imperii RR FIERRO SmartBand Ovulation Control IP68 NEBUS Instruction Manual

Basic Layout of Wristband

Charging Description of Wristband
Charge the wristband before use
Charging Voltage: 5V
Charging Time: About 2 hours

Wristband Interface and Function Description

1. Power ON/OFF©
   Long press the contact button to turn power on/off

2. Time, data and period ®
   For first use, please connect it with APP on phone, so as to synchronize the correct time, date, and period.
   

3. Sport mode® @
   Long press the button to enter sport mode, then the heart rate switches to dynamic heart rate automatically. In this mode, shortly press the touch button to pause. To exit this tab, long-press the pause icon , after and menu is displayed, long-press IS to continue or to exit.
   In this mode, you can view the current heart rate value, running distance, calories, and running time. This heart rate will not be stored to APP.
   

4. Step count ®

5. Distance ®

6. Calories ©

7. Blood Pressure Testing ®
   Press the touch button to switch to blood pressure interface and the blood pressure icon will start to flash (please wait patiently on this interface until the measurement results are displayed).
   The manual measurement result on wristband will not be stored in APP. If you need to save, please go to APP terminal to perform manual test or turn on the real-time blood pressure monitoring, so as to monitor the blood pressure in real-time.
   Real-time blood pressure monitoring is performed once every 10 minutes by default and the results will be saved and displayed on the APP chart.
   

8. Heart Rate Testing ®
   As switching to heart rate interface, the corresponding icon will flash (Be sure to wear the wristband 1CM behind the ulnar stylo process of wrist ulna and  make sure the sensor is firmly attached to your skin) until the result is displayed. This single manual measurement will not be saved to APP. If you turn on  real-time heart rate from APP terminal, the wristband will calculate the average every 30 minutes and save the data to the APP.

9. Sleeping Monitoring ©
   The wristband measures sleeping condition automatically by default, and you can view the historical sleeping data from APP terminal.

Bluetooth Matching

1 . Turn on the wristband
2.Turn on the phone Turn on the phone
3.Scan the following QR code or search” H band” APP from APPle store/Google play store

https://www.vphband.com/hband/hband.html
Android/iOS
4.Turn on the APP to click the connecting device. From the connecting device list, select the corresponding Bluetooth name “FIOC”. After connection is successful, the wristband will synchronize the time, date, period, etc.

Bluetooth Disconnection

1. Disconnect the Bluetooth from APP
2.Turn off the phone background operation
3.Ignore or delete the matched Bluetooth from Bluetooth screen in Phone Setting menu

APP Function and Interface Description

1.Installation
After installation is finished, input the correct personal information as required and match it with wristband
2.Data Panel
Step amount: View the total of steps, calories, distance, etc. Sleeping: View the history sleeping data (deep, shallow, waken-up time, etc.)
Heart rate:
(1) View the average heart rate throughout the day. It can be automatically detected by the wristband and recorded once every 30 minutes.
(2) You also can click the icon to test heart rate manually from APP terminal. When the measured result is displayed, click the icon manually to stop. This result will not be saved in APP.

Blood pressure:

(1) When you turn on the real-time blood pressure, you can view the blood pressure data throughout the day from this interface. The blood pressure will be measured automatically once every 10 minutes.

(2) Click the icon . to perform single manual blood pressure test (please remain still until the result is displayed).  After the test is finished, you can select to save the result or not. There are two modes in this test interface: normal mode and private mode. If you need to use private mode, please set the private blood pressure reference value from APP setting.

Running Mode

1. GPS exercise
Click the start button to do exercise and allow to get location. During the movement, you can view the track, time, speed, speed setting, and calories in real-time.
2.Wristband exercise
Click the start button, then the wristband will enter sport mode automatically, in which you can view real-time heart rate, running time, calories, and steps.  Running which starts by clicking here will be saved automatically in APP

Setting

My device: Click the connecting device. The following functions can be set by clicking the connected device (a) Information remind: Select ON to enable each remind function
(b)Clock setting: Set the clock time
(c)Long-time seating remind: Set the remind time and interval
(d)Heart rate alarm: Set the heart rate remind upper limit
(e) Display illumination as turning wrist: Set display illumination function as raising hand
(f)Binding device: Synchronize the data to APP as turning on
(g)Blood pressure private mode: Turn on and set private blood pressure reference level.
(h) Switch setting: 1. Wearing test 2. Heart rate auto-monitoring (real-time heart rate) 3. Blood pressure auto-monitoring (real-time blood pressure) 4. Find phone  5. Stopwatch function (Once the stopwatch function is turned on, the wristband will add one stopwatch interface. Long press this interface to enter and short  press this button to start or stop the stopwatch function, then long-press this button to

(i)Take photos: Click the wristband button to take photos by controlling phone remotely
(j)Countdown: Set the countdown time and set to display it on wristband or not.
(k) Reset password: The matching password of wristband can be reset to prevent other phones from pairing with the wristband
(1) Screen style setting: There are 3 options

(m) Firmware update: Update the wristband firmware
(n) Clean data: Reset the wristband to factory setting running target: Set every day running target Sleeping target: Set sleeping target according to your personal situation
Unit setting: Select British or metric units
WeChat running: Please follow the instructions to connect WeChat running

Note: The green lights of this wristband and sensor will light up every 10 minutes, which are to detect sleeping condition, real-time blood pressure, and real-time heart rate data. This is a normal phenomenon. If you want to turn it off, please turn off the wearing detection, automatic blood pressure, and automatic heart rate  in Switch Setting of APP

Parameters
Main chip: Nordic N52832
Screen 0.96” IPS color screen
Battery: 90mAh
Water-proof level: IP68
Standby time: 5 days
Supported phone system: IOS8.0 or higher, Audroid4.4 or higher
Heart rate detection: Support
Blood pressure detection: Support
Display Illumination as turning wrist: Support
Bluetooth version: 4.0

TECHNICAL SERVICE : http://www.imperiielectronics.com/contactenos
Importado por:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC

imperii RR FIERRO SmartBand Ovulation Control IP68 NEBUS Instruction Manual – Download [optimized]
imperii RR FIERRO SmartBand Ovulation Control IP68 NEBUS Instruction Manual – Download
imperii RR FIERRO SmartBand Ovulation Control IP68 NEBUS Instruction Manual – OCR [PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>