Aisidra AD-BA100 Wireless 2 In 1 Adapter User Manual

Aisidra AD-BA100 Wireless 2 In 1 Adapter

What’s included

Specification

RX: aptXT™, SBC, AAC
Range| 33ft/10m
Battery Capacity| 160rnAh
Charging Power| 5V DC
Working hours| 10-12hours
Charging time| 2 hours
Operating temperature| -10to 55C
Dimension (L x W x H)| 1.88 X 1.39 X 0.43in / 4.80×3.55×1.10cm
Weight| 0.53oz/ 15g

Product Diagram

1. LED Indicator
2. Power Button
3. Transmitter Mode (TX)
4. Mode Switch
5. Receiver Mode (RX)
6. 3.5mm Audio Port
7. Micro USB Charging Port

How To Use

How To Use by Transmitter (TX) Mode

Connect to the 1st Headphones

1. Connect your device and AD-BA100 with a 3.5mm connector via an audio output interface.
   • (*TV: 3.5mm connector+ RCA connector).
2. Slide the button to TX Mode.
3. Press and hold the power button for 3 seconds, the light flashing red and blue when pairing, and the light turns to solid blue when paired.
   • Connect to the 2nd Headphones:
4. After connecting the 1st device, double-click to enter the pairing mode(the light flashes red and blue alternately), and the light turns solid blue when connected.
   • AD-BA100 will automatically reconnect to the last device within 10. If fails, please clear both the Bluetooth history of your Bluetooth devices and AD-BA100, then repeat the pairing steps.

How To Use by Receiver (RX) Mode

Connect to Smart Phone/Tablet:

1. Connect your device and AD-BA 100 with a 3.5mm connector.
   • Wired Speaker: 3.5mm connector+ RCA connector
2. Slide the button to RX Mode.
3. Press and hold the power button for 3 seconds, the light flashing red and blue when pairing.
4. Find “AD-BA100” on your device’s Bluetooth search result and tap it.
   • The light turns to solid blue when paired)

• Please keep your device and the adapter as close as possible.
• Make sure to turn off other Bluetooth devices.

LED Indicator

Notes

• Please charge the adapter for at least 2 hours before using it for the first time.
• Please place your devices and the adapter within 1 meter.
• Please turn off other Bluetooth devices that you do not want to connect while pairing.
• Available use of the adapter while charging.
• Available to connect 2 Bluetooth devices by 1 adapter.
• Available to remember two recently paired devices and will attempt to pair with them automatically when powered on.

Trouble Shooting

Fails to Pair: Clear paired list

1. Step 1: Turn off the adapter.
2. Step 2: Press and hold the power button for 7 seconds until the red and blue lights are both on and flash twice.
3. Step 3: Turn on the adapter again to pair.

Reset:

1. Step 1: Turn on the adapter.
2. Step 2: Press and hold the power button and charge at the same time.
3. Step 3: Turn on the adapter again to pair Please clear the bluetooth history of AD-BA100 and your Bluetooth devices before pairing.

Paired but no sound:

1. Please make sure you plug the connector into the audio OUTPUT interface.
2. Please check if the adapter is paired with other devices.
3. Check your TV setting, change the audio output setting to VARIABLE”. Set the TV’s internal speakers to”OFF”.

Care and Maintenance

• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or extreme heat.
• Do not try to take the adapter apart. It may cause serious damage.
• Do not drop or knock the adapter on hard surfaces as it damages the interior circuit.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.

Manufacturer

• Shenzhen Hanke Technology Co., Ltd
• Address: Meipeng SKY311, No.3, Hebei Industrial Zone,
• Zhongxing Road, Ma’antang Community, Bantian Street,
• Longgang District, Shenzhen, Guangdong, China, 518000

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must withstand any interference received including interference that may cause undesired operation.

Warranty and Service

This product is covered with an Aisidra product and labor warranty for 12 months from the date of its original purchase.
Any questions welcome to contact us: support@aisidra.com .

Extend 2-year warranty: www.warranty-hub.com

Documents / Resources

| Aisidra AD-BA100 Wireless 2 In 1 Adapter [pdf] User Manual
AD-BA100 Wireless 2 In 1 Adapter, AD-BA100, Wireless 2 In 1 Adapter, 2 In 1 Adapter, Adapter
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>