DORMAN 674-695 Driver Side Exhaust Manifold Kit Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 674-695 Driver Side Exhaust Manifold Kit
Specifications
- Model Number: 674-695
- Category: Tech Notes
- Installation Type: Attention Required
Installation
- Before starting the installation process, refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part.
- If you lack the necessary skills or do not have a service manual, it is highly recommended to seek the assistance of a qualified technician.
- Pay special attention to all cautions and warnings included in= the shop manual. Read and follow all instructions carefully to ensure proper installation.
Step-by-Step Installation Guide:
- Identify the numbered components: 1, 2, 3, … 8.
- Follow the sequence of installation: 1, 2, 3, … 8.
- Ensure each component is securely installed before proceeding to the next step.
FAQ
Q: Can I install this product without a service manual?
A: It is recommended to refer to the appropriate shop manual for specific
service procedures. If you lack the necessary skills, it is best to seek help
from a qualified technician.
TECH NOTES: INSTALLATION
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
Ford 2014–04, Lincoln 2014–05
This Tech Note shows the torque sequence and specifications for these Ford
manifolds.
NOTE: Left position is shown, the right position is similar.
Install 16 new exhaust manifold studs. Tighten to 12 Nm (106 lb·in).
Position a new gasket and the left hand exhaust manifold and tighten the 8 nuts in the sequence shown. Tighten to 25 Nm (18 lb·ft).
Disclaimer:
Even though every attempt is made to ensure this information is complete and
accurate, it is impossible to account for all possible circumstances or
situations. Please consult with a qualified auto technician before attempting
to perform any work you are not qualified to do. Automobiles can be hazardous
to work on; be sure to take all necessary safety precautions. Failure to do so
may result in property damage or personal injury. Certain motor vehicle
standards and performance requirements may apply to your motor vehicle (such
as Federal Motor Vehicle Safety Standards by the National Highway Traffic
Safety Administration). Be sure that your work is performed in accordance with
such standards and that you do not disable any motor vehicle safety feature.
©2018 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.