Aisidra BA100 Wireless 2 In 1 Adapter User Manual

BA100 Wireless 2 In 1 Adapter
User Manual

BA100 Wireless 2 In 1 Adapter

What’s included

Specification

Product Diagram

1. LED Indicator
2. Power Button
3. ransmitter Mode (TX)
4.  Mode Switch
5. Receiver Mode (RX)
6. 3.5mm Audio Port
7. Micro USB Charging Port

How To Use

already
Play / Pause| Click the power button in RX Mode
Clear paired list| Press and hold the power button for 7 seconds when power off
Reset| Press and hold the power button and charge at the same time when power On
Mode Switch| | Slide the button from one side to the other side
LED Indicator| Status
---|---
Flashing red and blue| Pairing
Blue light on| Paired
Light Off| Power Off
Flashing red and blue| Pairing
Flashing red and blue| Pairing
Blue light on| Play / Pause
Red and blue light both on and flash twice| Power Off
Light off| Power Off
Flashing red and blue| Pairing

How To Use by Transmitter {TX) Mode

Connect to the 1st Headphones: Connect your device and BA100 with a 3.5mm connector a audio output interface TV3.5mm connector+ RCA connector) Slide the button to TX Mode

Press and hold the power button for 3 seconds, the light flashing red and blue when paining, the light turn to solid blue when paired
Connect to the 2nd Headphones: After connecting the 1st device, double- click to enter the paining mode(the light flashes red and blue alternately),and the light turns solid blue when connected
BA100 will automatically reconnect to the last device within 10s f fails, please clear both the Bluetooth history of your Bluetooth devices and BA100, then repeat the pairing steps
How To Use by Receiver (RX) Mode Connect to Smart Phone/Tablet: Connect your device and BA100 with a 3.5mm connector (Wired Speaker. 3.5mm connector+ RCA connector) Slide the button to RX Mode Press and hold the power button for 3 seconds, the light flashing red and blue when pairing Find “BA10” on your device’s Bluetooth search result and tap it (The light turn to solid blue when paired)
please keep your device and the adapter as close as possible Make sure turn off other Bluetooth devices
LED Indicator

Notes

• please charging the adapter for at least 2 hours before using it for the first time
• please place your devices and the adapter within 1 meter
• Please tum off other Bluetooth devices that you do not want to connect while pairing
• Available use the adapter while charging
• Available to connect 2 Bluetooth devices by 1 adapter
• Available to remember two recently paired devices and will attempt to pair with them automatically when power on

Trouble Shooting

Fails to Pair:
Clear paired list:
Step 1. Turn off the adapter
Step 2: Press and hold the power button for 7 seconds until the red and blue light both on and flash twice
Step 3: Turn on the adapter again to pair
Reset:
Step 1: Turn on the adapter
Step 2: Press and hold the power button and charge at the same time
Step 3: Turn on the adapter again to pair
Please clear the Bluetooth history of BA100 and your Bluetooth devices before pairing
Paired but no sound:

1. please make sure you plug the connector into audio OUTPUT interface
2. Please check if the adapter paired with other devices
3. Check your TV setting, change audio output setting to VARIABLE Set TV’s internal speakers to” OFF

Care and Maintenance

• Keep the adapter away from heat and humidity
• Do not expose the adapter to direct sunlight or extreme heat
• Do not try to take the adapter apart.
• It may cause serious damage
• Do not drop or knock the adapter on hard surfaces as it damages the interior circuit
• Do not use chemicals or detergents to clean the product
• Do not scrape the surface with sharp objects

Manufacturer
Shenzhen Hanke Technology Co., Ltd
Address: Peiping SKY311, No.3, Hebei Industrial Zone, Zhong Xing Road, Malatang Community, Bantian Street, Longing District, Shenzhen, Guangdong, China, 518000
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must withstand any interference received including interference that may cause undesired operation

Warranty and Service
This product is covered with Paneceia product and labor warranty for 12 months from the date of its original purchase

Any questions welcome to contact us
support@aisidra.com https://drive.google.com/file/d/1-c7kplRyPRA2hFcnT_dNLiRT9RpiTvlU/view?usp=share_link
www.warranty-hub.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>