hDrop Gen 2 Hydration Wearable Sensor User Manual

June 14, 2024
hDrop

hDrop Gen 2 Hydration Wearable Sensor

Product Information

Specifications

  • Product Name: hDrop Gen 2
  • Model: hDrop
  • Revision History:
    • Title: Initial
    • Date: 20230510
    • Revision By: Approval
    • Description: Initial

Getting Started

Create your profile
In order to create personalized results, you need to enter some personal information. Follow the steps below to create your profile:

  1. Open the hDrop Gen 2 Manual.
  2. Navigate to the “Create your profile” section.
  3. Enter the required personal information.

Pairing and initial test

After creating your profile, you need to pair the hDrop device with your smartphone and perform an initial test. Follow the steps below:

  1. Make sure your smartphone’s Bluetooth is enabled.
  2. Open the hDrop Gen 2 Manual.
  3. Navigate to the “Pairing and initial test” section.
  4. Follow the illustrated screens to pair the hDrop device with your smartphone.
  5. Run the first test to ensure proper functionality.

Start an activity

Once you have successfully paired the hDrop device and completed the initial test, you can start an activity. Follow the steps below:

  1. Open the hDrop Gen 2 Manual.
  2. Navigate to the “Start an activity” section.
  3. Choose the desired activity from the available options.
  4. Follow any additional instructions provided to ensure accurate tracking of your activity.

End the workout

To end a workout, follow these steps:

  1. Ensure that you have completed your activity.
  2. Locate the finish button at the bottom of the screen on the hDrop device.
  3. Press the finish button to end the workout.

Frequently Asked Questions (FAQ)

Q: How can I find the FCC regulatory information for hDrop?
To locate the FCC regulatory information for hDrop, please follow these steps:

  1. Open the hDrop APP on your smartphone.
  2. Scroll to the bottom of the page.
  3. Look for the FCC ID and click on it.
  4. A page with the FCC regulatory information will be opened.

Revision History

Title Date Revision By Approval Description
Initial 20230510 Initial

Getting Started

Create your profile
Some personal information must be entered in order to create personalized results:

hDrop-Gen-2-Hydration-Wearable-Sensor-1

hDrop-Gen-2-Hydration-Wearable-Sensor-2

Pairing and initial test
After creating your profile, it is necessary to perform the pairing process with the hDrop and run the first test. The following screens illustrate how to do it.

hDrop-Gen-2-Hydration-Wearable-Sensor-3

hDrop-Gen-2-Hydration-Wearable-Sensor-4

Start an activity

End the workout
To end a workout, you must press the finish button located at the bottom of the screen.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and meets applicable limits for radio frequency (RF) exposure.

To locate the FCC regulatory information: Please open the hDrop APP, the FCC ID will be on the bottom of the page. Click on the FCC ID, a page with the FCC regulatory information will be opened.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals