ofinto TA-ELE-01 Electrically Height Adjustable Office Desk User Manual

: June 9, 2024
: ofinto

Table of Contents

DELIVERY CONTENTS
ASSEMBLY
USE
CORRECT SETUP
PRODUCT SPECIFICATIONS
SAFETY INSTRUCTIONS AND HAZARD WARNINGS
TROUBLESHOOTING
CARE INSTRUCTIONS
DISPOSAL
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ofinto TA-ELE-01 Electrically Height Adjustable Office Desk User Manual

Thank you for choosing the ofinto electric height-adjustable desk Elevate! It provides you with the optimal conditions for active, dynamic sitting and healthy working.
The height-adjustable office desk Elevate is the perfect complement to an ergonomic chair and allows you to have the optimal desk height both when sitting and standing. However, only if your desk is correctly assembled, configured and customized can it fulfill all ergonomic aspects. This User Manual is intended to help you with these settings.

Your feedback is important to us! Please leave us your rating for the ofinto desk Elevate online at www.ofinto.ch. If you have any questions, comments or suggestions for improvement, please contact us at any time via our online customer service.

And now, enjoy standing and sitting!

DELIVERY CONTENTS

COMPONENTS & TOOLS

A. Support beam
B. Legs
C. Feet
D. Brackets
E. Table top (delivered separately)
F. Power unit
G. Power unit
H. Control panel
I. Hey Key 4mm
*J. Screws M612mm**
*K. Screws M614mm**
L. Split lock washers
M. Washers
N. Rubber cushioners
O. Plastic pad
*P. Screws ST4.825mm**
*Q. Screws ST4.819mm**
*R. Screws ST3.519mm**
S. Cable holder, self-bonding

ASSEMBLY

For the assembly of the table top you will need a Phillips screwdriver of size Ph-2 (not included).

Step 1:
Assembly

Step 2:
Assembly

Step 3:
Assembly

Step 4:
Assembly
Tighten the screws firmly!

Step 5:
Assembly

Step 6:

Assembly

Step 7:
Assembly
Step 8:

Make sure that the power unit F is securely screwed to the tabletop and cannot move!
Use the self-bonding cable holders S as desired to tuck away the control panel cables.

USE

INITIALIZATION

When the ofinto Elevate is used for the first time, the system must be initialized. To do this, simultaneously hold down the ^ and ^ keys until the table has reached its lowest possible height and you hear a short beep (takes about three seconds).

HEIGHT DISPLAY

The display of the control panel shows the current height of the table top. This display works both in centimeters and inches. To change the unit system, press and hold the 1 , 2 and M keys simultaneously until «C-E» flashes on the display. Then, press the 1 key for centimeters or the 2 key for inches.

ADJUSTING THE TABLE HEIGHT
The control element allows you to set the table height using the ^ and ^ keys. On the display, you can see the current height of the table top.

MEMORY FUNCTION

You have the option of saving up to four table position for later use. To do this, use the arrow keys to set the desired height and then press and hold the M key until the number on the display starts to flash. Then, press the 1 , 2 , 3 or 4 key to save the current table position under this key., um die die Höhe unter dieser Taste zu speichern. The height remains stored even when the table is temporarily without power.

CORRECT SETUP

You can adjust the height of your office desk to your individual needs. Correct desk height adjustment ensures that you maintain proper back posture and do not put unhealthy stress on your wrist, and neck and shoulder muscles. If your desk is set too low, your back tends to take on a rounded posture resulting in pressure on your wrists. In turn, setting your desk too high tends to push your shoulders upward, which can lead to neck and shoulder tension. A correct setting, on the other hand, sends the correct and vital straightening impulses to your back.

The correct desk height when sitting is determined by your own individual body size. The starting position for determining the correct desk height is an upright sittingposture. Adjust the desk height to a position where both shoulders are horizontal in a relaxed position, while your forearms rest on the desk or slope very slightly down toward your wrist. The arm angle should be at least 90°.

If you own an optimally set up office chair with armrests, then you can alternatively also use this chair to determine the correct desk height. In this case, the correct table height automatically results from the height of the armrests. The armrests and tabletop should form an even and continuous plane.

