Aisidra AD-BA010 Bluetooth Transmitter Receiver V5.0 Bluetooth Adapter User Manual

Aisidra AD-BA010 Bluetooth Transmitter Receiver V5.0 Bluetooth Adapter User Manual

What’s included

Wireless 2-in-1 Adapter (Model:AD-BA010)

3.5mm Audio Cable

3.5mm Aux Connector

USB Charging Cable

3.5mm Female to 2 RCA Male Cable

Specification

10       12 hours
Charging time| 2 hours
Operating temperature| -10 to SVC
Dimension (L x W x H)| 1.9.1xxa9xx,c,11030.;
Weight| 0.53oz 7158

Product Diagram

1. LED Indicator
2. Power Button
3. Transmitter Mode (TX)
4. Mode Switch
5. Receiver Mode (RX)
6. 3.5mm Audio Port
7. Micro USB Charging Port

Care and Maintenance

• Keep the adapter away from heat and humidity.
• Do not expose the adapter to direct sunlight or extreme heat.
• Do not try to take the adapter apart. It may cause serious damage.
• Do not drop or knock the adapter on hard surfaces as it damages the interior circuit.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.

Manufacturer
Shenzhen Hanke Technology Co., Ltd Address: Meipeng SKY311, No.3, Hebei Industrial Zone, Zhongxing Road, Ma’antang Community, Bantian Street, Longgang District, Shenzhen,  Guangdong, China, 518000

How To Use

Function| Button| Operation| LED Indicator| Status
---|---|---|---|---
Power On| **| Press and hold the power button for 3 seconds.Double-click the power button when power on.| Flashing red and blue| Pairing
Blue light on| Paired
Power Ott| Light Off Flashing red and blueFlashing red and blue| Power Off PairingPairing
Pairing
Pair the 2nd device| Doubleclidc the power button while connected to the 1st device already.
Play! Pause| Click the power button in RX Mode.| Blue light on| Play / Pause
Clear paired history| Press and hold the power button for 7 seconds when power on.| Red and blue light both on and flash twice| Power On
Reset| Press and hold the power button and charge at the same time when power on.| Light off| Power Off
Mode Switch| | Slide** the button from one side to the other side.| Flashing red and blue| Pairing

How To Use by Transmitter (TX) Mode

Connect to the 1st Headphones:

1.       Connect your device and BA010 with a 3.5mm connector via audio output interface (*TV: 3.5mm connector+ RCA connector).

2. Slide the button to TX Mode.

3. Press and hold the power button for 3 seconds, the light flashing red and blue when pairing, the light turn to solid blue when paired.
   Connect to the 2nd Headphones:
   

4. After connecting the 1st device, double-click to enter the pairing mode(the light flashes red and blue alternately), and the light turns solid blue when connected.

BA010 will automatically reconnect to the last device within 10s. If fails, please clear both the Bluetooth history of your Bluetooth devices and BA010, then repeat the pairing steps.

How To Use by Receiver (RX) Mode

Connect to Smart Phone/Tablet:

1. Connect your device and BA010 with a 3.5mm connector. (“Wired Speaker: 3,5mm connector+ RCA connector)
2. Slide the button to RX Mode..
3. Press and hold the power button for 3 seconds, the light flashing red and blue when pairing
4. Find “AD-BA010” on your device’s Bluetooth search result, tap it, (The light turn to solid blue when paired)
   “Please keep your device and the adapter as close as possible.
   “Make sure turn off other Bluetooth devices.

LED Indicator

Notes

• Please charging the adapter for at least 2 hours before using it for the first time.
• Please place your devices and the adapter within 1 meter.
• Please turn off other Bluetooth devices that you do not want to connect while pairing.
•  Available use the adapter while charging.
• Available to connect 2 Bluetooth devices by 1 adapter.
• Available to remember two recently paired devices and will attempt to pair with them automatically when power on.

Trouble Shooting

Fails to Pair:

Clear paired history:
Step 1: Turn off the adapter.
Step 2: Press and hold the power button for 7 seconds until the red and blue light both on and flash twice. Step 3: Turn on the adpter again to pair.

• Please clear the Bluetooth history of BA010 and your Bluetooth devices before pairing.

Reset:
Step 1 : Turn on the adapter.
Step 2: Press and hold the power button and charge at the same time.
Step 3: Turn on the adpter again to pair.

Paired but No Sound:

1. Please make sure you plug the connector into audio OUTPUT interface.
2.  Check your TV setting, change audio output setting to “VARIABLE”. Set TV’s internal speakers to “OFF”. “Exact menu and item names may vary between TVs.

FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2.  This device must withstand any interference received including interference that may cause undesired operation.

Warranty and Service
This product is covered with Aisidra product and labor warranty for 12 months from the date of its original purchase. Any questions welcome to contact us:
[email protected]

Extend 2-years warranty:
www.warranty-hub.com

Documents / Resources

| Aisidra AD-BA010 Bluetooth Transmitter Receiver V5.0 Bluetooth Adapter [pdf] User Manual
AD-BA010 Bluetooth Transmitter Receiver V5.0 Bluetooth Adapter, AD-BA010, Bluetooth Transmitter Receiver V5.0 Bluetooth Adapter, Receiver V5.0 Bluetooth Adapter, V5.0 Bluetooth Adapter, Bluetooth Adapter
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>