DAEMA DWF-A1199JD Washing Machine User Manual

DWF-A1199JD Washing Machine
User Manual WASHING MACHINE

Parts name

Accessories

| |
---|---|---
Bottom cover (1pc)| Water inlet hose (1pc) water inlet hose connector(1pc)| Drainpipe(1pc)
Drainpipe clip(1pc)

Symbol definition

Warning symbols| Pay special attention to the warning symbols. There may be serous risks to personal body safety or damages to the  washing machine if not follow.
---|---
Forbidden symbols| Please stop doing the contents with this symbol, otherwise it will damage the appliance or injure your personal body.
Please insert the plug into the power socket with rated voltage
240V A/C.| Always unplug the appliance and turn off the water when the power is cut, moving or cleaning the washing machine, or it is not in use. Do not insert or pull off the plug with wet hand.
---|---
Do not make the electric cable bended, stretched, twisted, strapped or changed, pressed or nipped. If the electric cable or plug is damaged or the socket  becomes loose, they must be repaired or changed by our appointed repair stations or the professionals of our post-sale service department to avoid  danger. The pin of the plug must remain clean. Please clean it carefully with dry cloth if it is dirty.
Don t install the washing machine in bathroom or damp places,. Do not  wash the machine with water, do not put wet clothes on the control panel film.| Do not use water hotter than 50 C.
---|---
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.| Do not wash raincoat, bike cover, feather dress and such waterproof  laundries, which will make the washing machine abnormal vibrations during spinning.
Do not share the same socket with other electric appliances.
Do not use the damaged plug or loose socket.
Do not put hands into the working machine.
It is dangerous even if the speed is very slow.
Take special care of the children, and forbid them to climb on the washing machine.| It is dangerous to alter the specifications or attempt to modify this product in any way.
---|---
Do not overload the appliance or put any hot goods(such as the kettle with hot water)on the washing machine.| Garments which have been in contact with volatile petroleum products  should not be machine washed.
This appliance is not intended for use by persons(including children) with reduced physical,sensory or mental capabilities,or lack of experience and knowledge,unless they have been given supervision or instruction  concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.| Keep the appliance away from direct sunlight and heat sources like the heater.
To prevent the lint from blocking cascade outlet during  washing, please keep the lint filter in good condition, install  it to proper position and clean it in time.| Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into to the machine.
---|---
Before washing, please ensure the tap is open and the inlet hose is installed properly.
It is suggested to use low foam washing powder.

Installation and adjustment

Please install and adjust the machine according to the requirements of the manual.
It is very important to your safety and correct operation.

Unpacking

• Unpack the carton and take out the bottom panel.
• Open the top lid of washing machine and take out all of the accessories.
• Remove all wrappers, including the polystyrene base.
• You are advised to keep all the packaging for reuse in case the machine is to be transported again.

Installing the bottom cover
Let the back of washing machine incline forward make the side of bottom cover with sticker description back to washing machine insert to the bottom of washing machine along the direction of arrow.
Remove two fixing clamp by scissors insert to the accordingly holes red lines indicating gently pull fixing clamp should not be pulled out make the bottom cover fixed on the base.

Positioning
The distance between the washing machine and the wall should be more than 50mm, and the maximum allowed angle of the shank base of the machine is 1 .The slanting or  rough ground may cause operating stopped or unstable, please adjust it with the following methods:

Make it horizontal
Use a tied thread with plumb to check if it is horizontal.

Adjust the adjustable foot

1. Lift up the adjustable foot gently, loose the adjustable nut and twist the adjustable foot.
2. Fasten the nut after adjustment.

How to use drainpipe

Install drainpipe
Set drainpipe clip into the drainpipe to 2-3cm (from the drainpipe end that without pothook to set), then install the drainpipe into the right drianpipe connector and fix the  drainpipe and drianpipe connector with the clip,after that put up the drainpipe clip on the cabinet.

