PROLiGHTS Astra Hybrid330IP Ultra Compact Hybrid Moving Beam Spot User Manual
- June 1, 2024
- PROLIGHTS
Table of Contents
Astra Hybrid330IP Ultra Compact Hybrid Moving Beam Spot
“`html
Product Information
Specifications:
- Product Name: Astra Hybrid330IP
- Model: Hybrid moving beam-spot
- Light Source: 330W LED
- Protection Rating: IP65
Product Usage Instructions
1 – Packaging
Package Content: The package includes the Astra
Hybrid330IP unit.
Optional Accessories: Optional accessories are
available for separate purchase.
2 – Technical Drawing
Refer to the technical drawing provided in the user manual for
detailed dimensions and layout of the product.
3 – Pan and Tilt Lock
Ensure to unlock the pan and tilt mechanism before adjusting the
position of the light fixture.
FAQ
Q: How do I clean the product?
A: Refer to section 19 of the user manual for
instructions on periodic cleaning of the fixture.
Q: How to update the product?
A: Section 22 details the process for updating
the fixture using USB update mode.
“`
Astra Hybrid330IP
IP65 Ultra compact hybrid moving beam-spot, with a 330W LED Source
USER MANUAL
Rev.01 – 01/24
English version
Thank you for choosing PROLIGHTS
Please note that every PROLIGHTS product has been designed in Italy to meet
quality and performance requirements for professionals and designed and
manufactured for the use and application as shown in this document. Any other
use, if not expressly indicated, could compromise the good condition/operation
of the product and/or be a source of danger. This product is meant for
professional use. Therefore, commercial use of this equipment is subject to
the respectively applicable national accident prevention rules and
regulations. Features, specifications and appearance are subject to change
without notice. Music & Lights S.r.l. and all affiliated companies disclaim
liability for any injury, damage, direct or indirect loss, consequential or
economic loss or any other loss occasioned by the use of, inability to use or
reliance on the information contained in this document. Product user manual
can be downloaded from the website www.prolights.it , or can be inquired to
the official PROLIGHTS distributors of your territory
(https://www.prolights.it/sales_network.html). Scanning the below QR Code, you
will access the download area of the product page, where you can find a broad
set of always updated technical documentation: specifications, user manual,
technical drawings, photometrics, personalities, fixture firmware updates.
Visit the download area of the product page
The PROLIGHTS Logo, PROLIGHTS names and all other trademark in this document
pertaining to PROLIGHTS services or PROLIGHTS product are trademarks OWNED or
licensed by Music & Lights S.r.l., its affiliates, and subsidiaries. PROLIGHTS
is a registered trademark by Music & Lights S.r.l. All right reserved. Music &
Lights Via A. Olivetti, snc 04026 – Minturno (LT) ITALY.
INDEX
SAFETY INFORMATION
02
1 – PACKAGING
05
PACKAGE CONTENT ……………………………………………………………………………………….. 05
OPTIONAL ACCESSORIES………………………………………………………………………………… 05
2 – TECHNICAL DRAWING
05
3 – PAN AND TILT LOCK
06
4 – INSTALLATION
07
MOUNTING…………………………………………………………………………………………………….. 07
5 – CONNECTION TO THE MAINS SUPPLY
08
6 – START UP
08
CONNECT AND DISCONNECT POWER FROM THE PRODUCT……………………………. 08
7 – PRODUCT OVERVIEW
09
8 – DMX CONNECTION
10
CONNECTION OF THE CONTROL SIGNAL: DMX LINE ………………………………………. 10
INSTRUCTIONS FOR A RELIABLE DMX CONNECTION ……………………………………….. 10
CONNECTION DAISY CHAIN……………………………………………………………………………. 10
CONNECTION OF THE DMX LINE…………………………………………………………………….. 10
CONSTRUCTION OF THE DMX TERMINATION ………………………………………………….. 11
DMX ADDRESSING ………………………………………………………………………………………….. 11
ETHERNET CONNECTION ……………………………………………………………………………….. 11
ETHERNET OPERATION …………………………………………………………………………………… 11
ETHERNET TO DMX OPERATIONS ……………………………………………………………………. 12
OPERATION AS A WIRELESS TRANSMITTER ………………………………………………………. 12
IN TO CRMX……………………………………………………………………………………………………. 12
OPERATION AS A WIRELESS RECEIVER……………………………………………………………… 13
CRMX TO DMX (RX) …………………………………………………………………………………………. 13
9 – CONTROL PANEL
14
DISPLAY AND BUTTONS LAYOUT……………………………………………………………………… 14
10 – MENU STRUCTURE
15
11 – SHORTCUT
21
12 – RDM FUNCTIONS
21
13 – DMX CHARTS
23
RDM Personality ID List …………………………………………………………………………………….. 23
RDM Model ID…………………………………………………………………………………………………. 23
14 – FIXED GOBOS WHEEL
32
15 – ROTATING GOBOS WHEEL
33
16 – COLOR WHEEL
34
17 – ANIMATION WHEEL
35
18 – ERROR MESSAGES
36
19 – PERIODICAL CLEANING
39
20 – GOBOS REPLACEMENT
40
21 – MODULE REMOVAL (ANIMATION, COLOR, GOBOS WHEEL)
41
22 – USB UPDATE MODE
42
UPDATE THIS FIXTURE……………………………………………………………………………………… 43
UPDATE LINKED FIXTURES – ALL FIXTURES ……………………………………………………….. 44
23 – MAINTENANCE
45
MAINTENANCE AND CLEANING THE PRODUCT……………………………………………….. 45
REPLACING THE FUSE……………………………………………………………………………………… 45
VISUAL CHECK OF PRODUCT HOUSING …………………………………………………………… 45
RESETTING THE MAINTENANCE TIME MESSAGE ……………………………………………… 46
24 – TEST OF IP65 RATING
47
PROLIGHTS – Astra Hybrid330IP
01
SAFETY INFORMATION
WARNING! · See https://www.prolights.it/product/ASTRAHYB330IP#download for
installation instruc-
tions. · Please read carefully the instruction reported in this section before
installing, power-
ing, operating or servicing the product and observe the indications also for
its future handling.
This unit is not for household and residential use, only professional
applications.
Connection to mains supply · The Connection to the mains supply must be
carried out by a qualified electrical installer. · Use only AC supplies
100-240V 50-60 Hz, the fixture must be electrically connected
to ground (earth). · Select the cable cross section in according with the
maximum current draw of the
product and the possible number of products connected at the same power line.
· The AC mains power distribution circuit must be equipped with
magnetic+residual
current circuit breaker protection. · Do not connect it to a dimmer system;
doing so may damage the product.
Protection and Warning against electrical shock · Do not remove any cover from
the product, always disconnect the product from AC
power before servicing. · Ensure that the fixture is electrically connected to
ground (earth). And use only a
source of AC power that complies with local building and electrical codes and
has both overload and ground-fault (earth-fault) protection. · Before using
the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected
devices. · Isolate the fixture from power immediately if the power plug or any
seal, cover, cable, or other components are damaged, defective, deformed or
showing signs of overheating. · Do not reapply power until repairs have been
completed. · Refer any service operation not described in this manual to
PROLIGHTS Service team or an authorized PROLIGHTS service center.
Installation · Make sure that all visible parts of the product are in good
visible condition before its
use or installation. · Make sure the point of anchorage is stable before
positioning the projector. · When suspending the fixture above ground level,
secure it against failure of primary
attachments by attaching a safety cable that is approved as a safety
attachment for the weight of the fixture to the attachment point on the main
frame of the product. ln case the safety cable, enter in action, it needs to
be replaced with a new one. · Install the product only in well ventilated
places. · For non temporary installations, ensure that the fixture is securely
fastened to a loadbearing surface with suitable corrosionresistant hardware. ·
For a temporary installation with clamps, ensure that the quarter-turn
fastener and/or screws are turned fully, and secured with a suitable safety
cable.
Minimum distance of illuminated objects
1,5 m
· The projector needs to be positioned so that the objects hit by the beam of
light are at least 1,5 meters (4,92 ft) from the lens of the projector.
02
PROLIGHTS – Astra Hybrid330IP
Ta 45°C Ta -15°C
IP65
Tc 63°C
Max operating ambient temperature (Ta) · Do not operate the fixture if the
ambient temperature (Ta) exceeds 45 °C (113 °F).
Minimum operating ambient temperature (Ta) · Do not operate the fixture if the
ambient temperature (Ta) is below -15 °C (5 °F).
