Mi-T-M Pressure Pressure Washer User Manual
- October 30, 2023
- Mi-T-M
Table of Contents
Mi-T-M Pressure Pressure Washer
Product Information Mi-T-M Pressure Washer
The Mi-T-M Pressure Washer is a high-quality product designed to cater to all your cleaning needs. It comes with a warranty that covers all parts except for normal wear parts such as pump packings, spray nozzles, pump valves, detergent valves, quick couplings/screw connects, and O-rings. The warranty period varies from 90 days to five years depending on the part.
Warranty Coverage Periods
- High Pressure Pump : Five (5) Years from the date of original purchase
- Cart Assembly Plumbing : Two (2) Years from the date of original purchase
- GFCI and Selector Switch : One (1) Year from the date of original purchase
- Trigger Gun/Wand Unloader Valve, High Pressure Hose
- Strainer/Filter : Ninety (90) days from the date of original purchase
STATEMENT OF WARRANTY
Mi-T-M warrants all parts, (except those referred to below), of your new pressure washer to be free from defects in materials and workmanship during the following periods
- For Five (5) Years from the date of original purchase: High Pressure Pump
- For Two (2) Years from the date of original purchase: Cart Assembly Plumbing
- For One (1) Year from the date of original purchase: GFCI Selector Switch
- For Ninety (90) days from the date of original purchase:
- Trigger Gun/Wand High Pressure Hose
- Unloader Valve Strainer/filter
Defective parts not subject to normal wear and tear will be repaired or replaced at our option during the warranty period. In any event, reimbursement is limited to the purchase price paid.
Exclusions
The warranty does not cover normal wear parts, parts damaged due to normal wear, misapplication, misuse, operation at other than recommended speeds, pressures or temperature. Parts damaged or worn because of the use of caustic liquids or by operation in abrasive or corrosive environments or under conditions causing pump cavitation are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty. The use of other than genuine Mi-T-M repair parts will void warranty.
- The motor is covered under separate warranty by its respective manufacturer and is subject to the terms set forth therein.
- Normal wear parts:
- Pump Packings Spray Nozzles
- Pump Valves Detergent Valves
- Quick Couplings/Screw Connects O-rings
- This warranty does not cover parts damaged due to normal wear, misapplication, misuse, operation at other than recommended speeds, pressures or temperature. Parts damaged or worn because of the use of caustic liquids or by operation in abrasive or corrosive environments or under conditions causing pump cavitation are not warranted. Failure to follow recommended operating and maintenance procedures also voids warranty.
- The use of other than genuine Mi-T-M repair parts will void warranty. Parts returned, prepaid to our factory or to an Authorized Service Center will be inspected and replaced free of charge if found to be defective and subject to warranty. There are no warranties which extend beyond the description of the face hereof. Under no circumstances shall Mi-T-M bear any responsibility for loss of use of the unit, loss of time or rental, inconvenience, commercial loss or consequential damages
Product Usage Instructions
Before using the Mi-T-M Pressure Washer, make sure to read the operator’s manual carefully and follow all safety instructions. Here are some basic usage instructions:
- Check all connections and fittings before use to ensure they are tight and secure.
- Fill the fuel tank with clean, fresh gasoline and check the oil level before starting the engine.
- Connect the high-pressure hose to the spray gun and the pump outlet.
- Turn on the water supply and squeeze the trigger to release any trapped air in the pump and hose.
- Start the engine and let it warm up for a few minutes before use.
- Adjust the pressure and spray pattern according to your cleaning needs.
- After use, turn off the engine, release pressure from the system, and disconnect all hoses and fittings.
- Clean the unit thoroughly and store it in a dry, well-ventilated area.
Remember to follow all recommended operating and maintenance procedures to ensure optimal performance and longevity of your Mi-T-M Pressure Washer. If you encounter any issues with your pressure washer, contact customer service for service or warranty consideration. The customer service number is 563-556-7484 / 800-553-9053 / Fax 563-556-1235. Customer service is available Monday – Friday from 8:00 a.m. – 5:00 p.m. CST.