AUSDOM Z63-HOLA98PRO Hola 98pro Wireless Mechanical Keyboard User Manual

User Manual

Hola98 Pro
Wireless Mechanical Keyboard

Product Overview

1. Fn+Esc : Fn Lock Switch

2. Fn+F1 : Decrease the screen
   brightness

3. Fn+F2 : Increase the screen
   brightness

4. Fn+F3 : Multi-windows display

5. Fn+F4 : Switch Applications

6. Fn+F5 : Voice Assistant

7. Fn+F6 : Search

8. Fn+F7 : Previous track

9. Fn+F8 : Play/Pause

10. Fn+F9 : Next track

11. Fn+F10 : Mute

12. Fn+F11 : Volume down

13. Fn+F12 : Volume up

14. Fn+ :BT1 pairing channel

15. Fn+ : BT2 pairing channel

16. Fn+ : BT3 pairing channel

17. Fn+O: Switch to MAC System

18. Fn+P : Switch to Windows System

19. Fn+ : Check battery level
    (Not supported in wired mode)

20. Fn+ : Press and hold 3 seconds to restore
    factory settings

21. Caps Lock
    Number Lock
    Power indicator

22. Fn+ : Decrease the backlit

23. Fn+ : Press once to switch the backlit effect, pres hold for 5 seconds to turn ON/OFF backlit €

24. Fn+ : Increase the backlit

25. Wired connection mode
    2.4G USB connection mode
    BT connection mode

26. Power Switch

27. Wired connection port / Charging port

Tips:

1. The “F1-F12” keys’ function is default Multi-media control.
2. Fn+Esc: Press and hold “Fn+Esc” key once to open/close “Fn” function which is called “Fn Lock”. And the main function that is a solution to switch “Multi-media control” or “F1/F2…F12” control. The “Ese” key’s backlit would stay on 3 seconds and then turns off when the “Fn Lock“ is on.

What’s in the box?

1 AUSDOM Hola98 Pro Keyboard (USB Receiver included)
1 USB-C Cable
1 User Manual
3 Keyboard Switches
1* 2-in-1 Switch and Keycap Puller

Charging

• Fully dry off the USB-C charging port before charging.
• Fully charge the keyboard before the first use.

When the power of the keyboard is too low, the power indicator light will flash red. Please charge in time to ensure normal use.

The power indicator stays on red light when in charging status, and it will turn to green when fully charged.

Note: When the power level is low, the transmission of the keyboard may be delayed, stuck and unstable.

Wired Connection Mode

1. Plug the USB-C cable to the keyboard’s USB-C port and the computer’s USB-A port, it can support the wired connection function and also can charge the keyboard.
2. Turn the Power switch to ON, and turn the Mode switch to wired connection mode , then the power indicator light stays on 3 seconds and light off
   Note: In wired connection mode, the “ON/OFF” power switch has no function.
   The default is wired connection mode when the keyboard is powered off.

2.4G USB Connection Mode

1. Turn the power switch to ‘ON’ with mode switch on ‘2.4G’, the power indicator light stays on 3 seconds and then light off
2. Plug the USB receiver into the device’s USB port, then it can plug and play.

BT Wireless Connection Mode

1. Turn the Power switch to ON and turn the Mode switch to BT connection mode, then the power indicator light stays on 3 seconds and light off
2. Press and hold “Fn+ ”(BT2 or BT3) for 3-5 seconds, then the keyboard turns to “pairing” mode and the keys’ backlit indicator flashes rapidly
3. Turn on the device’s “Bluetooth” function, search and select “Hola98 Pro” for pairing.
   Note: The system can not support the Bluetooth connection below Windows

Mode and System switching

1. 5 Keyboard Mode Channel: BT1/BT2/BT3/2.4G/Wired Connection.

2. Mode Switch: You can select the connect mode between Wired-2.4G-BT. Also, you can switch the BT1-BT2-BT3 when in BT mode.
   MAC/Windows system switch
   

3. MAC/Windows system switch: Press “Fn+O” once to switch to MAC system, and press “Fn+P” once to switch to Windows system.
   Note: The keyboard can identify system automatically when power on.

Indictor

seconds and then turns off
Red| When the battery power of the keyboard is low, the red light flashes rapidly, Please charge as soon as possible
Stays on Red| In Charging
Stays on Green| Fully Charged
Caps Lock| White/Off| Caps status light will stay on /Off
Number Lock| White /Off| Number Lock is on/Off

Specifications

Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.

Warranty

The keyboard is covered by a 1-year manufacturer warranty.
For more information, please contact [email protected]

Safety Instructions

Warning: Fire, electric shock, damage to keyboard device could occur if the following instructions are not obeyed
Danger (high risk) x Warning (Moderate risk) 4 Note (Poor risk)
1. Away from edge tool
2. Away from microwave radiation source
3. Do not place heavy objects on this product
  4. No shocking and bending
5. Away from oil, chemical, or organic solvents

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

** This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can beused in portable exposure condition without restriction.

WARRANTY CARD
ATTENTIONS:
-Please read the return procedures and warranty policy carefully on www.ausdom.com before sending items back to point-of-purchase.
-Please fill the card and send it to your reseller together with the product if your product’s warranty is valid.
S.N:
Date of Purchase:
Product Model:
RMA Number:
Return Reason:
Customer Name:
TEL:
E-mail:
Address:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>