UMIDGI UWatch GT Flagship Sport Smartwatch Instruction Manual
- June 4, 2024
- UMIDGI
Table of Contents
- UMIDGI UWatch GT Flagship Sport Smartwatch
- Start to Use
- Operation Instructions
- Operation on Screen
- Operation of Gestures
- Introductions to Sports Functions
- Instructions to Other Functions
- Product Specifications
- Care Instructions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UMIDGI UWatch GT Flagship Sport Smartwatch
Start to Use
Turn On
- Automatic turn-on after charging
Note: The Watch must be charged and activated before the first use. Please use the original power adapter to charge the watch
- Turn on by pressing and holding DOWN button.
Download and Install VeryFitPro
You can directly scan the QR code to download VeryFitPro or search “VeryFitPro”in the APP store to download and install.
Note: Conditions required by hardware platform system are as below.
Please connect to mobile phone correctly
Bind the Watch
Drop down on APP home to show binding request Select product model, and tap “Confirm Binding” to complete binding.
Operation Instructions
Key Instructions
UP button | Press | In screen locked state: Unlock screen |
---|
Sibling interface: circularly flip
Pop-up interface: confirm
During stopwatch/timer working: pause/continue
During sports paused: continue sport
Press and hold| During sports: pause sports
Other interfaces: quickly launch sports
DOWN button| Press| In screen locked state Unlock screen
During sports paused: stop sports
Pop-up interface: Cancel/Close
During stopwatch working: count
During timer working: stop timekeeping and quit
Other interfaces: return to previous interface/dial
Press and hold| Turn on/Turn off
Operation on Screen
Operation of Gestures
Raise to turn on backlight. Hang to turn off backlight.
Note: ON/OFF of this function can be set up through mobile APP.
Introductions to Sports Functions
Activate Sports
Enter Sports list interface, slide up or down to select sports item, and tap icon to start sports.
Start Sports
When Sports is activated, the Watch will show sports countdown. Sports starts after the countdown.
Operations during Sports
Reminders during Sports
Heart rate reminder
During sports, the Watch will continuously detect current heart rate. If current heart rate exceeds the maximum heart rate, the Watch will remind to reduce sports intensity or stop sports through vibration and interface alarm. Set your safe heart rate reminder through More>Heart rate zone>User defined Max. heart rate in the mobile APP.
Pause or Stop Sports
Pause sports:
In the unlocked state, press and hold UP button to pause sports. Tap Continue
icon to resume sports. In the paused state, slide up to view current sports
data.
Stop sports
In the paused state, select STOP to stop sports .After sports, the Watch will
keep details of the sports. View in sports records.
Instructions to Other Functions
Health Data
Enter Health Data interface to view the accumulated steps, calories and distances when wearing the Watch that day.
Notifications
Turn on smart reminder
When it is in use, you need to turn on “Smart Reminder” on the APP end, select
and turn on notification types to be reminded, and this function requires
keeping the connection between the Watchand mobile phone.
View message
When receiving message, the Watch will vibrate to remind. If the message is
not immediately viewed after being received, slide down to view the message.
Delete message
The Watch can save the most recent 12 notifications. Beyond the limit, the
earliest notice will be automatically deleted once a new notice is received.
When the notification content exceeds one screen, it will be displayed
continuously on the second screen.
- On the message list view interface, slide left single message box to show Delete icon, and tap Delete icon to delete the message.
- Slide down to the top of message list, and tap Clear icon to clear all messages.
Heart Rate
The Watch supports heart rate detection. Slide to Heart Rate Detection interface, hold for two seconds, the Watch will automatically detect heart rate. Please stand still during the detection, so that the Watch can output more accurate heart rate data
Note: To improve the accuracy of heart rate detection, please wear the Watch correctly and keep the wearing parts clean.
Weather
Weather function allows you keep track of the weather in your city. Because weather data is obtained through mobile phone network, it is required to maintain the connection between the Watch and the phone to timely update weather data.
