AUSDOM ANC1 Wireless Headphones User Manual

User Manual

MODEL: ANC1 Wireless Headphones

Package Contents

-1 x Wireless Headphone
-1 x Micro USB Charging Cable
-1x 3.5mm Audio Cable
-1 x User Manual
-1 x Compact Carrying Bag

Product Overview

1. Previous Track/ V+
2. Power Button
3. Next Track/ V4.3.5mm Line-in Port
4. Microphone
5. Micro USB Interface for Charging
6. LED Indicator / Charging LED / ANC LED Indicator
7. ANC Switch
8. Micro USB Charging Cable
9. 3.5mm Audio Cable

Charging the Headphone

Use the supplied micro USB charging cable to recharge the headphone. It takes about 2.5 hours for the first charge and only 2 hours for a subsequent charge. The headphone
LED turns to solid red during charging. When the battery is fully charged, the LED tums to solid blue. In order not to affect the function in charging time, please turn off the
wireless during charging, and you can use the audio cable.
When the battery is low, the LED indicator lights up red. At the same time, the headset also provides a low battery warning tone.
Note: It is strongly recommended fully charge for the first use. Playtime varies according to volume level and audio content.

Micro USB charging cable to the USB interface for charging

Pairing with Wireless Devices

4-1 Pairing the Headphones with a Computer
Before pairing your headset with your computer, make sure your computer or laptop has Bluetooth wireless capabilities. If not, you must purchase a Bluetooth wireless dongle,
preferably 2.1 or higher.

1. Make sure the headphone is off.
2. Turn on the wireless capability on the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than 3ft/1m away from each other.
5. Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED  indicator flashes blue and red alternately, which means your headphone is in “pairing mode” waiting to be paired with your device. You will hear a prompt.
6. As soon as the computer system detects the new device, please select “AUSDOM ANC1” to pair. Once successfully paired, the LED flashes blue. You will hear a prompt.

42 Pairing the Headphone with a Phone

1. Make sure the headphone is off.
2. Do not place both devices more than 3ft/1m away from each other.
3. Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED  indicator flashes blue and red alternately, which means your headphone is in “pairing mode”waiting to be paired with your device. You will hear a prompt.
4. Turn on the wireless capability on your phone and search for new devices.
5. Select the “AUSDOM ANC1” to pair. Once successfully paired, the LED flashes blue. You will hear a prompt.

4-3 Connecting to Paired Devices
AUSDOM ANC1 will pair with the last paired device automatically when turned on. Because of different systems, some computers or laptops may need to be manually paired every time.

Active Noise Canceling

AUSDOM ANC1 contains a noise canceling circuit, noise mainly in an airplane, buses, or trains is effectively reduced.

1. The noise canceling effect may not be pronounced in a very quiet environment, or some noise may be heard.
2. The noise-canceling effect may vary depending on how you wear the headphone.
3. The noise canceling function works for noise in the low-frequency band primarily. Although noise is reduced, it is not canceled out completely.
4. When you use headphones on a train or a car, noise may occur depending on street conditions.

Making and Answering a Call

6-1 Making a Call

1. Make sure the headphone is paired with the mobile phone. Dial through the mobile phone and press the call button on the phone.
2. To end a call, press the power button once or also end the call directly by phone.

6-2 Answering a Call
Make sure the headphone is paired with your phone. Please refer to chapter 5. Pairing with Wireless Devices.

1. Press the power button on your headphone to answer the call through headphone. If there is music playback, it will pause.
2. To end a call, press the power button once again or also end the call directly by phone.
3. As soon as the call is ended, the music will continue to play automatically.

Used as a Wired Headphone

There is a 3.5mm audio port on the right side of the ear cup into which you can plug the included audio cable.
It enables you to connect ANC1 to other devices via a 3.5mm audio cable. When the headphone’s battery is low, you can still enjoy the music without worrying about battery drain.
Note: The microphone can’t work when used as a wired headphone.