How to change the direction of the drainpipe

1. Take off the drainpipe and drainpipe clip from drainpipe connector, put some soft mat on the floor, make washing machine front side adown and gently put down the washing machine front side on the mat, demount the screws on the back cover with screwdriver and take out the back cover. Demount one screw that fixed the drainpipe connector(on right of the washing machine), loosen the drainpipe connector. (Section sketch map for washing machine right side)
2. Extrude the drainpipe with proper force and take out drainpipe hoop(on right of the washing machine),make the the inner drianpipe loosen. Section sketch may inside washing machine
3. With proper force to take down drainpipe gate stopper on left side of the washing machine. The drainpipe gate stopper is fixed on washing machine base with two clips, please see the fixing type from the place of opening back cover. Section sketch map for washing machine left side
4. Pull the inner drainpipe to another side , please do not make the inner drainpipe distortion; as per foregoing description, fix inner drainpipe with drainpipe hoop, with one screw fix drainpipe connector, install the drainpipe gate stopper to another side, make washing machine standing gently,fix back cover with screw and install the drainpipe and drainpipe clip into the drainpipe connector.

Water drainage

The drainpipe should drain smoothly

1. The height of the drainpipe should be less than 10cm, otherwise the drainage will not be smooth and need a long time to drain, the machine may stop during working.
2. Do not step on or press the drainpipe.
3. Cut the drainpipe if it is too long. Cut the front end of the drainpipe slantingly to make drainage smoothly.
4. Purchase a proper hose if you need additional drainpipe. Its diameter should not less than 30mm and length should not exceed 1.5m.

If the additional drainpipe is too long, cut some at A or B point.

Water inlet installation

Tap selection

The front end should be longer than 10mm The tap exit end face should be flat and smooth, if not file it to avoid leakage

Connect the inlet hose connector with the tap

1. Press the lower end of the lock lever and push down the slider, take off the inlet hose connector from the inlet hose, see illustration 1.
2. Loosen the four bolts on the inlet hose connector till the tap can be accessed, then set the inlet hose connector in the tap, see illustration 2.(if the tap caliber is too larger  and could not set the inlet hose end, unscrew the four bolts and take out the bushing, tap exit end must flat, otherwise it will leak, see illustration 3)
3. Fasten the four bolts in the inlet hose connector evenly, see illustration 4.
4. Twist the fastening nut as the illustration ,see illustration 5.
   Remark before twisting the nut, the threading is about 4mm above the upper surface of the nut, after twisting, Zthe threading is less than 2mm above the upper surface of the nut, see illustration 6.

Connect the inlet hose with the washing machine

1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it is, contact the seller immediately.
2. Put the inlet hose nut on the inlet valve connector.
3. Fasten the inlet hose nut and swing it gently to make sue if it is suitable.

Cautions:When install the washing machine, please use the new hose assy along with the washing machine, old hose assy can not reuse.

Connect the inlet hose connector with the inlet hose

1. Push down the slider, insert the inlet hose into the connector
2. Hang the lock lever to the inlet hose connector and release the slider till a click sound is heard.

Check the connection between inlet hose connector and the tap

1. Swing the inlet hose gently to confirm if it is fastened.
2. After installation, open the tap and check if it leaks.
3. Do not bend the inlet hose with overstrain.
4. Before each usage, check the connection between inlet hose connector and the tap, and the installation of inlet hose. Make sure they are firmly fitted to prevent dropping from improper installation position.

Dismantle the inlet hose

1. Close the tap.
2. Press the locking lever, push down the slider, and pull of the inlet hose. If the machine is used frequently, the connector of the inlet hose can be kept on the tap to  prevent damaging the fixing screw.

Preparation before operation

Preparation before washing

1. Connect the inlet hose and open the tap.
2. This appliance must be earthed. Confirm  the socket is earthed reliably and insert thepower plug. The earth terminal should not link to gas pipeline, tap pipeline etc.
3. Put down the drainpipe.

Warning: the temperature of the water should less than 50
Before washing the laundries, please pay attention to the followings:
Make sure if there is special requirements for the laundries

Before washing, empty all pockets of small objects which may have been left inside (coins,keys,screws etc.) As these could damage the drain pump.| Knot the long band, fasten the buttons and close the zippers.
---|---
|
Do not overload the machine. Load the laundry loosely alternating large items with small ones.| Sort the laundry according to the type of fabric, color- fastness and how dirty it is. Put thin laundries, woolens and such prone to wear and tear laundries into washing bag.
|

Load laundries

• The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition .Washing quantity shall be lower than the  rated capacity. The maximum capacity of this machine is 11.0kg.
• Different thickness, size and type of the laundries will influence the actual washing capacity. It is suitable that the laundries can be turned round normally during washing.
• Do not select high water level when laundries are less than 1.5kg to avoid water splashing.