Protection from burns and fire · The exterior of the fixture becomes hot
during use. Avoid contact by persons and materials. · Ensure that there is
free and unobstructed airflow around the fixture. · Keep flammable materials
well away from the fixture · Do not expose the front glass to sunlight or any
other strong light source from any an-
gle. Lenses can focus the sun’s rays inside the fixture, creating a potential
fire hazard. · Do not attempt to bypass thermostatic switches or fuses.
Permanent Outdoor use · This product is rated with an IP (Ingress protection)
for permanent outdoor use when
used and serviced according to the instruction contained in this document. ·
Never use the fixture in places subject to vibrations or bumps. · Make certain
that no inflammable liquids, water or metal objects enter the fixture. ·
Excessive dust, smoke fluid, and particle build up degrades performance,
causes
overheating and will damage the fixture. · Damages caused by inadequate
cleaning or maintenance are not covered by the
product warranty.
Temperature of the external surface · The surface of the fixture can reach up
to 62,6 °C (144,7 °F) during operation. Avoid
contact with people and materials.
Radio receiver This product contains a radio receiver and/or transmitter: ·
Maximum output power: 17 dBm. · Frequency band: 2.4 GHz.
Maintenance · Warning! Disconnect the fixture from AC mains power and allow to
cool for at least
10 minutes before handling. · Only technicians who are authorized by PROLIGHTS
or Authorised service partners
are permitted to open the fixture. · Users may carry out external cleaning,
following the warnings and instructions pro-
vided, but any service operation not described in this manual must be referred
to a qualified service technician. · Important! Excessive dust, smoke fluid,
and particle build up degrades performance, causes overheating and will damage
the fixture. Damages caused by inadequate cleaning or maintenance is not
covered by the product warranty.
Photobiological safety · This device emits potentially dangerous optical
radiation and is identified in the cat-
egory of Risk Group 2 according to EN 62471.
Do not stare at the operating light source · Do not look directly at the LED
source during operation. It can be harmful to the eyes
and skin. · During Installation, operation and maintenance, be prepared for
the fixture to light
and move suddenly when connected to power. · The device should be positioned
so that prolonged staring into the luminaire at a
distance closer than 4.101 m (13,45 ft) is not expected.
PROLIGHTS – Astra Hybrid330IP
03
Minimun distance
Risk Group 2
Risk Group 1
0.2 m 0.7 ft
4,101 m 13,45 ft
Disposal · This product is supplied in compliance with European Directive
2012/19/EU Waste
Electrical and Electronic Equipment (WEEE). To preserve the environment please
dispose/ recycle this product at the end of its life according to the local
regulation.
The product contains a lithium ion battery
· Don’t throw the unit into the garbage at the end of its lifetime. · Make
sure to dispose according to your local ordinances and/or regulations, to
avoid
polluting the environment! · The packaging is recyclable and can be disposed.
The products to which this manual refers comply with:
· 2014/35/EU – Safety of electrical equipment supplied at low voltage (LVD). ·
2014/30/EU – Electromagnetic Compatibility (EMC). · 2011/65/EU – Restriction
of the use of certain hazardous substances (RoHS). · 2014/53/EU – Radio
Equipment Directive (RED).
Other approvals
04
PROLIGHTS – Astra Hybrid330IP
1 – PACKAGING
PACKAGE CONTENT · 1x ASTRAHYB330IP. · 1x 1,5 meters power cable (BARE END –
SEETRONIC IP65 power connector). · 2x OSIPPLUS: IP65 quick-lock omega bracket
compatible with IP65 moving heads, M12 hole. · User Manual.
OPTIONAL ACCESSORIES Check the updated accessories list, description and
informations of the product at the following link:
https://www.prolights.it/product/ASTRAHYB330IP#accessories
2 – TECHNICAL DRAWING
253 [10.0]
509 [20.1]
684 [26.9] 570 [22.5]
393 [15.5]
266 [10.5]
Weight: 25 kg – 55,11 lbs
PROLIGHTS – Astra Hybrid330IP
446 [17.6] Fig. 01
05
3 – PAN AND TILT LOCK
PAN Mechanism lock and release
LOCK UNLOCK
90°
90°
90°
90°
TILT Mechanism lock and release
LOCK UNLOCK
45°
45°
Fig. 02
06
PROLIGHTS – Astra Hybrid330IP
45° 45°
45° 45°
4 – INSTALLATION
MOUNTING Check that the supporting structure can safely bear the weight of all installed fixtures, clamps, cables, auxiliary equipment, etc. and complies with locally applicable regulations. When suspending the fixture above ground level, secure it against failure of primary attachments by attaching a safety wire that is approved as a safety attachment for the weight of the fixture to an anchor point on the product main frame. Do not use removable parts or weak anchors for secondary attachment. Warning! When clamping the fixture to a truss or other structure at any angle, use clamps of half-coupler type. Do not use any type of clamp that does not completely encircle the structure when fastened.
C6002B clamp
RSR0670B Steel security cable
OSIPPLUS
108 [4.2]
108 [4.2] PROLIGHTS – Astra Hybrid330IP
Fig.03
07
5 – CONNECTION TO THE MAINS SUPPLY
WARNING: For protection from electric shock, the fixture must be earthed! The
product is equipped with auto-switching power supply that automatically
adjusts to any 50-60Hz AC power source from 100-240 Volts (max absolutes range
: 90- 264V). If you need to install a power plug on the power cable to allow
connection to power outlets, install a grounding-type (earthed) plug,
following the plug manufacturer’s instructions. If you have any doubts about
proper installation, consult a qualified electrician. The max power
consumption is 517W.
Core (EU) Brown Blue
Yellow+green
Core (US) Black White Green
Connection Live
Neutral Earth
Plug terminal marking L N
6 – START UP
CONNECT AND DISCONNECT POWER FROM THE PRODUCT To apply and disconnect power to
the product: · Check that the product is installed and secured as indicated in
the Safety Informations, and that
personal safety will not be put at risk when the fixture lights up. · Connect
the power connector into the Mains input socket (100-240 VAC-50/60 Hz). · The
product is then ready for its operations and can be controlled through the
available input sig-
nals on board. · To disconnect power from the product, disconnect the Mains
from the socket.
08
PROLIGHTS – Astra Hybrid330IP
7 – PRODUCT OVERVIEW
1. USER INTERFACE with display and buttons for access to the control panel
functions. 2. PAN Mechanism lock and release. 3. TILT Mechanism lock and
release. 4. SAFETY EYES to attach safety cable. 5. USB PORT for quick firmware
upgrade. 6. ETHERCON CONNECTORS IN / OUT signal. 7. POWER OUT: power output
for connection of multiple units in series. 8. POWER IN: for connection to the
Mains 100-240V~/50-60Hz. 9. ANTENNA of Wireless DMX Receiver internal module.
10.GORE VALVE 11.DMX IN/OUT (5-p XLR): 1 = GND, 2 = sign-, 3 = sign+, 4 N/C, 5
N/C.
4
1
2
3
5 67 8
9 10
11
PROLIGHTS – Astra Hybrid330IP
Fig 04
09
8 – DMX CONNECTION
CONNECTION OF THE CONTROL SIGNAL: DMX LINE The product has XLR sockets for DMX input and output. The default pin-out on both socket is as the following diagram:
DMX – INPUT XLR plug
Pin1 : GND – Shield Pin2 : – Signal Pin3 : + Signal Pin4 : N/C Pin5 : N/C
DMX – OUTPUT XLR socket
Fig. 05
INSTRUCTIONS FOR A RELIABLE DMX CONNECTION Use shielded twisted-pair cable
designed for RS-485 devices: standard microphone cable cannot transmit control
data reliably over long runs. 24 AWG cable is suitable for runs up to 300
meters (1000 ft). Heavier gauge cable and/or an amplifier is recommended for
longer runs. To split the data link into branches, use splitter-amplifiers in
the connection line. Do not overload the link. Up to 32 devices may be
connected on a serial link.
CONNECTION DAISY CHAIN Connect the DMX data output from the DMX source to the
product DMX input (male connector XLR)
socket. Run the data link from the product XLR output (female connector XLR)
socket to the DMX input of the next fixture.
Terminate the data link by connecting a 120 Ohm signal termination. If a
splitter is used, terminate
each branch of the link. Install a DMX termination plug on the last fixture on
the link.
CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use
shielded pair-twisted cables with 120 im-
pedance and low capacity.
The following diagram shows the connection mode:
DMX Address: 1
DMX Address: 30
DMX Address: 59
DMX Address: 88
DMX IN DMX OUT
DMX IN DMX OUT
DMX IN DMX OUT
DMX IN DMX OUT
. . . . . . . . . . . . . . . . . . . . . . . .
