OREIN LS56001 Smart Solar Flood Light Outdoor with APP Control User Guide
- June 17, 2024
- OREIN
Table of Contents
OREIN LS56001 Smart Solar Flood Light Outdoor with APP Control
Install mounting plate
- Use a power drill (not included) to drill the holes on your chosen mounting surface. Use 2 of the drywall anchors and screws to fasten the mounting plate on the wall. Buckle the motion light into the mounting plate securely.
- Illustrations show correct wall mounting, incorrect eave mounting, and the process of installing the mounting plate.
Mount solar panel
- Optional: Use a power drill (not included) to drill the holes in the wall. Use 2 of the included drywall anchors and screws to fasten the solar panel to the surface.
- Illustrations depict removing the solar panel and mounting the solar panel to a surface.
Connect the solar panel to the light
- Before using the solar security light, the solar panel needs to be connected to the light.
- An illustration shows the connection process between the solar panel and the light.
Installation completed
- It is recommended that the light be charged for 8-10 hours in sunlight to ensure that the battery has enough power to make the light work. Your solar security light will now begin to charge and work.
- An illustration demonstrates the solar security light in operation after successful installation and charging.
Specifications
| Feature | Description |
|---|---|
| Mounting Height | Above 6ft |
| Power Source | Solar |
| Charge Time | 8-10 hours |
| Installation | Wall Mounting (Preferred), Eave Mounting (Not Recommended) |
FAQ
- What tools are needed for installation?
- A power drill is recommended but not included for drilling holes for the mounting plate and solar panel.
- How many drywall anchors and screws are provided?
- There are 4 drywall anchors and 4 screws provided in the box contents.
- What should be done if the solar panel is not receiving enough sunlight?
- Adjust the location of the solar panel to ensure it is exposed to optimal sunlight, avoiding obstructions such as trees or overhangs.
- How long should the light be charged before first use?
- The light should be charged for 8-10 hours in sunlight to ensure the battery has enough power.
Box Contents
Tips Before Installation
- Find a location above 6ft for installation, vertical installation (wall mount) should not be lower than 6ft.
- Ensure that your solar panel is placed in an area exposed to optimal sunlight.
Be mindful of objects such as trees or property overhangs that could obstruct the panels’ ability to generate a charge.
Installation Instructions
Installation Steps
Install mounting plate
Use a power drill (not included) to drill the holes on your chosen mounting
surface. Use 2 of the drywall anchors and screws to fasten the mounting plate
on the wall. Buckle the motion light into the mounting plate securely. Now
installation is finished. But if sunlight cannot reach the solar panel with it
mounted on top of the floodlight, Please continue following steps.
Mount solar panel
Optional: Use a power drill (not included) to drill the holes in the wall. Use
2 of the included drywall anchors and screws to fasten the solar panel to the
surface.
Connect the solar panel to the light
Before using the solar security light, the solar panel needs to be connected
to the light.
Installation completed
It is recommended that the light be charged for 8-10 hours in sunlight to
ensure that the battery has enough power to make the light work. Your solar
security light will now begin to charge and work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>