coolado T·PUMP XL Cordless High-Pressure Double Cylinder Smart Tire Pump User Manual

coolado T·PUMP XL Cordless High-Pressure Double Cylinder Smart Tire Pump User Manual

Thank you for purchasing the Coolado tPump XL!
Discover the endless usages of this little smart device and share your experience on our website: www.coolado.com

ATTENTION! Please read this instruction manual carefully before using this product for the first time. It will guide you to use it correctly and remind you of the relevant precautions. This pump is a semi-professional tool and not a toy.
This product is a portable smart tire pump, suitable for the inflation of camper tires, SUV tires, mini bus tires, car tires, motorcycle tires, bicycle tires, balls and other high-pressure inflatables.
Presets are for indication only; a list of predetermined values is provided. To obtain accurate values, consult the product’s instruction manual.
After a lengthy usage, the air pump and tube may become hot. We recommend allowing the pump to cool down for 15 minutes before using it again in this scenario.
See list of preset values that are for indication only. For exact values see the manual of the product to be pumped.

BOX CONTENTS

PRODUCT DESCRIPTION

1. LED light
2. Pump hose screw hole
3. Warning sticker
4. Control panel
5. USB ports
6. DC port
7. Desk lamp
8. Lamp switch
9. LCD display
10. Up
11. Down
12. Power/set button
13. Start-Stop button
14. Air pressure value
15. Pressure unit
16. Battery indicator

INCLUDED ADAPTORS

1. Tube with with Schrader adapter
2. tClamp adapter with air release button
3. Adapter for Presta (or French) and Dunlop (or Dutch) valve
4. Ball pin needle adaptor
5. Inflatable adapter

FUNCTIONS

1. Automatic inflation
2. Pressure detection
3. Power bank
4. Light, Flash warning and SOS lamp

OPERATION OF THE PUMP

Turning on the display

1. Connect the tube to the pump and make sure it’s tight
2. Push the “Power on” button to switch on the display.
3. ln the power-on state after 180 seconds without any operation, the display will automatically turn off.

Battery indicator

The battery status bar is indicating the remaining power

Charging

• Please charge the battery fully before using the product for the first time.
• Use the AC-charger to connect to an AC socket.
• The battery indicator will light when charging

The detection of the actual air pressure

Connect the pump and the tire valve, press the ON switch, the current tire pressure will appear on the display.

Inflating process without presetting the air pressure

1. Press the SET button to activate the LCD display,
2. Then press the power switch to START/STOP the pump.

Inflating process with pre-setting the pressure value

1. Press the SET switch to activate the LCD screen, press the SET switch again to choose the pressure units between PSI, BAR, KPA or KG/CM2.
2. By switching the up and down buttons to preset the pressure value, quickly press the SET button to complete the setting or wait for the display flicker to stop.
3. Press the START/STOP button to start the inflation. When the air pressure reaches the preset value, the air pump will automatically stop.

Power bank function

When the LCD screen is not activated, long press the up button for at least 3 seconds, to start the power bank function, to charge your mobile phone, long press up button again to shut down the power bank function.

Lamp, Flash Warning and SOS rescue functions

Press the lamp switch button, click to the desired mode choose between the desk lamp, flash warning and SOS rescue functions.

USE OF THE DIFFERENT ADAPTORS

SCHRADER ADAPTER

The tube is standard equipped with a Schrader valve suitable for:

1. Mountain bikes
2. E-bikes
3. Motorcycles
4. Cars, caravan and campers

just screw the schrader side of the tube directly on the tire valve.

TCLAMP WITH PRESSURE RELEASE

The tPump XL includes a most clever quick connect valve, named the tClamp with a professional pressure release valve.
The tClamp is easy to connect to any Schrader valve directly, and any adapter that is supplied with the tPump XL.
The tClamp has a 90 degrees design which makes it easy to connect the tube in any difficult corner.
Just screw the tClamp to your pump tube schrader end and you can connect to any valve in an easy way.
The pressure release valve is used for when the air pressure in your tire is above the desired air pressure. Just push the button and release the air from your tire until it reaches the desired pressure.

