SUPERATV Kawasaki Teryx KRX 1000 Rear Windshield Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
INSTALLATION INSTRUCTIONS
Rear Windshield: for Kawasaki Teryx® KRX™
2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
– SuperATV does not recommend keeping Windshield installed while
transporting on an open air trailer. Remove or secure with straps.
– This item is not returnable if the protective film has been removed.
– Test fit to the cage to confirm fitment before removing film.
Windshield Cleaning:
– Do not use Rain-X®, Plexus® or any other protector, wax, or polish.
– Do not use window cleaning fluids (Windex, 409, etc) or any solvents
(gasoline, denatured alcohol, acetone, etc).
– Never use abrasive cleaners, abrasive pads, or gritty cloths.
– Do not use a windshield wiper blade or install a motorized windshield wiper
– Never use razor blades, scrapers, squeegees, brushes, etc.
– Keep pressure washer nozzle a minimum of 8″ away from Screen Printed
Windshields.
- Thoroughly rinse Windshield to float off dirt and mud.
- Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand washing soap can also be used.
- To prevent water spots, use a chamois to blot Windshield dry.
Use hand tools only when assembling.
Do not use power tools.
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
Need help with your installation?
sales@superatv.com www.superatv.com
8:00am – 8:00pm EST M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Read instructions and view illustrations before beginning.
Thank You For Choosing
© 2019 SuperATV.com®. All Rights Reserved. IN- RWS-K-KRX / IN-RWS-K-KRX-V 11/13/2019
Windshield
90° Seal Seal Strap x 4
Inside Bracket x 2 Clamp x 2 Bracket – R
Bracket – L Side Windshield x 2
repeat for opposite Duct
– From inside machines, loosen rearmost Roof Straps if applicable.
– Install Seals to Windshield in locations shown.
Seal
90º Seal
Bulb to always face towards vehicle
Use hand tools only when assembling.
Do not use power tools.
– When assembling, do not tighten hardware completely.
– Install Bracket – R to Side Windshield with hardware shown. Repeat for
Bracket – L installation.
– Install Seal as shown.
A Bracket – R
B Side Windshield
Seal
Rubber must face Windshield when installing
– Install Side Windshields to Windshield with hardware shown.
– Place onto Cage and secure with Clamps and Straps as shown.
– Secure Inside Brackets to Windshield and Wall with hardware shown.
– Tighten all Straps, Clamps, and hardware.
– Reinstall Cover and Ducts.
IN-RWS-K-KRX / IN-RWS-K-KRX-V
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>