DORMAN H620441 Front Driver Side Brake Hydraulic Hose Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN H620441 Front Driver Side Brake Hydraulic Hose
Product Specifications:
- Product Name: Brake Hydraulic Hose
- Manufacturer: Dorman Products, Inc.
- Technical Support Contact: 1-866-933-2911
Product Usage Instructions
Warnings:
Do not mount the hose to any moving parts to prevent damage or accidents.
Before You Begin:
Ensure you have the necessary tools and equipment ready for installation.
**Installation Steps
**
- Identify the brake hydraulic hose parts based on the provided diagrams (Figure A and Figure B).
- Position the hose carefully, avoiding any contact with moving components.
- Secure the hose using appropriate fittings and connectors.
- Double-check the installation to ensure proper alignment and no leaks.
Frequently Asked Questions (FAQ):
-
Q: Can the brake hydraulic hose be used in all vehicle models?
A: The brake hydraulic hose is designed for compatibility with a wide range of vehicles, but it is recommended to check compatibility with your specific model. -
Q: What should I do if I encounter a leak after installation?
A: If you notice a leak, immediately stop using the vehicle and contact our Technical Support team at 1-866-933-2911 for assistance. -
Q: How often should the brake hydraulic hose be inspected for wear and tear?
A: Regularly inspect the brake hydraulic hose during routine maintenance checks or whenever you notice any abnormalities in braking performance.
A hose hanger clip (Figure A) is included to mount the new brake hose. This
clip is to assist in securing the brake hose. It is designed to allow the hose
to travel through the clip freely but will break away during overextension of
the suspension during off-road use. You must check the routing of the brake
hoses often to ensure they do not become damaged or severed.
An example of the installation of the clip is shown below (Figure B). The
exact installation on your vehicle may vary. One of two included zip ties
should be used to secure the clip.
NOTE: Do not mount hose to any moving parts
BEFORE YOU BEGIN
- Always wear proper safety equipment when performing repairs.
- Ensure at your point of purchase that this part fits your exact vehicle configuration.
- Reference the appropriate service manual for your vehicle. If you do not have a service manual and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.
NEED HELP?
Please call our Technical Support team for assistance from our team of
certified automotive experts.
1-866-933-2911
Dorman Products, Inc. Corporate Office and Customer Service: 1-800-523-2492.
Disclaimer:
It is impossible in these instructions to account for all possible
circumstances or situations that you may experience when attempting to install
this product. Please consult with a qualified auto technician before
attempting to perform any work you are not qualified to do. Automobiles can be
hazardous to work on; be sure to take all necessary safety precautions.
Failure to do so may result in property damage or personal injury. Certain
motor vehicle standards and performance requirements may apply to your motor
vehicle (such as Federal Motor Vehicle Safety Standards by the National
Highway Traffic Safety Administration). Be sure that your work is performed in
accordance with such standards and that you do not disable any motor vehicle
safety feature.
© 2023 No reproduction in whole or in part without prior written approval. BrakeHydraulicHose_Tech-Note