ENDORFY EY7A007 650W Power Supply Instruction Manual
- May 15, 2024
- ENDORFY
Table of Contents
ENDORFY EY7A007 650W Power Supply
ErP Lot 6 Ready. Low power C6/C7 sleep state compatible. Active PFC.
CONNECTING THE PSU
INCLUDED CABLING
DO NOT USE ADAPTERS TO OTHER CONNECTOR TYPES.
POWER OUTPUT
INCLUDED CABLING
CAUTION!
- Use only manufacturer-supplied cables to connect your PSU.
- Cables not included with this power supply may not be compatible.
- Using them may cause serious damage to the power supply and connected system.
- Do not modify the cables, connectors or chassis of this device.
Safety instruction
- The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.
- Make sure that the product is in good working order before using it.
- The warranty does not cover mechanical damage to the product.
- This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
- Do not install and use the device within reach of children.
- To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
- Clean only with a dry, clean cloth. Do not handle it with wet hands.
- No user-serviceable components inside. Return to an authorized service centre for repairs.
- Opening the device or modifying it will void the warranty.
- Domediase this conduct tear kids were solaced where they may be directly exposed to liquids. If the device comes into contact with any liquids,
- In the event of a malfunction, disconnect it from the power source immediately and contact Endorfy Technical Support.
- Do not discard electrical and electronic equipment together with other household waste.
- The end user is responsible for the correct disposal of unnecessary or faulty electrical equipment by returning it to the collection point or the seller.
- Contact local authorities or the store where you purchased the product for additional information.
- CAUTION! Use only manufacturer-supplied cables to connect your PSU. Cables not included with this power supply may not be compatible.
- Using them may cause serious damage to the power supply and connected system.
- Do not open the power supply case. Hazardous voltage levels inside may be present even after disconnecting the power supply from its power
- Do not modify the cables, connectors or chassis of this device.
- This device requires adequate ventilation. Do not cover ventilation openings. Do not insert objects into openings.
- Do not install this device near heating devices.
- Do not install or remove the power supply unit while it is connected to the mains.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>