Aisidra BA020 Wireless 2 In 1 Adapter User Manual
- June 14, 2024
- Aisidra
Table of Contents
BA020 Wireless 2 In 1 Adapter
Product Information
The product is called BA020 and it is an analog audio device. It
supports both TX (transmitter) and RX (receiver) modes. It can be
used to connect a non-bluetooth soundbar or speaker to a TV or any
other audio device.
Product Usage Instructions
-
Ensure that the TX/RX switch is in the TX position if you want
to transmit audio from the BA020 to the soundbar or speaker. -
Ensure that the TX/RX switch is in the RX position if you want
to receive audio from the soundbar or speaker into the BA020. -
Choose an audio connection supported by the non-bluetooth
soundbar or speaker you are connecting to the BA020. The available
options are optical, 3.5mm, or RCA. -
If you connected your TV to the BA020 via optical input, use an
optical cable to connect the BA020 to your soundbar. -
If you connected your TV to the BA020 via 3.5mm or RCA input,
use a 3.5mm cable to connect the BA020 to your soundbar. -
Check your TV settings to ensure they are properly configured
for audio output. -
To clear the memory of previously paired devices, hold the MODE
button on the BA020 for 5 seconds until you hear the voice prompt
“Memory cleared”. -
After clearing the memory, you will need to create a new
pairing between the BA020 and your soundbar or speaker by following
the procedure outlined in the setup guide. -
If you are using the BA020 in TX mode, it allows the TV’s sound
to pass through to a soundbar or other audio device. This is useful
when your TV has only one audio output. -
Make sure the input and output connections match for the
pass-through feature to work correctly. -
For further information and support, visit www.aisidra.com.
/
/
/
/
BA020. .
Ensure the TX/RX switch is in the TX position
BA020. *
ANALOG BA020.
ANALOG BA020.
BA020. .
Ensure the TX/RX switch is in the RX position.
Choose one audio connection supported by the non-bluetooth soundbar or speaker
you are plugging into the BA020.
BA020
BA020
BA020
BA020
BA020
- BA020
Check your TV setting.
Check your TV setting.
Hold the MODE button for 5 seconds, until the voice promot “Memory cleared” is heard.
All previously paired devices will be cleared from memory
and new pairing will need to be created by procedure in
.
When used in TX mode, the audio outputs of the AD-BA020 can pass the TV’s sound through to a soundbar or other audio device. This makes it possible to plug both the AD-BA020 and a speaker into a TV that only has one audio output.
Complete
through
of this setup guide.
Pass-through only works when the input and output connections match.
If you connected your TV via optical in
, then use optical to
connect your soundbar.
If you connected your TV via 3.5mm or RCA in
, then use
3.5mm to connect your soundbar.
www.aisidra.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>