PRESTA (or FRENCH), DUNLOP (or DUTCH) VALVE ADAPTER

Screw the Presta adapter into the schrader side of the tube of the pump, then connect the tube to the Presta valve suitable for:

1. Road bikes
2. Race bike

BALL NEEDLE ADAPTER

Screw the balloon needle adapter into the schrader side of the pump hose, moisten the needle a little and plug it into the balloon valve.
It is suitable for basketball, soccer and other types of balls.

INFLATABLES ADAPTER

For swimming pool and beach tools, balloons, toy balls…

CHOOSE THE RIGHT AIR PRESSURE

In order to ensure safety, before using the product to inflate, please inquire about the air pressure value required by the inflated item by reading the instructions manual from the supplier and avoid accidents caused by low- pressure or over-pressure.
Suitable air pressure value for common products.

A list of suggested values for indication only.
For accurate settings, consult the product’s manual.

PRODUCT PARAMETERS

Common unit conversion: 1 bar= 14.5psi, 1 bar= 100kPa.

SPECIAL NOTES

• Due to the fact that the inflation pressure of items like balloons, toy balls, swimming rings, and other goods is lower than this air pump’s pressure range, the inflation cannot be stopped automatically by setting a specific pressure. The Coolado ePump is a superb option for these goods.
• Please double check the air pressure required to prevent injury caused by over-inflation bursting while inflating.
• Please use the right adapters before inflating.
• Please avoid putting it in a high-temperature environment such as a car that can be exposed to direct sunlight;
• Do not bend or step on the inflation tube during inflation to keep the airflow smooth.
• Stay near the pump when the air pump is working and make sure the air pump is not over-pressurizing.
• Protect the pump against moisture, heavy falls, water immersion, and mud or sand intrusion;
• There is a DC motor in the air pump, which may generate electric sparks during operation. So do not put it near flammable liquids or gasses when in use.
• This product is a semi-professional tool and not a toy, keep away from children; keep a safe distance from children when inflating objects;
• If the pump or tubing gets too hot, allow the pump to cool for 15 minutes before using it again
• Please double-check the pressure value unit before setting it; otherwise, it may cause accidents such as tire blowout. The following is a list of common conversion factors: 1 PSI = 7kPa = 0.07 BAR 7
• Non-conformance: We disclaim any responsibility for any negative consequences that may result from incorrect usage or mishandling, or from non-compliance with the instructions in this manual.

TROUBLESHOOTING

CLEANING & MAINTENANCE

• The Coolado t-Pump needs only to be cleaned on the outside surface with a dry, soft cloth.
• The product has a built-in non-removable lithium battery. Please do not throw the product into fire or discard it carelessly. The lithium battery may cause fire, spontaneous combustion or explosion due to overheating, impact and water ingress.
• Store the tPump XL in a cool, clean and dry place. The storage temperature of the product should not be lower than -10 ° C or higher than 45 ° C. Excessive heat or cold will shorten the product’s lifetime and damage the built-in battery.
• The battery may be damaged if not used for a long time. It is recommended to charge the pump at least once every six months.
• Disconnect the charger when not in use. Do not replace or remove the battery by yourself.

WARRANTY

• The Coolado warranty is in line with EU legislation and rules.
• 15 days money-back guarantee from purchasing date.
• The pump must be returned to its original undamaged package. (See return policy on our website)
• Coolado provides a 1-year warranty for failures caused by normal operation according to the manual.
• Warranty period: According to invoice date.
• Improper use of the product and man-made damage is not covered by the warranty.
• Damages to the Coolado tPump caused by, but not limited to abuse, abnormal operation, water damage, non-advised power supply, high temperatures, motor burn caused by the high-voltage power supply, All man-made damage. Self-disassembly and accidental damage, damages caused by force majeure are not covered by the warranty.
• The warranty is limited to the value of the pump.
• The liability of Coolado will ALWAYS be limited to the value of the pump.
• Coolado will not be liable for damages to persons and/or property.

ADDITIONAL APPLICATIONS

We’re currently testing the tPump XL with a number of device makers, including air tents, kites, SUPs, and kayaks. Please see our website for additional applications for the tPumpXL.

On our website, you can find this manual in multiple languages.

Scan this QR Code or go to our website:

References

• Coolado - Outdoor Tech & Gadgets
• Coolado - Outdoor Tech & Gadgets

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>