DMX512 Controller
Fig. 06 – Example 29 DMX channels configuration
10
PROLIGHTS – Astra Hybrid330IP
CONSTRUCTION OF THE DMX TERMINATION The termination is prepared by soldering a 120 1/4 W resistor between pins 2 and 3 of the male XLR connector, as shown in figure.
4
Example: 5 pin XLR connector
Fig. 07
DMX ADDRESSING In order to start controlling the product via DMX, the first
step is to select a DMX address, also known as the start channel, this is the
first channel used to receive instructions from a DMX controller. If you wish
to control the product individually, it is necessary to assign a different
starting address channel to each fixture. The number of channels occupied from
the product depends on the DMX mode selected, so always verify the DMX Mode in
the MENU before start addressing. If you assign two fixtures the same address,
they will be executing the same behaviour. Selecting the same address to
multiple fixtures can be useful for diagnostic purposes and symmetrical
control. DMX addressing is limited to make it impossible to set the DMX
address so high that you are left without enough control channels for the
product. To set the fixture’s DMX address: 1. Press ENTER to open the main
menu. 2. Reach the addressing menu, then select the DMX ADDRESS settings. 3.
Select the address from 1 to 512 using the navigation arrows/buttons and
confirm by pressing
ENTER. 4. Press Menu to exit and return to the Home screen.
ETHERNET CONNECTION The products is provided with two 8-pin RJ-45 sockets for
Ethernet input/output for a simple daisy
chain connection to the network.
The product can be controlled with ArtNet/sACN/Klingnet communication
protocol. Use a network cable category 5 (with four “twisted” wire pairs) and
standard RJ-45 plugs.
ETHERNET OPERATION Please refer to the section MENU STRUCTURE contained in
this document for detailed informations about the parameters of setting on the
fixture (Protocol, Net, Subnet, Universe, Start Channel and IP Address,
Ethernet to DMX No/Yes).
· IP addresses recommended: 002.xxx.xxx.xxx or 010.xxx.xxx.xxx. · The submask
net is fixed at 255.0.0.0.
PROLIGHTS – Astra Hybrid330IP
11
ETHERNET TO DMX OPERATIONS Please refer to the section MENU STRUCTURE
contained in this document for detailed informations This function allow a
product receiving an ethernet signal protocol to re-transmit the incoming
signal onto a wired DMX line through its onboard XLR-out connector.
· An Ethernet protocol (Artnet, sACN or others available) has to be enabled
from Ethernet menu at first fixture. Please make sure that wireless receiver
is switched to OFF if you use Ethernet
comunication. · Enable the option Ethernet To DMX choosing which fixture needs
to be retransmitted (Main Fixture
or Pixel Engine) from the Ethernet menu at the first product (connected to the
Ethernet) in the signal chain, next products have standard DMX setting. ·
Connect the Ethernet input of the first product in the data chain with the
network. Connect the DMX output of this product with the input of the next
product until all products are connected to the DMX chain. · Caution: At the
last product, the DMX chain has to be terminated with a terminator. Solder a
120 resistor between Signal () and Signal (+) into a XLR-plug and connect it
in the DMX-output of the
last product.
OPERATION AS A WIRELESS TRANSMITTER ASTRAHYB330IP can be used as wireless
transmitter to transmit DMX signal to different wireless receivers. To use
ASTRAHYB330IP as wireless transmitter, please follow the procedure below: 1.
Push ENTER button untill you show CONNECT on display, then press ENTER button
to confirm. 2. Use UP/DOWN buttons for select WIRELESS, then press ENTER to
confirm. 3. Push ENTER button on CRMX ON/OFF function and enable it to ON. 4.
Select CRMX mode and set it on Transmitter (please note that CRMX mode will be
available only if
CRMX ON/OFF is set to ON). 5. Ensure that the receiver units are not connected
to any other transmitter. Please refer to “Reset the
receiver” paragraph. 6. Enable TX LINK to ON to link transmitter to receivers
(please note that TX LINK will be available only
if CRMX mode is set to Transmitter). · The transmitter scans for all unlinked
receivers for a period of about 5 seconds. · If the connection fails, check
the position of the receiver. · The wireless icon on the receiver display
indicates the received signal strength.
Unlinking the transmitter Follow the procedure below to unlink the transmitter
from all receivers connected with the unit. 1. Push ENTER button untill you
show CONNECT on display, then press ENTER button to confirm. 2. Use UP/DOWN
buttons for select Wireless, then press ENTER to confirm. 3. Enable TX UNLINK
to ON 8 (please note that TX UNLINK will be available only if CRMX mode is
set to Transmitter). · All connected receivers will be unlinked.
IN TO CRMX This function enable or disable the transmission throught wireless
of the DMX signal from the transmit-
ter side to the receiver. Any incoming signal (ArtNet, sACN or DMX) is
retransmitted throught wireless. It’s possible to choose retransmission of
Main Fixture or Pixel Engine. If the ASTRAHYB330IP protocol selected is ArtNet
/ sACN, the CRMX module will retransmit the DMX values contained in the ArtNet
/ sACN signal received from the ASTRAHYB330IP.
NOTE: Artnet and sACN have higher priority on DMX if they are connected to transmitter. NOTE: Do not use IN TO CRMX and ETH TO DMX simultaneously, this will cause data conflict on DMX output signal.
12
PROLIGHTS – Astra Hybrid330IP
OPERATION AS A WIRELESS RECEIVER ASTRAHYB330IP can be used as wireless
receiver connected to a wireless transmitter. To use ASTRAHYB330IP as wireless
receiver, please follow the procedure below: 1. Push ENTER button untill you
show CONNECT on display, then press ENTER button to confirm. 2. Use UP/DOWN
buttons for select Wireless, then press ENTER to confirm. 3. Push ENTER button
on CRMX ON/OFF function and enable it to ON. 4. Select CRMX mode and set it on
Receiver (please note that CRMX mode will be available only if
CRMX ON/OFF is set to ON). 5. Enable RX RESET to ON to reset the receiver
(please note that RX RESET will be available only if
CRMX mode is set to Receiver). 6. On the transmitter, enable TX LINK to ON to
link transmitter to the receivers. 7. If the connection is successful and DMX
input is available the display the display on the receiver unit
will shows the DMX address. If DMX signal is not available, the display will
shows “No signal” but keeps the transmitter linked. 8. If the connection
fails, check the position of the receiver. 9. The wireless icon on the
receiver display indicates the received signal strength.
Reset the receiver Follow the procedure below to reset the receiver. 1. Push
MENU button untill you show CONNECT on display, then press ENTER button to
confirm. 2. Use UP/DOWN buttons for select Wireless, then press ENTER to
confirm. 3. Enable RX RESET to ON. · The wireless icon on the receiver display
indicates the received signal strength.
CRMX TO DMX (RX) This function enable or disable the retransmission of the
wireless DMX signal received throught the DMX port on the receiver side.
PROLIGHTS – Astra Hybrid330IP
13
9 – CONTROL PANEL
The product has a display and buttons for access to the control panel
functions.
Fig. 08
DISPLAY AND BUTTONS LAYOUT The product has a display and buttons for access to the control panel functions:
1
1
2
4
5
23
· Browse upwards through the menu list and increases the numeric value
displayed.
· Scroll from left to right when entering numerical values, switching between
hundreds, tens and units
· Browse downwards through the menu list and decreases the numeric value
displayed.
· Return to the top level, or scroll from right to left
4
when entering numerical values, switching between
3
units, tens and hundreds
· Used to confirm the displayed value, or activate the
5
displayed function or to access the menu tree or to
return a previous menu window.
· Switch on the display using backup battery. Hold for 5s. · Switch off
display by pressing button 4 for 5s while on being on
Home screen.
· LED indicator for Wireless dmx (color red and green).
· LED indicator for Ethernet network.(color orange).
· USB port for Firmware Upgrade.
14
PROLIGHTS – Astra Hybrid330IP
10 – MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD indicates the default settings.
N° MENU 1 CONNECT
LEVEL 1 ADDRESS
DMX MODE WIRELESS
LEVEL 2 DMX W-DMX sACN ARTNET STANDARD CRMX ON/OFF
CRMX MODE
TX LINK TX UNLINK
RX RESET IN TO CRMX (TX) CRMX TO DMX (RX) LINKING KEY
LEVEL 3
VALUE (1-512)
ON OFF TX CRMX TX G4S TX G3 RX ON OFF ON OFF ON OFF ON OFF ON OFF
UNIVERSE METADATA
DESCRIPTION Set address used for Fixture and for Pixel patch.