Caution

• Store the headphone in a dry place when it powers off.
• If you don’t use the headphone for a long period, charge the battery every 2 months for 1 hour.
• Use a dry cloth for cleaning if needed.
• Avoid dropping the headphone from high places or on hard surfaces.
• Avoid exposing the headphone to extreme temperatures. (Recommended Storage temperature is -40°C-80°C.)
• The headphone is NOT waterproof. Avoid exposing the headphone to rain or getting liquids into any button port or other openings.
• Please don’t twist or bend the headphone. This may cause permanent deformation.
• The built-in battery can’t be disposed of in the fire to avoid an explosion.

Protecting Your Hearing

The Headphone is held close to your ears, so loud sounds pose a potential hearing risk. It is highly recommended that set a low volume level before putting on the headphone
and avoid exposing yourself continuously to high volumes. If you need to use the headphone for a long period, rest for ten minutes for a half hour using them.

Control Instructions

seconds, and you will see the blue light flash and hear “power on”.
Power off| Power off When the headphone is on, press and hold the power button for 3 seconds, and you will hear “power off”.
Pairing| Press and hold the power button for about 5 seconds til the red and blue light flash alternatively, and you will hear”.
Increase volume| Press the Volume Up V+ button
Decrease volume| Press the Volume Down V- button
Play music/video| Press the power button
Pause/restart music/video| Press the power button
Skip to the previous track| Press and hold the V+ button for 1-2s
Skip to the next track| Press and hold the V- button for 1-2s
Answer a call| When a call rings, press the power button
End a call| To end a call, press the power button
Noise Cancelling On| Push the ANC switch to ON, and the blue light is on.
Noise Cancelling Off| Push the ANC switch to OFF, the blue light is off.

Note:
There will be an alert tone when the volume reaches the maximum level.

Troubleshooting

Q: The headphone cannot be turned on.****

A: The battery may be flat. Please recharge the battery and try again. Refer to chapter 4. Charging the Battery.

Q: Why doesn’t the headphone pair with the mobile phone?****

A: Please check the followings.
– Check that the headphone is on full charge.
– Make sure that the mobile phone’s Wireless function is on.
You can clear all connection history on your phone.
– Make sure other paired devices’ wireless function is turned off.
– Make sure the two devices are in the effective pairing range. (33 feet/10 meters).
– Make sure that there is no obstacle between the headphone and the mobile phone, such as electronic equipment and a wall.
– Furthermore, make sure that the headphone is in pairing mode, and pair it with the phone again.

Q;: There is some noise.****

– A: Wireless is a radio technology, so it is sensitive to obstacles between the headphone and the pairing device.
Please make sure that there is no obstacle between the two devices and is within 33 feet/10 meters.

Q: I can’t hear sound.****

A: Please check the followings.
-Try to increase the volume.
– Make sure that the Wireless function is on and that the two devices are connected and within 33 feet/10 meters.

Q: My mobile phone or computer cannot find the headphone.****

A: Please check that the > headphone is in pairing mode.
– Refer to chapter 5. Pairing with Wireless devices. Sometimes when the headphone is connected to too many Wireless devices, it cannot search and pair effectively. Or your mobile phone and computer are already connected to many other devices. Try removing some connections before searching for the headphone.

Warranty

The ANC1 is covered by a 1-year manufacturer warranty. For more information, visit: www.ausdom.com

CAUTION RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Specifications

About 22-hour talk/music time (ANC ON)
Standby time| About 2500 hours
Charging time| About 1 hour
Operating temperature| -10°C-45°C

Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.

CAUTION RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to the European
directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give their product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WARRANTY CARD

ATTENTION:
– Please read the return procedures and warranty policy carefully on www.ausdom.com before sending items back to point-of- purchase.
– Please fill out the card and send it to your reseller together with the product if your product’s warranty is valid.

S.N:|
---|---
Date of Purchase:|
Product Model:|
RMA Number:|
Return Reason:|
Customer Name:|
TEL:|
E-mail:|
Address:|

For more information, please visit our official website www.ausdom.com
Your valuable comments and suggestions on improving AUSDOM products are welcomed!
support@ausdom.com sales@ausdom.com
www.ausdom.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>