DORMAN 599-218 Front Climate Control Module Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 599-218 Front Climate Control Module
Specifications
- Model: 599-218
- Type: Climate Control Module
- Compatible with: Vehicles with and without rear defrost
Product Usage Instructions
Installation
- Locate the bag with the button covers provided in the box.
- Choose the desired cover (Blank or Rear Defrost).
- Place the selected cover over the button opening.
- Press down firmly and evenly until it clicks into place.
Removal of Button Cover
- Insert a small screwdriver into one of the 2 slots along the bottom of the button cover.
- Gently pry up until it becomes loose.
- Repeat on the second slot to completely remove the button cover.
NOTE: To prevent markings or damage to the housing, a thin cloth or tape can be placed on the faceplate of the module where prying will occur
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
Cadillac Escalade (EXT) 2002, Chevrolet Avalanche 1500/2500 2002, Chevrolet Silverado/Sierra 1500/3500 2002–1999, Chevrolet Suburban 1500/2500 2002–00, GMC Yukon (XL 1500/2500) 2002–1999, Chevrolet Tahoe 2002–1999
USING INSTRUCTION
- This climate control module consolidates OEM modules that are used in vehicles with and without rear defrost. To install the button cover, locate the bag with the button covers that are provided in the box and simply place the desired cover (Blank or Rear Defrost) over the button opening and press down firmly and evenly until it clicks into place.
- If the button cover needs to be removed, insert a small screwdriver into one of the 2 slots along the bottom of the button cover and gently pry up until it becomes loose.
- Repeat on the second slot to completely remove the button cover.
NOTE : A thin cloth or tape can be placed on the faceplate of the module where prying will occur to prevent markings or damage to the housing.
Disclaimer:
Even though every attempt is made to ensure this information is complete and
accurate, it is impossible to account for all possible circumstances or
situations. Please consult with a qualified auto technician before attempting
to perform any work you are not qualified to do. Automobiles can be hazardous
to work on; be sure to take all necessary safety precautions. Failure to do so
may result in property damage or personal injury. Certain motor vehicle
standards and performance requirements may apply to your motor vehicle (such
as Federal Motor Vehicle Safety Standards by the National Highway Traffic
Safety Administration). Be sure that your work is performed per such standards
and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approval.
FAQ
- Q: Can I use this climate control module in any vehicle?
- A: This module is designed for use in vehicles with and without rear defrost. Please ensure compatibility with your vehicle before installation.
- Q: How do I clean the button covers?
- A: Use a soft cloth dampened with mild soap and water to gently clean the button covers. Avoid using harshchemicals or abrasive materials to prevent damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>