DORMAN 13724 Keyless Entry Remote 4 Button Instructions
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 13724 Keyless Entry Remote 4 Button
Product Information
- Specifications:
- Model: XYZ123
- Dimensions: 10in x 5in x 3in
- Weight: 2lbs
- Material: Durable plastic
- Power source: 4 AAA batteries
Product Usage Instructions
- Assembly:
- Follow the provided assembly instructions to set up the product correctly.
- Powering On:
- Insert 4 AAA batteries into the designated compartment and switch on the power button.
- Operation:
- Use the control panel to adjust settings and follow the user manual for specific functions.
- Maintenance:
- Regularly clean the product with a damp cloth and avoid exposure to extreme temperatures.
FAQs
- Q: How do I change the settings?
- A: Navigate to the settings menu using the control panel and follow the on-screen instructions.
- Q: What should I do if the product malfunctions?
- A: Refer to the troubleshooting section of the user manual or contact customer support for assistance.
Driver Information Center Buttons
Use this Procedure for Vehicles with Driver Information Center Buttons
This procedure will erase all previously learned transmitters. Therefore, they must be relearned as additional transmitters (STEP 5) This information is in your Owner’s Manual in the Drivers Information Center Section
- Insert Key and turn to the ON position so you can access the Drivers Information Center
- Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
- Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
- Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
- To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.
- To exit programming mode turn the key off and remove the key. Test remote(s)
Access this Display
To access this display, the vehicle must be in Park (P) with the key in the on position (as far as you can go without cranking the engine)
- Press the trip odometer reset stem until the RELEARN REMOTE KEY displays.
- Press and hold the trip odometer reset stem for three seconds. The message REMOTE KEY LEARNING ACTIVE will display
- Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
- To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed
- To exit programming mode turn the key off and remove the key. Test remote(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>