XINWU TECHNOLOGY P10 Battery IP Camera User Manual
- June 1, 2024
- XINWU TECHNOLOGY
Table of Contents
User’s manual
battery ip camera
- Thank you for purchasing this product. Please read this manual carefully before using it and keep itina safe place.
Client downloading
Please scan the lower (right) QR code, download and install the”v720″ app, or search for “V720” in the mobile phone application store to download and install.
Product icon
Adding Device
WiFi Mode
-
Openthe “V720″ APP and allow the APP to useall permissions.
-
According to the guidance in the figure below, short press the “ON” power-on button, wait for the blue indicator to light up and then long press the “MODE” network key to reset the device blue indicator light flashes rapidly.
-
The APP interface willdisplay “Device awaiting addition” .Select “Add Device” and follow the prompts to bind the device. (If this message does not appear, click onthe “+” inthe upper right corner and follow the prompted steps).
-
Device network: select or enter a 2.G band WIFI account and fill in the password, click “Next”, make sure it is correct and then bind the device.
Note: 5G Wi-Fi of dual channel router usually has “-5g” mark after the name. Remember NOT to select this Wi-Fi for device binding.
For example :
AP Mode
-
Openthe “V720″ APP and allow the APP to use all permissions.
-
According to the guidance in the figure below, short press the “ON” power-on button, wait for the blue indicator to light up and then long press the “MODE” network key to reset the device blue indicator light flashes rapidly.
-
Mobile phone turn on the WIFI and connect to the WIFI] hotspot starting with “NAX_”.
-
Return tothe “v720” app and refresh dropdownlist, when the device displays that means the short-range mode connection is successful.
SD card recording instructions
SD card recording requires the purchase of SD card insertion, only supports FAT32 format SD card, the maximum capacity of 128G. recognizes the card and automatically records, automatically overwrites the original video and cyclic recording after the storage is full.
Common Questions andPrecautions
- The device only supports 2.4G networks. (When configuring the network, please do not choose the 5G network. Generally, 5G WiFi network names containthe “5G” designation).
- Device sharing: The device can be shared with multiple users.
- In AP mode, remote monitoring is not possible. Each time you view the monitor, the mobile phone needs to be approximately 3 meters from the camera. Connect to the WiFi beginning with ‘Nax’ , then return to the APP to watch. The inability to access the internet while your phone is connected tothe camera’ s WiFi isnormal. Disconnecting the WiFi connection will resolve this.
- The applicable working temperature of this product is -20°C ~50°C. Please do not use this product in an environment where the temperature is too high or too low.
- This product is a precision electronic product. Please do no product in an environment where is excessively wet or may causet use this water to enter the product.
- To better use this product, please avoid the front and side of the lens close to the glass, white wall and other reflflective objects, in order to avoid the picture is bright near and dark in the distance or whitish.
- Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible ina location with better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affffect the signal.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>