CHAPIN 41330 3-Gallon Industrial Poly Water Supply Tank Sprayer Instruction Manual
- June 8, 2024
- CHAPIN
Table of Contents
CHAPIN 41330 3-Gallon Industrial Poly Water Supply Tank Sprayer
Congratulations!
You have just purchased a quality Chapin product. Register Your Sprayer Online
@ www.chapinmfg.com
Questions? Do Not Return To Store. Call us @
1-800-950-4458 or
www.chapinmfg.com
WARNING
WARNING: Improper use or failure to follow instructions can result in explosive failure causing serious eye or other injury.
- For safe use of this product you must read and follow all instructions.
- Do not leave a pressurized sprayer in the hot sun.
- Heat can cause pressure build-up resulting in possible explosion.
- Do not store or leave solution in tank after use.
- Always wear goggles, gloves, long sleeve shirt, long pants and full foot protection when spraying.
- Never use any tool to remove pump if there is pressure in sprayer.
- Never stand with face or body over top of tank when pumping or loosening pump to prevent ejecting pump assembly and/or solution from striking and injuring you.
- Never pressurize sprayer by any means other than the original pump.
- Do not attempt to modify this sprayer. Replace parts only with manufacturer’s original parts.
- Never spray flammable, caustic, acidic, chlorine, bleach or other corrosive solutions or heat, pressure, or gas producing chemicals.
- Always read and follow chemical manufacturer’s instructions before use with this sprayer as some chemicals may be hazardous when used with this sprayer
Hose to Tank
- Make sure white outlet tube is attached to adapter.
- Insert tube into tank.
- Slip adapter nut down to tank, turn clockwise and tighten as tight as possible by hand.
Filling
- Do: Turn pump handle counterclockwise and remove pump
- Do: Prepare spray solution following all directions and safety warnings on chemical label.
- Do: Fill tank to no more than the proper gallon marker. Do NOT: overfill to accommodate pump.
- Do: Check pump to make sure that no grass or dirt is stuck to barrel. Replace pump in tank and tighten securely
Pressurizing and Spraying
- Do: Turn handle clockwise to tighten. Push handle down, turn 1/4 turn counterclockwise to release.
- Do: Pump until you feel resistance.
- Do: Push handle, down, turn 1/4 turn clockwise to lock. Begin spraying. Repump sprayer as required to maintain spray force.
Care, Storage and Maintenance
- Do: Rinse tank thoroughly with water only, empty, refill with water. Follow Filling, Pressurizing and Spraying Instructions, except pump unit only 8-10 strokes.
- Do: Store sprayer tank upside down, with pump removed, in a warm dry location.
- Do: Periodically oil pump by dropping 10-12 drops of light oil down pump rod through opening in cover.
P.O. Box 549 700 Ellicott St.
Batavia, NY 14021-0549 U.S.A.
1-800-950-4458
www.chapinmfg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>