Set DMX chart for Main Fixture. Enable/Disable the wireless card.
Allows to choose whether to set the wireless on the Transmitter or Receiver.
CRMX mode is unlocked only if CRMX ON / OFF is ON.
TX link unlock when the unit is set as a transmitter.
Disconnect the transmitter from all receivers. TX unlink unlocks only if CRMX
mode is on transmitter. Total reset of the receiver. RX reset unlocks only if
CRMX mode is receiver. Enable/Disable the transmission of the DMX values via
CRMX.
Enable/Disable the retransmission of the DMX from the receiver to the other
units connected by cable to the receiver itself. When In RX Mode: 1. Insert 8
digit code 2. Ask for mode (CRMX or CRMX²) 3. Ask for universe (CRMX: A,C,E,G
| CRMX²: A,B,C,D,E,F,G,H) When in TX CRMX Mode: 1. Insert 8 digit code In RX
Mode: 1. RGB Color code received from TX 2. Universe name received from TX In
TX CRMX Mode: 1.RGB Color code set from R,G,B combo list 2. Universe name by
default takes first 16 characters of Model Name. (DEVICELABEL-Last 4 digit of
RDM UID)
PROLIGHTS – Astra Hybrid330IP
15
N° MENU 1 CONNECT
LEVEL 1
ETHERNET SETTING
LEVEL 2 ARTNET SETTINGS
sACN SETTINGS
2 SETUP
ETHERNET TO DMX
SCREEN
BACKLIGHT
FLIP DISPLAY
KEY LOCK
MOVEMENT
PAN REVERSE
TILT REVERSE
PAN/TILT FEEDBACK
MOVEMENT BLACKOUT PAN/TILT MODE
HOME POSITION
LEVEL 3 IP ADDRESS
NET SUBNET
UNIVERSE
IP ADDRESS
UNIVERSE
MERGE MODE ON
OFF/ HTP/ LTP
OFF
ON
10s
20s
30s
ON/OFF/AUTO
OFF
AUTO
ON/OFF
ON OFF ON OFF ON OFF ON OFF SLOW MEDIUM FAST STANDARD CUSTOM
DESCRIPTION Set IP address of the fixture. Set Net for ArtNet protocol
(Default 0). Set Subnet for ArtNet protocol (Default 0). Set Universe for
ArtNet protocol (Default 0). Set IP address of the fixture. Set Universe for
sACN protocol (Default 0). Set Merge Mode for sACN protocol.
Enable / Disable DMX retrasmission from sACN/ArtNet signal to DMX out port.
Allows you to select the timing after that display will switch automatically
off when unactive.
Allows you to rotate the display by 180°.
Allows you lock the buttons on the control panel by a password. Press
following combinations (password) in order to access to the user menu : UP,
DOWN, UP, DOWN. Allows you to reverse Pan movement.
Allows you to reverse Tilt movement.
To activate / deactivate the reading of the feedbacks given by the encoders.
Make fixture goes blackout OFF while moving. To choose the horizontal/
vertical movement speed. SYNC mode will sync movement speed with the whole
ASTRAWASH familiy fixtures. Standard: Pan is at 90° to the display when
Pan@128dmx value like all Prolights fixtures. Custom: Pan is at 0° to the
display when Pan@128dmx value.
16
PROLIGHTS – Astra Hybrid330IP
N° MENU 2 SETUP
LEVEL 1
FIXTURE SETTINGS
LEVEL 2 CUSTOM P DEGREE
CUSTOM T DEGREE
FAN MODE COLOR WHEEL BLACKOUT COLOR WHEEL BLACKOUT COLOR WHEEL MODE GOBO WHEEL
BLACKOUT GOBO WHEEL MODE DMX FAULT STATUS LED DIMMER CURVE
LEVEL 3 0° 45° 90° 135° 180° 225° 270° 315° 0% 12.5% 25% 50% 75% 87.5% 100% AUTO SILENT HIGH ON OFF ON OFF STEP COUNTINUOUS ON OFF STEP COUNTINUOUS HOLD BLACKOUT ON OFF LINEAR/ S-CURVE SQUARE LAW INVERSE SQUARE LAW
DESCRIPTION To choose pan values in case of Custom position.
To choose tilt values in case of Custom position.
Select Fan behaviour.
To set Gobo Wheel Movement in blackout mode. To set Gobo Wheel Movement in
blackout mode. To set Color Wheel Movement scrolling mode. To set Gobo Wheel
Movement scrolling mode. To set Gobo Wheel Movement scrolling mode. To choose
the behaviour of fixture in case of dmx signal lost. To turn the status LEDs
on the front panel on or off. Select different curve behaviour of dimmer.
PROLIGHTS – Astra Hybrid330IP
17
N° MENU 2 SETUP
LEVEL 1
LEVEL 2 DIMMER SPEED
LED FREQUENCY
INVERT ZOOM TRANSFER CONFIGURATION
3 ADVANCED
RESET
ALL PAN & TILT
PAN
TILT
COLOR1
COLOR2
COLOR3 ROT GOBO
GOBO ROT
FIXED GOBO
ZOOM
FOCUS
ANIMATION
8F PRISM
6F PRISM
FROST
CALIBRATION
OTHERS PASSWORD
PAN
TILT DIMMER
COLOR1
COLOR2
COLOR3
LEVEL 3 AUTO FAST MEDIUM
DESCRIPTION Linear dimmer behaviour. Dimmer curve adding long fade. Dimmer curve adding medium fade. Dimmer curve adding little fade.
SLOW 600 HZ
4000 HZ Select PWM frequency.
1200 HZ 6000 HZ
2000 HZ 25 KHZ
50 KHZ ON
Invert zoom values.
OFF
WITHOUT DMX ADDRESS
WITH DMX ADDRESS
To transfer the same menu settings of one fixtures to all the other in the daisy chain, including or not the dmx address. To reset these functions.
To calibrate these functions.
18
PROLIGHTS – Astra Hybrid330IP
N° MENU 3 ADVANCED
LEVEL 1
MANUAL CONTROL
LEVEL 2 ROT GOBO FIXED GOBO 8F PRISM 6F PRISM 8F PRISM ROT 6F PRISM ROT FROST FOCUS ZOOM ANIMATION ANIMATION ROT GOBO 1 … GOBO 8 FIXGOBO 1 … FIXGOBO 11 ANIMATION FOCUS GOBO 1 … GOBO 8 CYAN MAGENTA YELLOW CONTROL PAN PAN FINE TILT TILT FINE DIMMER DIMMER FINE SHUTTER CYAN MAGENTA YELLOW COLOR1 COLOR2 COLOR3 ROT GOBO GOBO ROT GOBO ROT FINE
LEVEL 3
FOCUS FOCUS FOCUS FOCUS INDEX INDEX
DESCRIPTION For manual control of the unit.
PROLIGHTS – Astra Hybrid330IP
19
N° MENU 3 ADVANCED
LEVEL 1
RELOAD DEFAULT
LEVEL 2 FIXED GOBO 8F PRISM 8F PRISM ROT 6F PRISM 6F PRISM ROT FROST ZOOM ZOOM
FINE FOCUS FOCUS FINE ANIMATION ANIMATION ROT BASIC RELOAD
FACTORY RELOAD
LEVEL 3
YES/NO YES/NO
4 INFORMATION FIXTURE TIME FIXTURE HOURS CURRENT HOURS SOURCE HOURS POWER ON CYCLE MAINTENANCE TIME
TOTAL PARTIAL TOTAL PARTIAL TOTAL PARTIAL TOTAL PARTIAL ELAPSED TIME ALERT PERIOD
TEMPERATURE
FAN SPEED
WIRELESS QUALITY CHANNEL VALUE ERROR MESSAGE FIXTURE MODEL RDM UID SOFTWARE
VERSION CRMX MODULE VERSION
NEAR SOURCE TEMP, DRIVER PCB TEMP, LED PCB TEMP,… NEAR SOURCE FAN, BASE FAN,…
PAN… PAN, TILT… XXXXXXXXXX (READ) 1U01 V1.0.00… TimoFX: Vx.x.xx
DESCRIPTION
Default of all parameters excepted Calibration (both User and Factory) Default
of all parameters. User Calibration parameters need to be overwritten by
Factory calibration. Factory reload password: 050. To check the total working
hours of the unit. Reset password: 050. To check the current working hours of
the unit. Reset password: 050. To see the total operating hours of the LED
source. Reset password: 050. To see the power cycles of the machine. Reset
password: 050. To choose and reset unit maintenance warning hours (Default:
500). Deafult: 500. Reset password: 050. To see the unit temperature. To see
the speed of the fans. To check the wireless quality. To see the dmx value of
those channels. To see any error messages. View informations about fixture
model. View ID for the RDM control. View informations about software version.
