AUSDOM AMCAP Software User Manual
- June 5, 2024
- AUSDOM
Table of Contents
AMCAP User Manual
Introduction
This manual is not to tell you how to use the AMCAP software, because all
settings are simple. In this guide, we present carefully some settings shown
in Chinese.
Besides, what you adjust from the AMCAP may not default when you use other
software.
But what you set under Options will default even when you use other software
to record videos.
NOTE: the AMCAP software is compatible with all AUSDOM webcams, and you
could select t to stop the autofocus function via AMCAP. The exact steps are
not shown in this manual, if you need them, plz contact us via
support@ausdom.com and you will get in touch in
48hrs.
When you open the AMCAP software, there are 6 function options at the top:
File, Devices, Options, Capture, Photo, and Help.
File:
→Click “set capture directory….” to save captured videos wherever you want on
your PC
→Click “set photo directory….” to save captured photos wherever you want on
your PC
→Click “save captured video as….” to name captured videos and save them on
your PC
Devices: To select the video/audio devices that you want to use when you plugged in several webcams or earphones in your PC.
Options:
→ Default “Preview” when you open the “Options” function
→ Click “audio capture filter….” to adjust audio parameters(when the AUSDOM
webcam is plugged in, there is no need to adjust as the AUSDOM webcam is set
when it is published)
→Click “video capture filter….” to adjust video parameters
Note: When you want to customize some of the parameters of recording video, please uncheck the automatic option(the corresponding option box below 自动) of this parameter.
→ Click “video capture pin….” to adjust stream format parameters.
Capture:
→Click “Start Capture” to start video recording (then the system will ask you
to select a directory to save the video)
→Click “Stop Capture” to stop video recording.
→Click “Capture Video” / “Master Stream” to select the option you want.
→ Click “Set Frame Rate…” to set the video frame rate(if the software that you
use supports frame rate adjustment, you could adjust directly from the
software).
→Click “Set Time Limit…” to set the time that you want to record(If you want to end recording before the deadline, you could click on stop capture).
→Click “Capture Compressor” to compress the output video.
Photo:
→Click “Photo” to capture a photo.
→Click “Set Photo Capture” to choose photo format and clarity.
Help: To show the version you used.