DORMAN 742-251 Power Window Motor Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 742-251 Power Window Motor
Product Information
Specifications:
- Part Number: 742-251
- Product Type: Window Lift Motors
- Distance Between Holes: Approximately 66mm
Description:
The Window Lift Motors are designed to replace original equipment motors in
vehicles. It is important to refer to the appropriate shop manual for specific
service procedures related to this part. If you are unsure about the
installation process, it is recommended to seek the assistance of a qualified
technician.
Compatibility:
Many OEM and replacement regulators can accommodate these motors, which
have a distance between holes of either approximately 62mm or 66mm. Some
regulators may require elongating the third hole for proper motor
installation.
Product Usage Instructions
Installation:
- Refer to the vehicle’s shop manual for specific service procedures.
- If unsure, seek the help of a qualified technician for installation.
- Ensure all cautions and warnings in the manual are followed carefully.
- If the third hole on the regulator is not elongated, use a file or rotary tool to elongate it for proper motor fitment.
Maintenance:
Regularly check the functionality of the window lift motors to ensure
smooth operation. Lubricate moving parts as recommended in the vehicle manual.
Troubleshooting:
If the window lift motors are not operating correctly, check for any
obstructions in the window tracks or damaged wiring connections. Consult a
technician if needed.
FAQ
-
Q: Can I install the window lift motors myself?
A: It is recommended to refer to the vehicle’s shop manual for installation procedures. If you are unsure, seek the help of a qualified technician. -
Q: What should I do if the motor does not fit properly?
A: If the third hole on the regulator is not elongated, use a file or rotary tool to elongate it for correct motor installation.
Replacement Regulators
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
Various Models 1965–98
- The distance between holes is approximately 66mm.
- Some original equipment motors that these replace may have a distance of approximately 62mm.
- Many OEM & replacement regulators have an elongated third hole that will accept motors with either the 62mm or the 66mm measurement.
- If this hole is not elongated on the regulator you are working with simply elongate the hole with a file or rotary tool to interface with the motor correctly.
Disclaimer
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed by such standards and that you do not disable any motor vehicle safety features.
©2011 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>