PRODUCT SPECIFICATIONS

SPECIFICATIONS

Product weight:

| approx. 34 kg (without table top)
---|---

Max. loading:

|

125 kg

Height:

|

min. 66 cm max. 131 cm

Lifting speed:

|

40 mm/s

Sound level:

|

<50 db

Input:

|

100-240 V/ 50/60 Hz / 4.0 A

Standby power consumption:

| 0.1 W

Duty cycle:

|

10%, max. 2min on, 18min off

Material table legs:

|

2mm thick steel

Material table top|

MFC, laminated, emission class E1, 100% FSC certified

FUNCTIONS

Anti-collision system
Overuse protection to prevent overheating
Memory function for up to four table positions
Dual-motor system made by Taiwan Timotion
Three segments legs for increased stabilityCertified according to safety standards UL 962, ANSI/ BIFMA X5.5: 2014, BIFMA G1: 2013, RoHS 2011/65/EU, EC 2004/108/EC and CE

SAFETY INSTRUCTIONS AND HAZARD WARNINGS

The height adjustable desk must only be used with the power supply provided. Do not use the table if the power cord or plug is damaged, the table does not operate properly, has been dropped or tipped over and damaged, or has gotten wet.

Proceed carefully during installation and follow these installation instructions. Improper assembly, as well as failure to comply with or disregard the instructions and warnings regarding the use of this product may result in damage to property and/or injury.

Repairs and modifications to the table as well as the opening or replacement of the electrical components may only be carried out by ofinto or by qualified personnel authorized by ofinto ag.

The desk may only be used indoors in dry conditions and in an environment free of moisture or high humidity. Protect the electronic components of the desk from exposure to fluids.

Use the height adjustment function of the ofinto Elevate for no longer than 2min per 20min to prevent the motors from overheating.

Because the ofinto Elevate office desk is height adjustable, it is essential to have free space/safety clearances in both the height adjustment zone and surrounding the desk. This is to ensure that adjusting the desk height does not damage surrounding objects or the desk itself, or cause injury to the user or others. Before every operation, ensure that there is an all-round safety clearance of at least 25mm between the table top and other objects. Because of the risk of injury or damage, do not position the ofinto Elevate office desk flush with similar or other tables.

The ofinto Elevate has automatic collision protection. Under certain conditions, the collision protection may not function properly. That is, if the collision occurs during initialization, during the first second of operation or over too long a period of time, i.e. with a soft or moving object.

Before changing the desk height, always check that the height adjustment zone is unobstructed both above and below the table top. Otherwise, the desk and the objects standing in the way suffer damage. When operating the height adjustment function, make sure that no persons are within the height adjustment range, otherwise injuries such as crushing may occur.

Check that cable connections to electronic devices on the desk are of sufficient length. Do not connect cables to devices on other tables or shelves. Cables must not be pinched or crimped.

TROUBLESHOOTING

ERRORCODES

Code	Meaning	Signal	Solution
E00	Initialization not complete		Initialize the device
E01	Overheating protection	3 beeps	Activates automatically after >300

seconds of use of the system. The system can be used again after 75 seconds.
E02| Imbalance of >10mm| 2 beeps| Initialize the device
E03, E04| Collision| | The table moves back 40mm and can then be used again. Remove the obstacleIn case of recurring error messages:

Make sure that the power unit 0 is screwed on tightly and that it cannot move.
Make sure that the table is on level ground.

CARE INSTRUCTIONS

CLEANING

A vacuum cleaner can be used to remove dust and lint from the desk feet and the table top. Use a damp soft cloth and a mild, neutral detergent to treat stains. Use a dry cloth to remove dust and dirt from the power unit.

Do not use aggressive cleaning agents, hard brushes, sharp or metallic cleaning objects such as knives, metal sponges and the like. These can damage the surfaces.

MAINTENANCE

Periodically remove dust and dirt from the table frame, especially from the guiding tubes.
Regularly check all screws, plug connections and cables for tightness.

DISPOSAL

Keep packaging materials away from children and recycle them in the interest of environmental protection. Add cardboard and paperboard to the waste paper, foils to the recyclable material collection.

When the desk is no longer of use, contact your local waste disposal service for information on environmentally friendly disposal. By disposing of the desk separately, you can help reduce waste and reduce potential negative impact on human health and the environment.