20
PROLIGHTS – Astra Hybrid330IP
11 – SHORTCUT
Keys UP + DOWN after power on
DOWN then power on
ENTER + UP then power on
Mode
Flip Display
Reset without pan/tilt movements Bootloader
Description
Directly flip display without enter inside menu
Fixture will be powered on without reset on pan/tilt movements
Force firmware upgrade
12 – RDM FUNCTIONS
The product can communicate using RDM (Remote Device Management) protocol over
a DMX512 Networks. RDM is a bi-directional communications protocol for use in
DMX512 control systems, it is the open standard for DMX512 device
configuration and status monitoring. The RDM protocol allows data packets to
be inserted into a DMX512 data stream without affecting existing non-RDM
equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures. The PIDs in the following tables
are supported in the product. RDM is also available on Wireless. CRMX Tiny’s
Downstream must be enabled in its custom PIDs to work.
Category Product Information
DMX512 Setup
Sensors
Parameter
DEVICE_INFO PRODUCT_DETAIL_ID_LIST DEVICE_MODEL_DESCRIPTION MANUFACTURER_LABEL
DEVICE_LABEL FACTORY_DEFAULTS SOFTWARE_VERSION_LABEL BOOT_SOFTWARE_VERSION_ID
BOOT_SOFTWARE_VERSION_LABEL DMX_PERSONALITY DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS SLOT_INFO SLOT_DESCRIPTION DEFAULT_SLOT_VALUE
DMX_BLOCK_ADDRESS DMX_FAIL_MODE DMX_STARTUP_MODE SENSOR_DEFINITION
SENSOR_VALUE RECORD_SENSORS BURN_IN
Value GET
0x0060
x
0x0070
x
0x0080
x
0x0081
x
0x0082
x
0x0090
x
0x00C0
x
0x00C1
x
0x00C2
x
0x00E0
x
0x00E1
x
0x00F0
x
0x0120
x
0x0121
x
0x0122
x
0x0140
x
0x0141
x
0x0142
x
0x0200
x
0x0201
x
0x0202
0x0440
x
PROLIGHTS – Astra Hybrid330IP
SET
x x
x x
x x x x x x
21
Category
Parameter
Value GET
SET
DIMMER_INFO
0x0340
x
MINIMUM_LEVEL
0x0341
x
x
MAXIMUM_LEVEL
0x0342
x
x
CURVE
0x0343
x
x
Dimmer Settings CURVE_DESCRIPTION
0x0344
x
x
OUTPUT_RESPONSE_TIME
0x0345
x
x
OUTPUT_RESPONSETIME DESCRIPTION
0x0346
x
MODULATION_FREQUENCY
0x0347
x
x
MODULATIONFREQUENCY DESCRIPTION
0x0348
x
DEVICE_HOURS
0x0400
x
x
LAMP_HOURS
0x0401
x
x
Power/Lamp LAMP_STRIKES
0x0402
x
x
Settings
LAMP_STATE
0x0403
x
x
LAMP_ON_MODE
0x0404
x
x
DEVICE_POWER_CYCLES
0x0405
x
x
DISPLAY_INVERT Display Settings DISPLAY_LEVEL
0x0500
x
x
0x0501
x
x
PAN_INVERT
0x0600
x
x
TILT_INVERT
0x0601
x
x
PAN_TILT_SWAP
0x0602
x
x
Configuration REAL_TIME_CLOCK
0x0603
x
x
LOCK_PIN
0x0640
x
x
LOCK_STATE
0x0641
x
x
LOCK_STATE_DESCRIPTION
0x0642
x
IP & DNS
IPV4_CURRENT_ADDRESS
0x0705
x
Configuration IPV4_STATIC_ADDRESS
0x0706
x
x
IDENTIFY_DEVICE
0x1000
x
x
RESET_DEVICE
0x1001
x
POWER_STATE
0x1010
x
x
PERFORM_SELFTEST
0x1020
x
x
SELF_TEST_DESCRIPTION
0x1021
x
Control
CAPTURE_PRESET PRESET_PLAYBACK
0x1030
x
x
0x1031
x
x
IDENTIFY_MODE
0x1040
x
x
PRESET_INFO
0x1041
x
PRESET_STATUS
0x1042
x
x
PRESET_MERGEMODE
0x1043
x
x
POWER_ON_SELF_TEST
0x1044
x
x
Parameter HOME_POSITION
Manufacturer Specific PIDs PID GET SET Value
Description
0x8160 x x
0-1
0: Standard 1: Custom
22
PROLIGHTS – Astra Hybrid330IP
13 – DMX CHARTS
RDM Personality ID List
ID
DMX Mode
Footprint
1
STANDARD
29
RDM Model ID 0xA025
Pan = 128 Tilt = 0
PAN/TILT VALUES Home position set to STANDARD
Pan = 128 Tilt = 128
Pan = 128 Tilt = 255
DMX 255
DMX 255
DMX 0
DMX 0
Pan = 0 Tilt = 80
Tilt movement range: 270° Pan movement range: 540
Pan = 128 Tilt = 80
Pan = 255 Tilt = 80
DMX 255
Display
DMX 255
Display
DMX 0
DMX 0
Display
Fig. 09
PROLIGHTS – Astra Hybrid330IP
23
Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
MODE
STANDARD Pan
Pan fine Tilt
Tilt fine Dimmer Dimmer Fine Shutter
Cyan Magenta
Yellow Color Wheel 1 Color Wheel 2 Color Wheel 3
Rot Gobo Gobo Rot Gobo Rot Fine Fixed Gobo
Prism 1 Prism 1 Rotation
Prism 2 Prism 2 Rotation
Frost Zoom Zoom Fine Focus Focus Fine Animation Insertion Animation Rotation
Control
24
PROLIGHTS – Astra Hybrid330IP
Channel STANDARD
1 2 3 4 5
6
Name
Pan Pan fine
Tilt Tilt fine Dimmer Dimmer
Fine
7
Shutter
8
Cyan
9
Magenta
10
Yellow
11
Color Wheel 1
Function
Lineary from 0% to 100% Lineary from 0% to 100% Lineary from 0% to 100%
Lineary from 0% to 100% Lineary from close to open
Lineary from close to open
Close Strobe from slow to fast
Open Pulse in from slow to fast
Open Pulse out from slow to fast
Open Randon from slow to fast
Open Lineary from 0% to 100% Lineary from 0% to 100% Lineary from 0% to 100%
Indexed Open
Open + HIGH CRI >90 HIGH CRI >90
HIGH CRI >90 + CTO 3200K CTO 3200K
CTO 3200K + CTO 2400K CTO 2400K
CTO 2400K + CYAN CYAN
Forward Spin From fast to slow
Stop Stop Reverse Spin From slow to fast
Min DMX
0 0 0 0 0
Max DMX
Default
255 128
255 128
255 128
255 128
255 000
0 255 000
0
1
255
2
62
63 64
65 125
126 127
128 188
189 190
191 251
252 255
0 255 000
0 255 000
0 255 000
000
0
18
19 37
38 56
57 75
76 94
95 113
114 132
133 151
152 170
171 211
212 214
215 255
PROLIGHTS – Astra Hybrid330IP
25
Channel STANDARD
Name
12
Color Wheel 2
13
Color Wheel 3
Function
Indexed Open
Open + LAVANDER LAVANDER
LAVANDER + DARK BLUE DARK BLUE
DARK BLUE + DARK RED DARK RED
DARK RED + MAGENTA MAGENTA
Forward Spin From fast to slow
Stop Stop Reverse Spin From slow to fast Indexed Open Open + LIGHT GREEN LIGHT
GREEN LIGHT GREEN + PINK PINK PINK + LIGHT ORANGE LIGHT ORANGE LIGHT ORANGE +
YELLOW YELLOW Forward Spin From fast to slow Stop Stop Reverse Spin From slow
to fast
Min DMX
0 19 38 57 76 95 114 133 152
Max DMX
Default
000
18
37
56
75
94
113
132
151
170
171 211
212 214
215 255
000
0
18
19 37
38 56
57 75
76 94
95 113
114 132
133 151
152 170
171 211
212 214
215 255
26
PROLIGHTS – Astra Hybrid330IP
Channel STANDARD
Name
14
Rot Gobo
15
Gobo Rot
16
Gobo Rot Fine
Function
Indexed
Open GOBO 1 GOBO 2 GOBO 3 GOBO 4 GOBO 5 GOBO 6 GOBO 7 GOBO 8
Forward Spin
From fast to slow Stop Stop
Reverse Spin
From slow to fast
Shake GOBO 1 from slow to fast GOBO 2 from slow to fast GOBO 3 from slow to
fast GOBO 4 from slow to fast GOBO 5 from slow to fast GOBO 6 from slow to
fast GOBO 7 from slow to fast GOBO 8 from slow to fast
Indexed Lineary from 0° to 360°
Forward Spin
From fast to slow
Stop
Stop
Reverse Spin
From slow to fast
Lineary from 0° to 360° (Indexed)
Min DMX
0 10 20 30 40 50 60 70 80
Max DMX
Default
000
9
19
29
39
49
59
69
79
89
90 131
132 132
133 174
175 184 185 194 195 204 205 214 215 224 225 234 235 244 245 255
000 0 127
128 190
191 192
193 255 0 255 000
PROLIGHTS – Astra Hybrid330IP
27
Channel STANDARD
Name
17
Fixed Gobo
18
Prism 1
19
Prism 1 Rotation
20
Prism 2
Function
Indexed
Open GOBO 1 GOBO 2 GOBO 3 GOBO 4 GOBO 5 GOBO 6 GOBO 7 GOBO 8 GOBO 9 GOBO 10
GOBO 11
Forward Spin
From fast to slow
Stop
Stop
Reverse Spin
From slow to fast
Shake GOBO 1 from slow to fast GOBO 2 from slow to fast GOBO 3 from slow to
fast GOBO 4 from slow to fast GOBO 5 from slow to fast GOBO 6 from slow to
fast GOBO 7 from slow to fast GOBO 8 from slow to fast GOBO 9 from slow to
fast GOBO 10 from slow to fast GOBO 11 from slow to fast
Open Prism insert
Indexed Lineary from 0° to 360°
Forward Spin
From fast to slow
Stop
Stop
Reverse Spin
From slow to fast Open
Prism insert
Min DMX
0 6 12 18 24 30 36 42 48 54 60 66
Max DMX
Default
000
5
11
17
23
29
35
41
47
53
59
65
75
76 127
128 129
130 181
182 187 188 193 194 199 200 205 206 211 212 217 218 223 224 229 230 235 236
241 242 255
0 127 000 128 255
000 0 127
128 190
191 192
193 255 0 127 000
128 255
28
PROLIGHTS – Astra Hybrid330IP
Channel STANDARD
Name
21
Prism 2 Rotation
22
Frost
23
Zoom
24
Zoom Fine
25
Focus
26
Focus Fine
27
Animation Insertion
28
Animation Rotation
29
Control
Function
Indexed Lineary from 0° to 360°
Forward Spin
From fast to slow
Stop
Stop
Reverse Spin
From slow to fast
Continuous
Lineary from 0% to 100% Lineary from in to out Lineary from in to out Lineary
from in to out Lineary from in to out
Continuous
Lineary from 0% to 100%
Indexed Lineary from 0° to 360°
Forward Spin
From fast to slow
Stop
Stop
Reverse Spin
From slow to fast No Function/Safe PAN REVERSE ON PAN REVERSE OFF TILT REVERSE
ON TILT REVERSE OFF PAN/TILT MODE FAST PAN/TILT MODE MEDIUM PAN/TILT MODE SLOW
MOVEMENT IN BLACKOUT ON MOVEMENT IN BLACKOUT OFF COLOR WHEEL 1 BLACKOUT ON
(index) COLOR WHEEL 1 BLACKOUT OFF (index) COLOR WHEEL 2 BLACKOUT ON (index)
COLOR WHEEL 2 BLACKOUT OFF (index) COLOR WHEEL 3 BLACKOUT ON (index) COLOR
WHEEL 3 BLACKOUT OFF (index) ROTATING GOBO WHEEL BLACKOUT ON
(index) ROTATING GOBO WHEEL BLACKOUT OFF
(index) FIXED GOBO WHEEL BLACKOUT ON (index) FIXED GOBO WHEEL BLACKOUT OFF
(index) COLOR WHEEL 1 CONTINUOUS MOVEMENT
(index)
Min DMX
0
Max DMX
Default
000
127
128 190
191 192
193 255 000
0 255 0 255 000 0 255 000 0 255 000 0 255 000
000 0 255
000 0 127
128 190
191 192
193 255
0
1
000
2
3
4
5
6
7
8
9
10 11
12 13
14 15
16 17
18 19
20 21
22 23
24 25
26 27
28 29
30 31
32 33
34 35
36 37 38 39
40 41
PROLIGHTS – Astra Hybrid330IP
29
Channel STANDARD
Name
Function
COLOR WHEEL 1 STEP MOVEMENT (index) COLOR WHEEL 2 CONTINUOUS MOVEMENT
(index) COLOR WHEEL 2 STEP MOVEMENT (index) COLOR WHEEL 3 CONTINUOUS MOVEMENT
(index) COLOR WHEEL 3 STEP MOVEMENT (index) ROTATING GOBO WHEEL CONTINUOUS MO-
VEMENT (index) ROTATING GOBO WHEEL STEP MOVEMENT
(index) FIXED GOBO WHEEL CONTINUOUS MOVE-
MENT (index) FIXED GOBO WHEEL STEP MOVEMENT (index)
HOME MODE STANDARD HOME MODE CUSTOM DISPLAY ON DISPLAY 10S DISPLAY 20S DISPLAY
30S FLIP DISPLAY ON FLIP DISPLAY OFF FLIP DISPLAY AUTO KEY LOCK ON KEY LOCK
OFF FAN MODE AUTO FAN MODE SILENT FAN MODE HIGH
NO SIGNAL HOLD NO SIGNAL BLACKOUT
STATUS LED ON STATUS LED OFF DIMMER CURVE LINEAR DIMMER CURVE S-CURVE DIMMER
CURVE SQUARE LAW DIMMER CURVE INVERSE SQUARE LAW DIMMER SPEED AUTO DIMMER
SPEED FAST DIMMER SPEED MEDIUM DIMMER SPEED SLOW LED FREQUENCY 600HZ LED
FREQUENCY 1200HZ LED FREQUENCY 2000HZ LED FREQUENCY 4000HZ LED FREQUENCY
6000HZ LED FREQUENCY 25KHZ LED FREQUENCY 50KHZ INVERT ZOOM OFF
Min DMX
42
44
46
48
50
52
54
56
58 60 62 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106
108 110 112 114 116 118 120 122 124 126
Max DMX
Default
43
45
47
49
51
53
55
57
59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107
109 111 113 115 117 119 121 123 125 127
30
PROLIGHTS – Astra Hybrid330IP
Channel STANDARD
Name
Function
INVERT ZOOM ON RESET ALL
RESET PAN/TILT RESET PAN RESET TILT
RESET COLOR 1 RESET COLOR 2 RESET COLOR 3 RESET ROTATING GOBO RESET GOBO
ROTATION RESET FIXED GOBO
RESET ZOOM RESET FOCUS RESET ANIMATION RESET 6F PRISM RESET 8F PRISM RESET
FROST RESET OTHER
Reserved FACTORY DEFAULT OF CONTROL FUNCTIONS
Min DMX 128 130 132 134 136 138 140 142 144 146 148 150 152 154 156 158 160 162 164 254
Max DMX
Default
129
131
133
135
137
139
141
143
145
147
149
151
153
155
157
159
161
163
253
255
PROLIGHTS – Astra Hybrid330IP
31
14 – FIXED GOBOS WHEEL
Fig. 10
32
PROLIGHTS – Astra Hybrid330IP
15 – ROTATING GOBOS WHEEL
Gobo dimensions: · Type B · Ø external (OD)= 20 mm · Ø of image (ID)= 16 mm ·
Thinckness= up to 3 mm
ID = Ø16 mm [0.6 in]
OD = Ø20 mm [0.8 in]
Up to 3 mm [0.12 in]
ATTENTION! Load with mirror surface toward the light source.
PROLIGHTS – Astra Hybrid330IP
Fig. 10
33
16 – COLOR WHEEL
Fig. 11
34
PROLIGHTS – Astra Hybrid330IP
17 – ANIMATION WHEEL
PROLIGHTS – Astra Hybrid330IP
Fig. 12
35
18 – ERROR MESSAGES
The error is shown on the unit display. In the table below, the “ERROR SHOWED
ON SCREEN” column lists the possible errors, accompanied by a possible cause
(“POSSIBLE” CAUSES “column). The color of the error messages (listed in the
“COLOR MESSAGES” column) is different for each board it refers to (“PCB”
column). On page 39 you can see the location of the various pcb boards.
ERROR SHOWED ON SCREEN
POSSIBLE CAUSES
POSSIBLE PCB WITH ANOMALY
[POWER SUPPLY FAN ERROR]
Blower for cooling the power supply failed.
1U
[PAN/TILT PCB ERROR] Pan tilt pcb not detected.
2U
[PAN MOTOR ERROR]
This message will appear after the reset of the product if:
the PAN magnetic-indexing circuit detect a failure (sensor failed or magnet is missing).
or the stepping motor is defective.
2U
or its driving IC on the PCB is defective.
or the product is not located in the default position after the reset of the fixture.
[TILT MOTOR ERROR]
This message will appear after the reset of the product if:
the TILT magnetic-indexing circuit detect a failure (sensor failed or magnet is missing) .
or the stepping motor is defective.
2U
or its driving IC on the PCB is defective.
[PAN SENSOR ERROR]
or the product is not located in the default position after the reset of the fixture.
Pan sensor not detecteld.
2U
[TILT SENSOR ERROR] Tilt sensor not detecteld.
2U
[FAN PCB ERROR]
Fan PCB not detected.
3U
[LED TEMP. SENSOR ERROR] [LEFT AIR IN FAN ERROR] [LEFT AIR OUT FAN ERROR] [HEAD FAN ERROR]
LAMP sensor damaged (open or in short circuit).
3U
Air in blower for cooling the lamp failed, the lamp has been switched OFF.
3U
Air out blower for cooling the lamp failed, the lamp has been switched OFF.
3U
Air blower for cooling the head failed, the lamp has been switched OFF.
3U
36
PROLIGHTS – Astra Hybrid330IP
ERROR SHOWED ON SCREEN
POSSIBLE CAUSES
POSSIBLE PCB WITH ANOMALY
[MOTOR PCB 2 ERROR] Motor pcb 3U not detected.
2U – 3U
[MAGENTA ERROR] [YELLOW ERROR]
Failure detected during the reset of the Magenta flag, if
the Magenta flag of the CMY module is not located in its
4U
default position.
Failure detected during the reset of the Yellow flag, if the Yellow flag of the CMY module is not located in its default 4U position.
[CYAN ERROR]
Failure detected during the reset of the Cyan flag, if the
Cyan flag of the CMY module is not located in its default
4U
position.
[STATIC GOBO WHEEL ERROR]
Failure detected during the reset of the rotating gobo wheel, if this wheel is not located in the default position.
4U
[MOTOR PCB 3 ERROR] Motor pcb 4U not detected.
3U – 4U
[ROTATING GOBO WHEEL ERROR]
Failure detected during the reset of the rotating gobo wheel, if this wheel is not located in the default position.
5U
[GOBO ROTATION ERROR]
Failure detected during the reset of the rotation of the rotating gobo, if the rotating gobos are not located in the 5U default positions.
[ANIMATION WHEEL ERROR]
Failure detected during the reset of the animation wheel, if this wheel is not located in the default position.
5U
[ANIMATION WHEEL ROT. ERROR]
Failure detected during the reset of the rotation of the animation wheel, if this wheel is not located in the de- 5U fault position.
[MOTOR PCB 4 ERROR] Motor pcb 5U not detected.
4U – 5U
[FOCUS ERROR] [ZOOM ERROR]
Failure detected during the reset of the FOCUS, if the focus lens is not located in its default position.
6U
Failure detected during the reset of the ZOOM system, if the focus lens is not located in its default position.
6U
[6F PRISM ERROR]
Failure detected during the reset of the 6F effect prism, if this effect is not located in the default position.
6U
[6F PRISM ROTATION ERROR]
Failure detected during the reset of the 6F effect prism rotation, if this effect is not located in the default position.
6U
[8F PRISM ERROR]
Failure detected during the reset of the 8F effect prism, if this effect is not located in the default position.
6U
[8F PRISM ROTATION ERROR]
Failure detected during the reset of the 8F effect prism rotation, if this effect is not located in the default position.
6U
[FROST ERROR]
Failure detected during the reset of the effect FROST, if this effect is not located in the default position.
6U
[FRONT LEN FAN ERROR]
Air blower for cooling the front len failed, the lamp has been switched OFF.
6U
PROLIGHTS – Astra Hybrid330IP
37
IDENTIFICATION OF ELECTRONIC BOARDS
1U PCB
LED DRIVER
6U PCB 3U PCB
5U PCB
4U PCB 2U PCB
Fig. 13
38
PROLIGHTS – Astra Hybrid330IP
19 – PERIODICAL CLEANING
WARNING! Turn OFF power and allow approximately 20 minutes for the fixture to cool down.
1
3
Before removing rear cover, place the head in Use a soft cloth dampened with
any detergent a horizontal position and engage both the PAN liquid for
cleaning glass to remove the dirt and TILT locks for added stability. See the
“PAN from the reflectors, from the lenses and filters. AND TILT LOCK” paragrap
(pag. 6). Loosen and remove the marked screws and opening the head covers (1)
from both sides.
2
Safety cable
Unclip the safety cable on both sides (2).
PROLIGHTS – Astra Hybrid330IP
Fig. 14
39
20 – GOBOS REPLACEMENT
1
2
3
4
Open the head covers (see the “PERIODICAL CLEANING” paragraph, point 1). Gently remove the gobo holder from the gobo wheel (3, 4).
5
6
Remove the spring and the gobo (5, 6). NOTE: the mirrored part of the gobo must be placed in the direction of the LED Source
40
PROLIGHTS – Astra Hybrid330IP
Fig. 15
21 – MODULE REMOVAL (ANIMATION, COLOR, GOBOS WHEEL)
1
2
A B
C
A
To remove the Animation and Gobo wheels module, open the head covers (see section “PERIODIC CLEANING”) and proceed as follows: · Raise the zoom and focus plates (marked A in drawing 1); · Disconnect the two connectors, power and serial bus plugs (marked B in drawing 1); · Unscrew the two screws marked in the front view (marked C in drawing 1); · Pull out the plate with animation wheel and rotating gobo (marked A in drawing 2);
3
4
A AB
To remove the Colors and Fixed Gobo wheels module: · Disconnect the two connectors, power and serial bus plugs (marked A in drawing 3); · Unscrew the two screws marked in the front view (marked A in drawing 2); · Pull out the plate with colors wheels and rotating gobo (marked B in drawing 2).
PROLIGHTS – Astra Hybrid330IP
41
22 – USB UPDATE MODE
NOTE: It is necessary to prepare a FAT32-formatted flash drive for the update
and copy the prl files onto it. It is advisable to use a flash drive that is
empty and free of other files to facilitate the update. Several machines can
be upgraded simultaneously on the same DMX line. Necessarily there must be a
master machine to which you connect the drive and all other machines must be
connected to its output DMX line.
DMX OUT
USB Flash Drive
(MASTER)
DMX IN DMX OUT
DMX IN DMX OUT
DMX IN DMX OUT
. . . . . . . . . . . . . . . . . . . . . . . .
To update the device, proceed as follows:
1
SELECT UPDATE FILE
Path: FOLDER 1 FOLDER 2 FOLDER 3
BACK
NEXT
2
SELECT UPDATE FILE
Path: FOLDER 2 1U1.PRL 2U1.PRL 3U1.PRL 4U1.PRL 5U1.PRL 6U1.PRL
BACK
NEXT
· With the machine turned on, insert the USB drive; · A screen will appear
showing the files and folders on the USB stick, so use the UP and DOWN but-
tons to go to the directory with the update files and press ENTER (figure 1).
To return to the previous path press the LEFT button; · Select the files to be
updated. To select the desired files, move with the UP and DOWN buttons and
select the file by pressing ENTER (Figure 2); · The selected files will be
shown with a yellow square, select “NEXT” pressing RIGHT button, then press
ENTER to confirm. (Figure 2)
42
PROLIGHTS – Astra Hybrid330IP
UPDATE THIS FIXTURE 1
SELECT UPDATE
THIS FIXTURE LINKED FIXTURES ALL FIXTURES
2
SOFTWARE UPDATE SYSTEM
not turn off the power! usb ok
IC:01U01 V.x.x.xx.x
59%
BACK
START
· To update only the Master Fixture, press ENTER on “THIS FIXTURE”, a yellow
square will be shown, select “START” pressing RIGHT button, then press ENTER
to confirm. (Figure 1);
· A screen with the progress of the update will appear (Figure 2), once update
is completed the fixture will restart automatically and the update will be
completed.
PROLIGHTS – Astra Hybrid330IP
43
UPDATE LINKED FIXTURES – ALL FIXTURES It is possible to update several Prolights fixtures from the Astra and Jet series at the same time.
1
2
SELECT UPDATE
DO NOT POWER OFF
THIS FIXTURE LINKED FIXTURES ALL FIXTURES
Path: FOLDER 2
Progress:
1/x
100%
BACK
START
3
SENDING COMPLETED
1U1.PRL 2U1.PRL 3U1.PRL 4U1.PRL 5U1.PRL 6U1.PRL
FINISHED 4
PLEASE REMOVE USB TO EXIT
BACK
EXIT
· To update only the Linked Fixtures, press ENTER on “LINKED FIXTURES”, a
yellow square will be shown, select “START” pressing RIGHT button, then press
ENTER to confirm. (Figure 1);
· A screen will appear showing the progress of the update (Figure 2), once
update is completed press ENTER;
· A screen with the summary of the updates will appear (Figure 3), select
“EXIT” pressing RIGHT button to exit from the update menu; Select “BACK”
pressing LEFT button to return to the update menu; then press ENTER to confirm
your choice;
· Once you have selected EXIT (Figure 3), remove the USB drive as shown in the
last screen (Figure 4) and the update menu will close automatically.
NOTE: To update all fixtures (Master and Linked) the procedure is the same of
updating linked fixtures, once the progress of the update is completed, press
ENTER (Figure 2) and the update of the master fixture will start.
44
PROLIGHTS – Astra Hybrid330IP
23 – MAINTENANCE
MAINTENANCE AND CLEANING THE PRODUCT
WARNING: Disconnect from the mains before starting any maintenance work It is
recommended to clean the front at regular intervals, from impurities caused by
dust, smoke, or other particles to ensure that the light is radiated at
maximum brightness. · For cleaning, disconnect the main plug from the socket.
Use a soft, clean cloth moistened with a
mild detergent. Then carefully wipe the part dry. For cleaning other housing
parts use only a soft, clean cloth. Never use a liquid, it might penetrate the
unit and cause damage to it. · The user must clean the product periodically to
maintain optimum performance and cooling. The user may also upload firmware
(product software) to the fixture via the DMX signal input port or USB port
using firmware and instructions from PROLIGHTS. · The frequency of such
maintenance operations is to be performed according to various factors, such
as the amount of the use and the condition of the installation environment
(air humidity, presence of dust, salinity, etc.). It is recommended that the
product is subject to annual service by a qualified technician for special
maintenance involving at least the following procedures: · General cleaning of
internal parts. · For all the parts subject to friction, using lubricants
specifically supplied by PROLIGHTS. · General visual check of the internal
components, cabling, mechanical parts, etc. · Electrical, photometric and
functional checks; eventual repairs. · Cleaning the lenses. Only use neutral
soap and water to clean the lenses, then dry it carefully with a soft, non-
abrasive cloth. WARNING: the use of alcohol or any other detergent could
damage the lenses. · Only for IP65/IP66 projectors: It is recommended to
verify IP grade using IPTESTBOX every time the bodies are removed for
maintenance, this tool helps to double check the correct assembling of the
covers with a check of the IP grade of the fixture. · All other service
operations on the product must be carried out by PROLIGHTS, its approved
service agents or trained and qualified personnel. · It is PROLIGHTS policy to
apply the strictest possible calibration procedures and use the best quality
materials available to ensure optimum performance and the longest possible
component lifetimes. However, optical components are subject to wear and tear
over the life of the product, resulting in gradual changes in colours over
many thousands of hours of use. The extent of wear and tear depends heavily on
operating conditions and environment, so it is impossible to specify precisely
whether and to what extent performance will be affected. However, you may
eventually need to replace optical components if their characteristics are
affected by wear and tear after an extended period of use and if you require
fixtures to perform within very precise optical and colour parameters. · Do
not apply filters, lenses or other materials on lenses or other optical
components. Use only accessories approved by PROLIGHTS.
REPLACING THE FUSE WARNING: Before replacing the fuse, unplug the product from
the mains.
· Remove the old fuse from the housing with a suitable screwdriver
(anticlockwise) and replace it with one of the same type and of the same
classification (T8A 250V).
VISUAL CHECK OF PRODUCT HOUSING
· The parts of the product cover/housing should be checked for eventual
damages and breaking start at least every two months. In addition, especially
the parts of the front lens holder have to be checked mechanically (by means
of movement by the part) if it is firmly fastened to the fixture. If hint of a
crack is found on some plastic part, do not use the product until the damaged
part will be replaced.
· Cracks or another damages of the cover/housing parts can be caused by the
product transportation or manipulation and also ageing process may influence
materials.
· This checking is necessary for both fixed installations and preparing
product for renting. Any free moving parts inside of the product, cracked
cover/housing or any part of front lens not sitting properly in place need to
be immediately replaced.
PROLIGHTS – Astra Hybrid330IP
45
RESETTING THE MAINTENANCE TIME MESSAGE When the machine shows the message
“MAINTENANCE TIME” it means that the fixture needs an
overall check. once you have checked and cleaned the whole machine to reset
the message follow the
steps below: · enter the menu, go to INFORMATIONS and press Enter · go to
FIXTURE TIME and press Enter · finally go to MAINTENANCE TIME and press Enter
· Press enter again and enter the password 050 to reset the message.
Problems
Possible causes
Checks and remedies
Product doesn’t power ON · No power to the · Check that power is switched ON and cables are
product
plugged in.
Product reset correctly but does not respond correctly to the contoller.
· Fuse blown or internal fault
· Bad signal connection · Signal connection not
terminated
· Check if the Fuse is intact and eventually replace it if necessary.
· Contact the PROLIGHTS Service or authorized service partner. Do not remove
parts and/or covers, or carry out any repairs or service that are not
described in this Safety and User Manual unless you have both authorization
from PROLIGHTS and the service documentation.
· Inspect connections and cables. Fix eventual bad connections. Repair or
replace damaged cables.
· Insert DMX termination plug in signal output socket of the last product on
the signal line.
Timeout error after fixture reset.
Mechanical effect loses position
· Incorrect addressing of · Check the product address and control settings the product
· One of the product is · Unplug the XLR in and out connectors and connect
defective and is corrupt- them directly together to bypass one product at a
ing the signal transmis- time until normal operation is regained. Once found
sion on the signal line
the error, have that fixture serviced by a qualified
technician.
· One or more hardware · Check product stored error messages for more components requires information. Contact PROLIGHTS Service or an mechanical adjustments authorized service partner.
· Mechanical hardware · Check product stored error messages for more
require cleaning, adjust- information. Contact PROLIGHTS Service or an
ment or lubrification
authorized service partner.
Light output turn OFF Intermittently
General low light intensity
· Fixture is too hot
· Check product stored error messages. · Allow product to cool. · Clean the product and airflow filters. · Reduce ambient temperature.
· Hardware failure (tem- · Check product stored error messages for more
perature sensor, fans, Light source…)
information. Contact. PROLIGHTS Service or an authorized service partner.
· Dirty lens assembly
· Clean the fixture regularly.
· Dirty or damaged filters · Install lens assembly properly.
Contact an authorized service center in case of technical problems or not reported in the table can not be resolved by the procedure given in the table.
46
PROLIGHTS – Astra Hybrid330IP
24 – TEST OF IP65 RATING
It is recommended to verify IP grade using IPTESTBOX every time the bodies are
removed for maintenance. 1
Remove the gore valve from the connections panel. 2
Connect the air hose to the IPTESTBOX by inserting the quick-connect fitting
into the coupler.
3
Insert the threaded end into the threaded valve hole socket.
4
5
6
Loosen the four screws (4) and remove the rear cover. Remove the gore valve on
the rear connection heatsilk module (5) and insert the hex socket cap head
included in the IPTESTBOX box (6). For the operating procedure using the
instrument, refer to the IPTESTBOX user manual.
Fig. 12
PROLIGHTS is a trademark of MUSIC & LIGHTS S.r.l. musiclights.it
Via A.Olivetti snc 04026 – Minturno (LT) ITALY Tel: +39 0771 72190
prolights.it support@prolights.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>