DORMAN 300-200 Power Steering Pump Pulley Instruction Manual

Table of Contents

Specifications:

Installation:
Before you begin the installation of the power steering pump pulley, it is recommended to seek the services of a qualified technician to ensure proper procedures are followed.
Safety Disclaimer:
Automobiles can be hazardous to work on. It is important to take all necessary safety precautions to avoid property damage or personal injury. Be sure to consult with a qualified auto technician before attempting any work you are not qualified to do.
Compliance:
Ensure that the installation of the power steering pump pulley complies with certain motor vehicle standards and performance requirements that may apply to your vehicle. Be sure not to disable any motor vehicle safety features during the installation process.

Step-by-Step Installation:

Locate the power steering pump pulley on your vehicle.
Remove any existing pulley carefully using appropriate tools.
Clean the mounting surface for the new pulley to ensure a secure fit.
Place the new power steering pump pulley in position and align it correctly.
Tighten the pulley in place according to manufacturer specifications.
Double-check the installation to ensure everything is secure and aligned properly.

FAQ:

Q: Do I need any special tools for installing the power steering pump pulley?
A: Yes, you may need specific tools like a pulley puller or installer depending on your vehicle’s make and model. It is recommended to consult the vehicle’s manual or a technician for guidance.
Q: Can I install the power steering pump pulley myself without professional help?
A: While it is possible to install the pulley yourself, it is advised to seek professional assistance if you are unsure about any step in the process to avoid any potential damage or safety hazards.

TECH NOTE: INSTALLATION POWER STEERING PUMP PULLEY

BEFORE YOU BEGIN:

Always wear proper safety equipment when performing repairs.
Ensure this part fits your exact vehicle year, make, model and configuration. You can verify at your point of purchase using the part number on the box, or using the part number above at DormanProducts.com.
Reference the appropriate service manual for your vehicle. If you do not have a service manual, and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.

Please take note of the following installation notes to ensure proper installation:

This pulley is a press-fit pulley. Special tools and installation techniques are required to properly install this pulley. Failure to use the appropriate tools and procedures may result in damage to the pulley and/or power steering pump, or an inability to fully install the new pulley on the pump shaft.
Due to the press-fit of pulleys to pump shafts, included pulley retaining hardware is not to be used for pulley installation.
The outside diameter of the new pulley may be slightly different than the pulley you are replacing. This will not affect the operation of the pulley or power steering pump; however some applications may require a slightly longer belt.

Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions.
Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.