AutoSolo Universal Wheel Clamp and Magnetic Adapter Instruction Manual
- June 1, 2024
- AUTOSOLO
Table of Contents
AutoSolo Universal Wheel Clamp and Magnetic Adapter
Wheel Clamp Instructions
Remove plastic covers.
Adjust clamp legs with hook side facing inwards (where wheel would be).
Adjust clamp length to be slightly longer than rim.
Place top clamp hooks over top lid of rim.
Tighten clamp so bottom clamp hooks grip bottom lip of rim.
Wheel clamp is attached.
Additional Instructions
Mounting Adapter Plate
Rotate spindle counterclockwise to loosen adapter plate lock. Insert adapter plate and tighten spindle by rotating clockwise.
Loosen or Tighten Plate
Note: Ensure the adapter plate’s protruding metal piece is inserted in one of the four slots near the bore hole.
Install Knob
Insert knob into rotary handle by placing the hex nut from the knob behind the screw hole and screw in the knob into the hex nut.
Customer Support
autosolotools.com 
support@autosolotools.com 415.849.0275
