DORMAN 901-649R Front Driver Side Remanufactured Power Window Switch Installation Guide
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 901-649R Front Driver Side Remanufactured Power Window Switch
Specifications :
- Model Number: 901-649R
- Product Type: Bezel Removal Tool
- Compatibility: Door modules
- Material: Durable plastic
- Color: Black
Product Usage Instructions
Installation:
- Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part.
- If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician.
- Pay special attention to all cautions and warnings included in the shop manual.
- To remove the Bezel from the door module, follow these steps:
- Slide the included Bezel removal tool under one of the Top Clasps.
- While pressing down on the nearest button, gently lift the bezel removal tool until the Bezel Clasp disengages from the module.
- Continue using this method to disengage the remaining two claps on the same side.
- Once all three clasps have been disengaged, repeat this process on the opposite side of the door module.
Figures:
- The figures below illustrate the location of the six claps.
- No reproductions in whole or in part without prior written approval.
FAQ:
-
Q: Can this Bezel removal tool be used on any type of door module?
A: This Bezel removal tool is designed for use with specific door modules. Refer to the product manual for compatibility information. -
Q: Is the Bezel removal tool reusable?
A: Yes, the Bezel removal tool is durable and reusable for multiple installations.
TECH NOTES: INSTALLATION
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
Chevrolet Trailblazer 2009–06, Chevrolet Trailblazer EXT 2006
Bezel Removal Instructions
- To remove the Bezel from the door module, slide the included Bezel removal tool under one of the Top Clasps.
- While pressing down on the nearest button, gently lift the bezel removal tool until the Bezel Clasp disengages from the module.
- Continue using this method to disengage the remaining two claps on the same side.
- Once all three clasps have been disengaged, repeat this process on the opposite side of the door module.
- The figures below illustrate the location of the six claps.
Disclaimer
- Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
- ©2016 Dorman Products, Inc.
- No reproductions in whole or in part without prior written approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>