More Functions
Stopwatch
It is available to record multiple times. Timer It is available to set count-
down. Remind through vibration after count-down is over.
Alarm clock
Set alarm clocks in mobile APP. When it is the set time, the Watch will remind
through vibration. In case of no operation after 20s, the alarm clock will
automatically stop. After 5 minutes, the alarm clock will remind again. Press
UP/DOWN button to pause the alarm, and after 5 minutes the alarm clock will
remind again.
Call reminder
Call Reminder can be set in mobile APP. When it is in use, turn on Call
Reminder function in mobile APP, and keep the connection between the Watch and
the phone. When there is an incoming call, the Watch will remind through
vibration. Close the call pop-up by pressing UP/DOWN button.
Control Center
DND mode
Slide up once on dial interface, and enter control center interface. Tap DND
icon to lighten the icon . DND mode is on. Tap DND icon again to dim the icon.
DND mode is off.
Brightness adjustment
Slide up once on dial interface, and enter control center interface. Bightness
level is defaulted as Level 2 . Tap the brightness icon to switch it to Level
3 . Tap the icon again to switch it to Level 1 . Tap the icon again to switch
it to Level 2 . Conduct repeatedly in order.
System settings
Slide up once on dial interface, and enter control center interface ,and tap
System Setting icon to enter system settings.
In system settings, you can enter:
- Dial settings: tap and enter this function to switch dials among different styles.
- Pressing and holing UP button settings: tap and enter this function to set sports style entered by pressing and holing UP button.
- Factory data reset settings: tap to enter factory data reset procedure.
- Firmware information: tap and enter to view firmware information and Bluetooth address
Product Specifications
Care Instructions
- Please stop using the Watch and disconnect all connections with other equipment before cleaning and maintenance.
- Please keep the Watch and its accessories dry. Do not dry them with external heating equipment such as microwave oven or hair dryer.
- Do not place the Watch and its accessories in an area where the temperature is too high or too low, which may cause malfunction, fire or explosion.
- Avoid strong shock or vibration to prevent damage to the Watch and its accessories or failure.
- Please do not disassemble or modify the Watch and its accessories without permission. In case of failure, please contact after-sales service
FAQ
Mobile phone cannot be connected to the Watch.
- It is recommended to update VeryFitPro to the latest version.
- It is recommended to quit all APPs, reactivate the phone Bluetooth and re-connect.
- Confirm that system of the phone is Android 4.4 or iOS 9.0 and above.
The Watch has no message or call reminders.
- It is required to turn on smart reminder function and call reminder function in APP and synchronize to the Watch.
- The Watch should be paired with mobile phone through Bluetooth.
- It is required to keep Watch Bluetooth under normal connection
Bluetooth disconnects frequently.
- Relatively long distance between the Watch and the phone may cause Bluetooth disconnection, and the effect of Bluetooth connection over 7 meters will be obviously weak.
- Shielding between the Watch and the phone will affect the connection, and human body and metal jewelry will interfere Bluetooth connection signal.
- Please confirm that Bluetooth function of the phone is normal. More detailed FAQs can be obtained through help and feedback in the APP. Operating steps: VeryFitPro > > FAQ
Safety and Product Information Notes
Warning
Battery warning
Do not disassemble, bore or damage the battery. Do not disassemble the built-
in batteries of non-replaceable battery devices. Do not use sharp objects to
remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring strap
The watch’s optical heart rate sensor glows green and flashes. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician if you can wear this product. The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities, such as steps, sleep, distance, heart rate and calories, but may not be completely accurate. The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.
Cycling Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring strap.
Notes:
Device data should be synchronized once every seven days to avoid data loss.
The device has no waterproof effect on seawater, acidic and alkaline solution,
chemical reagent and other corrosive liquids. The damage or defect caused by
misuse or improper use is beyond the warranty scope. The device supports the
use under cold shower or swimming excluding diving
- In daily use, the device should be avoided from wearing too tight. Please keep the parts where the device touches the skin dry.
- During heart rate detection, please keep your arm stand still.
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.