Use of detergent

• Withdraw the dispenser box before adding detergent
• Pour concentrated synthetic washing powder into the box directly as shown in the left illustration.
• The dosage of the washing powder, please refer to below.
• It is suggested to use low sud washing powder.

How to use bleach

• Fill water to the selected level, dilute the bleach in the container, and pour it slowly into the washing tub.
• Do not use bleach for colored or figured laundries as they are prone to lose colors.
• Do not put bleach to laundries directly.
• Refer to the manual for the usage and quantity of the bleach.
• Please dissolve powder bleach before use.

How to use the washing powder

• Dissolve in the machine directly not suitable for preset program
  1. Low water level.
  2. Add the washing powder, and run for 30 seconds to dissolve it completely.
  3. Put laundries in, select suitable water level.

• The instant dissolving of the washing powder
  1. Prepare warm water of 30 C in a container.
  2. Pour the powder while stirring to fully dissolve it.

• The washing powder is more prone to pollute the laundries than the detergent, therefore, please use it with proper quantity.

• Washing powder with poor quality or not used for a long period may get blocked, please clean the detergent box in time.

It is suggested to use low foam washing powder
For the quantity of the concentrated washing powder, please refer to its manual
Remarks avoid splashing of water and waste of washing powder, water level should not be too high if laundries are too small.

Control panel instruction

Mode and meaning of the indicator light
on: indicate the selected mode
flashing: indicate the program is running

Additional functions

• At the beginning of start, pressing WATER LEVEL , at the same time press PRESET, you can select WATER RECYCLE, LOW NOISE , LOW NOISE-WATER  RECYCLE.
  Only both RINSE and SPIN are selected, WATER RECYCLE can be selected. Once LOW NOISE is selected, program default setting is NORMAL and PROGRAM button is locked.

• During working, press WATER LEVEL and PRESET to set CHILD LOCK, press again to unlock this function.

• Soak

• Wash

• Rinse

• Spin

• Press this button to select one cycle from wash-rinse-spin spin soak-wash-rinse -spin wash wash-risne rinse-spin

• At the beginning of start, the process setting is wash-rinse-spin .

At the beginning of start state
Put through the power, press POWER button, the machine is in the state of beginning of start:

1. If no water in the inner tub, the washing machine is in state of FUZZY, the process is wash, rinse, spin . The program is NORMAL ,digital timer shows — , at this time, if  press START/PAUSE button(or press program to select HEAVY),the washing machine can automatically set the water level according to the laundries quantity.
2. If there is water in the inner tub, and the machine is in state of non FUZZY, the water level setting is 7 . Process is wash,rinse, spin program is NORMAL .

Operation

Program
Can select one program from NORMAL,HEAVY,SOFT,STANDARD, FAST, WOOL,CHILD,FOAM CLEAN,TUB CLEAN and AIR DRY At the beginning of start, the process is NORMAL.

Preset /Air dry

• At the beginning of start, press this button to select preset time from 2-24 hours.
• If want to cancel preset time, press POWER to make the washing machine in waiting state.
• If need to select air dry, please press “PROGRAM” button to select airy dry,then press this button to set air dry time.
• At the beginning of start, if with FUZZY logic and do not select water level, the digital timer shows – – at this time, before press START/PAUSE, If select NORMAL or  HEAVY, with fuzzy logic. When select STANDARD, no fuzzy logic, the water level is 7 When select FAST, no fuzzy logic, water level is 2 . If no WASH process, no  fuzzy logic.
• At the beginning of start, press WATER LEVEL to select water level, at this time, no fuzzy logic function, you can select appropriate water level. According to your  laundries quantity.
• 1-2 is low water level, 3-6 is middle water level,7-10 is high water level.
• During wash (including rinse), if need to add water, press WATER LEVEL button to add water, un-press will stop adding. Or PAUSE the washing machine and press  WATER LEVEL to select higher water level, then press START/PAUSE button, The washing machine Will add the water to setting level automatically and continue  working. If your resetting water level is lower than present water level, the lowe r water Level will valid in next water inlet.
  Automatically add water: during SOAK, WASH and RINSE process, if the washing machine check the water level is lower than setting water level, The washing machine  will pause and add water to setting water level automatically.

