Lasko T48401 Works with Alexa 48” Oscillating 4-Speed Tower Fan User Guide

: June 5, 2024
: Lasko

Table of Contents

Zero Touch Setup
User Guided Setup with Barcode
User Guided Setup without Barcode
Factory Reset
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

T48401 Works with Alexa 48”
Oscillating 4-Speed Tower Fan
User Guide

Zero Touch Setup

Plug in Alexa enabled Fan.
Say “Alexa, discover devices” to a qualifying Amazon device that is connected to your WiFi network.
This will establish a connection to the new device, and automatically share the WiFi credentials it is using as well as add the new device to the user’s list of devices. This feature is only available one time when a product is purchased on Amazon, and the user has selected “Link to my Alexa account to simplify setup”.

User Guided Setup with Barcode

Download the Alexa App (Google Play Store or Apple App Store), and follow instructions in the App to log in or create an account.
Plugin your Lasko Fan, and press Power Button ( ) to turn it on.
Open the Alexa App on your phone or tablet, and navigate to the App’s home screen. From here select the tab at the bottom labeled “Devices”.
Press the “+” button, then select “Add Device”.
On the next screen, select the type of device that you would like to add (Fan).
You will then be asked to select the brand of product. Scroll through the list and select Lasko.
Follow the instruction on the screen until you can select “Scan Barcode” (note: there will be an example of the barcode on the select “Scan Barcode” screen).
Hold down Power ( ) and Nighttime ( ) Buttons (5 seconds) until the product display begins to rotate.
Use your smartphone/tablet’s camera to scan the 2d barcode on the rear of your Lasko product.
Your Lasko product should be connected shortly after scanning the barcode. Follow instructions on your smartphone/tablet’s screen to complete setup, and begin using your Lasko product.

User Guided Setup without Barcode

Download the Alexa App (Google Play Store or Apple App Store), and follow instructions in the App to log in or create an account.
Plug in Lasko Fan.
Open the Alexa App on your phone or tablet, and navigate to the App’s home screen. From here select the tab at the bottom labeled “Devices”.
Press the “+” button, then select “Add Device”.
On the next screen, select the type of device that you would like to add (Fan).
You will then be asked to select the brand of product. Scroll through the list and select Lasko.
Follow the instructions on the screen until you can select “Don’t Have a Barcode?” (Note: There will be an example of the barcode on the screen where you select this option).
Select “Don’t Have a Barcode?”.
Hold down Timer ( ) and Nighttime ( ) Buttons (5 seconds) until the product display begins to rotate.
Your Lasko product should be connected shortly after activating the connection process of inputting specific buttons on the product. Follow instructions on the screen to complete setup, and begin using your Lasko product.

Factory Reset

To reset the product to the factory settings (the product will forget WiFi credentials, and no longer be controlled by the Alexa App or by Alexa voice commands) while the product is turned off hold the Power ( ) and Nighttime ( ) Buttons for 5 seconds.
When this is a feature activated, the product will automatically be put into setup mode, and the display will begin to rotate in a clockwise manner. The product can still be operated by the physical buttons on the product.

Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates