DORMAN 13778 Keyless Entry Remote Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 13778 Keyless Entry Remote
Product Information
Specifications:
- Product Model: 13778
- Product Type: Keyless Entry Remote
- Compatibility: Works with vehicles equipped with OBD II port
Product Usage Instructions
General Tech Tips:
Programming Instructions:
- STEP 1: Turn the vehicle ignition key to the ON position without starting the engine (Key-On Engine-Off–Position 1).
- STEP 2: Insert the programmer into the OBD II port locatedunder the steering column near the pedals.
- STEP 3: Wait for 10 seconds then press the LOCK and UNLOCK buttons on the key fob simultaneously for three seconds. Press the LOCK button for two seconds.
- STEP 4: Repeat Step 3 for all additional remotes.
- STEP 5: Once all key fobs have been programmed, turn theignition key off and remove the programmer from the OBD II port.
- STEP 6: Wait for two minutes and verify that each key fob functions properly. If programming was unsuccessful, restart theprocedure.
If you still need help, please call our Technical Support team for assistance from our team of certified automotive experts at 1-800-523-2492.
FAQ
Q: What should I do if my key fob is not working after programming?
A: If your key fob is not working after programming, please restart the programming procedure and ensure that you follow each step accurately. If issues persist, contact our Technical Support team for further assistance.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
REMOVAL/INSTALL OF KEYLESS ENTRY REMOTE (13778) Chrysler 2005–00, Dodge 2005–00, Jeep 2004–00, Plymouth 2001–00
GENERAL TECH TIPS
- DISCLAIMER: All currently programmed and new remotes must be reprogrammed to your vehicle. Please have all remotes in hand at time of programming.
- Due to the programming process being sensitive to voltage drops, it is recommended that a battery charger is hooked up to the vehicle before \beginning the programming process.
Programming Instructions
- STEP 1: Turn vehicle ignition key to ON position, without starting engine (Key-On Engine-Off—Position “1”).
- STEP 2: Insert programmer into OBD II port, located under steering column, near pedals
- STEP 3: Wait 10 seconds then press the LOCK and UNLOCK buttons on the key fob simultaneously for three seconds. Press the LOCK button for two seconds.
- STEP 4: Repeat Step 3 for all additional remotes.
- STEP 5: When all key fobs have been programmed, turn ignition key off and remove programmer from theOBD II port.
- STEP 6: Wait two minutes and verify each key fob functions properly. If programming was unsuccessful, restart the procedure.
Contact
Still need help?
Please call our Technical Support team for assistance from our team of certified automotive experts.
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approva