Operation steps

Operation steps

1. Press power switch, put through power, the machine is in state of beginning
2. if there is no water in inner tub,washing machine is in state of “FUZZY”,the state details as per each model’s button explanation. Now press “START/PAUSE”  button (press “PROGRAM” and select “HEAVY”,the washing machine is in state of “FUZZY”), the washing machine will start fuzzy sensor and to sensor the weight of  laundries and set water level automatically.
3. If there is water in inner tub, washing machine is not in state of “FUZZY”,the state details as per each model’s button explanation.Now press “PROGRAM”  and”PROCESS” to select proper program and process.
4. Press program button to select proper program
5. Press process button to begin process selection
   Times of pressing the “process” button| Selected procedure program| Applicable procedure| Contents(the lighted indicator indicate the programsabout to run)
   ---|---|---|---
   0| Wash, rinse, spin| Standard program| Wash rinseand spin lights are on
   1| Spin| Wash by hand and only need tospin| Spin g son light V i
   2| Soak, wash, rinse ,spin| For dirty laundries| Soak, wash, rinse and spin lights areon
   3| Wash| when use detergent repeatedly| Wash light is on
   4| Wash, rinse| No need tospin for laundries creased easily| Wash and rinse lights are on
   5| Rinse ,spin| Wash by hand and need to rinseand rinse| Rinse and spin lights are on

Remarks: press PROCESS button continually, the above mode will be cycled in turn.

4. Select appropriate water level according to your laundries quantity.
5. At the beginning of start, if need to select LOW NOISE, WATER RECYCLE, pressing WATER LEVEL button and press PRESET button, circularly select LOW NOISE and WATER RECYCLE. Only you select RINSE and SPIN, you can select WATER RECYCLE.
6. At the beginning of start, if need to select preset, please press PRESET button and select appropriate preset time, the preset time is shown in the digital timer, and the time indicates the time to finish the whole washing. If want to cancel PRESET, please press POWER to make the washing machine in waiting state.
7. At the beginning of start, if need to select air-dry, press PROGRAM button and select AIR DRY program,press PRESET can select the time of AIR DRY. When the air dry function is over, the washing machine will be in waiting state.
8. Close the top lid, press START/PAUSE, the washing machine is working. During working, press WATER LEVEL and PRESET button, child lock function will start, press again, unlock this function. If open the top lid, washing machine stop working and give an alarm.
9. When the washing is finished, buzzer alarm, power supply cut off automatically.

Maintenance

Maintenance methods

After the end of the programme
The machine stops automatically ,and music buzzer will remind you to take out the laundries or start again.
Once you have finished using the machine, you are advised to unplug it and turn off the water taps to avoid unexpected leak or fire.| External cleaning
Clean the exterior cabinet of the appliance with soft cloth. Do not use cleanser, volatile chemical materials to clean the machine, which will damage plastic parts and the surface.
---|---
Clean the lint filter
It is necessary to use lint filter during washing.
After washing, please clean the lint filter in time.
Clean the lint filter according to the following steps:
1. Pull out the lint filter.
2. Turn the filter net outside and wash it.
3. Recover the filter net and remount it.| Clean inlet gate
It is possible that the inlet filter net can be blocked by the dust, please clean it  according to the follow steps:
1. Close the tap and turn on the power switch.
2. Start the washing machine for 5 seconds(make the water in the inlet hose flows to the tub),and cut off the powersupply.
3. Pull off the inlet hose, remove and clean the inlet valve and the inlet net, and install again.

1. Once you have using the machine, you are advised to turn off the water taps.(if necessary, pull out the inlet hose)
2. Do not keep water in tub for a long time. When washing is finished , drain it right away.
3. Once you have finished using the machine, you are advised to unplug it.
4. Put the electric cable and the drain hose in order.
5. Wipe the water on the surface and in tub with soft cloth and keep the top lid opening for a while. It helps to prevent mould and stagnant smells forming inside the appliance.

If the water in the inner tub has possibility to freeze,please do like below:

1. In winter, if remaining water freeze can cause the washing machine trouble, please take off the water inlet hose and drain out the water in the hose and inner tub.
2. If the water freeze, please don’t operate the washing machine. Put 40 hot water in the tub, the hot water should submerge the pulsator, after a few minutes, rotate the  pulsator by hand gently, then you can operate the washing machine.

**Troubleshooting

**

Before contacting the technicians, please make the following checks:

in the socket Power switch is not turned on Power supply is cut off
Inlet hose leaks| Inlet hose connector(connecting with the tap)is not fixed tightly Inlet hose and washing machine connector is loose
It does not drain| Drainpipe is not put down Drainpipe is bended or get blocked
It does not inlet| No water supply Tap is not open Inlet hose gets blocked
Spin stops and begins to inlet during spin program| Laundries is too much or too little or the Machine is not place evenly
Press the program button to select SPIN, but It does not spin| Do not close the top lid when drain is finished Open up the top lid when start drain
The spin is intermittent when spin  starts| Balance the laundries to reach to the best spin effect

Settlement
Insert the plug tightly
Check the socket or change to another socket
Press power switch
Check power supply
Install the inlet hose again Tighten the connector of the machine
Put down the drainpipe
Straighten or clean the drainpipe
Restart when water supply is resumed
Open the tap
Clean the filter according to before clean inlet gate
The machine is adjusting automatically
Close the top lid
Close the top lid
Normal
Normal

Notes If there is still a fault after the above checks, please pull out the plug and contact the seller right away. It is dangerous to repair this product by yourself.

Other functions

1. Give an alarm
   Display| Explanation| Settlement
   ---|---|---
   EO| The top lid is opened when preset is started| Close the top lid and clear upthe alarm
   El| After draining 5 minutes, it still does not reach to water level| Open top lid, according to before troubleshooting and settlement to settle it ,then close the top lidand clear up the alarm.
   E2| The top lid is open when spinning| Close the top lid and clear upthe alarm
   E3| Spin does not balance| Open the top lid ,make the laundries place equally, then close it andclear up the alarm
   E4| After inlet 20 minutes still not reach to setting water level| Open top lid, according to before troubleshooting and settlement to settle it. Then close the tip lidand clear up the alarm
   E5
   child-lock light flashing synchronously| The top lid is opened after setting child-lock| Close the top lid and clear upthe alarm
   Fl| Water level sensor is wrong| Cut the power supply and call the technicians

2. Imbalance adjustment
   During spinning, if the laundries are not placed equally in the tub, it would cause violent vibration. This machine has imbalance adjustment function, and the vibration  testing system will supervise the running. Once vibration is beyond certain level, the adjustment system will start automatically to adjust the imbalance.

3. Power supply is cut off automatically

1. Press the power supply button and does not start the program in 10 minutes, the power supply will be cut off automatically.
2. After the washing is finished, buzzer will remind, the power supply can be cut off automatically.

4. Child lock function
   (1)if set child lock function, all the buttons will be locked including POWER. If the top lid is opened during the washing machine working, the washing will be stopped  and give an alarm. But if you can close the top lid in 5 seconds, the washing machine will stop alarm and continue working. If can not close the top lid in 5 seconds, the  washing machine will begin draining if there is water in the inner tub ,even closing the top lid is not valid. During the draining, alarm will be given every 10 seconds ,  when the water in the inner tub is about 5cm higher, alarm will be given every 10 minutes (alarm is always given) . When the draining is finished, the washing machine  will be in the state of waiting, if close the top lid, the washing machine is unlocked and start working as previous setting.
   (2) Once child lock is set, if open top lid over 5 seconds during washing or rinse(there is water in the inner tub), washing machine will drain and give an alram. If you  unlock the function during draining, the washing machine will add water to setting water level and continue working.

5. Water recycle function
   If set water recycle function, after the last time rinse finished, the washing machine will not drain and spin, SPIN and WATER RECYCLE indicator light are flashing and  an alarm is given, the washing machine stop working (if nobody operate, the alarm will be given every 10 minutes, in 1 hour, power supply will be cut off  automatically). When press START/PAUSE, WATER RECYCLE indicator light is on and the washing machine begin to drain and spin, the user can reuse the water.

Specification

3/48L 2/44L 1/40L
Inlet pressure| 0.03MPa-0.85MPa
Rated input power| Wash: 455W spin: 335W
Weight| About 39kg
Dimensions| W600mm D622mm H970mm

Marketed by:
Daewoo Electronics  Sales & Services (M) Sdn. Bhd.
Lot 886, Bay B2-B4, Jalan Subang 9,
Taman Perindustrian Subang,
Batu 14, Jalan Puchong-Hicom,
47100 Selangor

Documents / Resources

| DAEMA DWF-A1199JD Washing Machine [pdf] User Manual
DWF-A1199JD Washing Machine, DWF-A1199JD, DWF-A1199JD Machine, Washing Machine
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>