C-45°C
Note: Features and technical specifications are a subject to change
without prior notice.
We apologize for any inconvenience.
Warranty Conditions
A new product purchased in the Alza.cz sales network is
guaranteed for 2 years. If you need repair or other services during the
warranty period, contact the product seller directly, you must provide the
original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
Subject of the declaration:
Title: Wireless headphones
Model / Type: Mixcder E9 PRO
The above product has been tested in accordance with the standard(s) used
to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
**** Prague, 23.8.2021
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk