SHT4x SmartGadget Sensirion Multiple Function Sensor User Guide
- June 3, 2024
- SENSIRION
Table of Contents
SHT4x SmartGadget Sensirion Multiple Function Sensor
Sensirion’s Reference Design for SHT4x Sensors
- SHT40 humidity and temperature sensor
- Liquid Crystal Display (LCD) for humidity, temperature and dew point in °C and °F
- Bluetooth Low Energy (BLE) connectivity
- iOS and Android MyAmbience app available for remote access
- Data logging and export capabilities
- Detailed hardware design resources available
Introduction
The SHT4x Smart Gadget is a simple reference design circuit board which demonstrates the outstanding performance and ease of use of Sensirion’s SHT4x Humidity and Temperature sensors. It is equipped with a Liquid Crystal Display (LCD) showing humidity and temperature information. It also features a Bluetooth Low Energy (BLE) module allowing it to communicate with BLE capable devices like smartphones
Development Kit Contents
- Smart Gadget equipped with SHT40 sensor, LCD, push button and BLE capable MCU module, including battery, and supports.
- MyAmbience app for iOS and Android devices available for download in respective application stores.
- Detailed hardware design resources (PCB layout, BOM) available on GitHub.
Quick Start Guide
- Getting Started
- Remove battery foil
- Break apart supports and slide main board into slots
- Standalone Operation
- RH&T values are shown on the LCD
- Switch between RH and dew point by pressing the button
- Enabling/Disabling Bluetooth
- Bluetooth is enabled by default
- With Bluetooth enabled (indicated by Bluetooth symbol on LCD) the gadget is ready to pair with a Bluetooth device
- To disable/enable Bluetooth, press the button for >2 seconds
- Operation with MyAmbience App
- Download iOS or Android version of the MyAmbience app on your smartphone
- Open the App to automatically see nearby smart gadgets on your smartphone
Standard Operations
Assembly Instructions
Take the two supports and break them apart. Slide the circuit board into the
slots in the supports, with one support on each side of the Liquid Crystal
Display. Remove battery insulation foil. Optionally, the temperature can be
displayed in °F by pressing the button while inserting the battery.
Operating in Standalone Mode
This is the default operating mode. The measured values are shown on the Liquid Crystal Display. The upper line shows relative humidity or dew point temperature, while the lower line shows temperature. To switch between relative humidity and dew point display, briefly press the button. To display temperature values in °F, press the button while inserting the battery.
Operation in Bluetooth Mode
Bluetooth mode is enabled by default. When Bluetooth mode is enabled, the Bluetooth symbol in the display is shown and the SHT4x Smart Gadget is visible for master devices. It is then possible for a master device running MyAmbience app to establish a connection to the Smart Gadget. To change Bluetooth mode (disabling or enabling), press the button for more than 2 seconds. When turning on Bluetooth, the device ID (in the format XX:XX) is shown on the display for a short time. The battery life is improved when the Bluetooth mode is disabled.
Connecting to a Bluetooth Device
To connect the Smart Gadget to a smartphone, the smartphone must have MyAmbience app installed and Bluetooth enabled. For Android devices, location permission needs to be granted to the app for it to work, although the user location will not be used at any time. The app will automatically connect to surrounding Smart Gadgets with Bluetooth enabled. To display values from a specific Smart Gadget, the corresponding Smart Gadget has to be selected in the list of connected gadgets. The MyAmbience app can be downloaded from the corresponding app stores:
- iOS (Apple iTunes Store): https://apps.apple.com/app/sensirion-myambience/id1529131572
- Android (Google Play Store): https://play.google.com/store/apps/details?id=com.sensirion.myam
Using the Smart Gadget as a Datalogger
The Smart Gadget stores the measurement values in the built-in memory. The measurement interval can be defined through the app in the “Gadget Settings” menu. The Smart Gadget will log measurement values even if the Bluetooth connection is terminated. The stored values can be downloaded, displayed on the smartphone via the app, or exported as .edf files.
System Requirement
In order for a mobile device to work with the Smart Gadget it needs to be Bluetooth 4.0 (also known as Bluetooth Low Energy or BLE) compatible. This is the case for most Android devices from 2013 and newer, Apple iPhones generation 4S and newer, and Apple iPad generation 3 and newer. The Smart Gadget apps run with Android 4.4 or later and iOS 9.0 or later, respectively.
Important Security Advice
- Keep out of reach of children and pets (contains swallowable parts)
- If any part is swallowed, contact a physician immediately
- Battery type: CR2032
- Dispose of the battery properly (special waste)
- Smart Gadget operating temperature range: -10 to 60 °C
- The Smart Gadget is intended for indoor use
- The Smart Gadget is sensitive to electrostatic discharge (ESD) – please take precautions
MyAmbience Application
Device selection
When Bluetooth is enabled, MyAmbience automatically scans for devices to
connect with. When in the dashboard or plot panels, the devices which are
connected to the application are displayed as concentric circles with the
gadget’s name underneath. Press on a device to select it. The selected device
has a check mark on it and its information will be displayed in the dashboard
or plot panel.
When the gadget logo (concentric circles) is green, it means that the environmental conditions measured by the gadget are deemed comfortable. If a device was connected during the runtime of the application but the connection is subsequently lost, the device logo will appear as grey in the list.
Dashboard Panel
The dashboard view displays the summary information of the Gadget’s sensor
readings. The colors for each signal (yellow, green, blue) indicate the level
of environmental comfort based on the signal’s value. “Cold” temperatures
(<20°C) are indicated in blue, comfortable ones in green, and “hot” ones
(>26°C) in yellow. Low relative humidity (<40%RH) (i.e. dry air) is indicated
in yellow, comfortable relative humidity is indicated in green, and high
relative humidity (>60%RH) in blue.
On the upper-right corner, one can access the gadget settings to change the gadget name and the logging interval with which the gadget should internally store the measured environmental data for later download.
Plot Panel
In the plot panel it is possible to plot the evolution of the environmental
signals through time. One can change the signal to be displayed (temperature,
relative humidity, etc) and the time scale of the graph. On the top-right
corner, the Fetch Data button allows to download environmental data stored in
the gadget’s memory, according to the configured logging interval. The
downloaded data can then be displayed on a graph. Next to the Fetch Data
button, the Export button enables to save and send the recorded data as a .edf
file.
Menu Panel
In the menu panel, it is possible to find various information about the application and to load / export / manage logged data. Under the App Settings section, it is possible to change the temperature units (°C, °F, K), and to select other metrics to display (dew point, heat index, absolute humidity) in the Dashboard and Plot panel.
Hardware resources
Hardware design data (PCB layout, schematics, BOM) are published on Sensirion GitHub page: https://github.com/Sensirion/smartgadget-sht4x-hardware
Block Diagram
Bill of Materials
Component| Type| Qty.| Designator| Footprint| Manufacturer| Manufacturer Part
Number
---|---|---|---|---|---|---
RH&T
Sensor
| SHT40-AD1B| 1| SEN1| SHT4x-xD1| Sensirion AG| SHT40-AD1B-R2
BLE Module| BVMCN5103| 1| IC2| BVMCN5103_Sma
ll
| Braveridge| BVMCN5103-CEAA- BK
LCD driver| MC9S08LL8 CGT| 1| IC1| QFN50P700X700 X80_HS-49N| NXP – Freescale
Semiconductor| MC9S08LL8CGT
LCD
Display
| LCD| 1| LCD1| LCD_1209061_A2| AV Display| LCD_1209061_A2
Battery holder| For CR2032
batteries
| 1| BAT1| BAT-HLD-001- THM| Linx Technologies| BAT-HLD-001-THM
Switch| Switch| 1| SW1| SW_EVQQ2P02W| Panasonic
Electronic Components
| EVQ-Q2P02W
Crystal| ABS07- 32.768KHZ- T| 1| Q1| XTAL_ABS07| Abracon LLC| ABS07-32.768KHZ-
T
Capacitors| 100nF,
10V/X7R
| 9| C1, C2,
C3, C4,
C5, C6,
C7, C8, C23
| C_0402| n/a| n/a
Component| Type| Qty.| Designator| Footprint| Manufacturer| Manufacturer Part
Number
---|---|---|---|---|---|---
Capacitors| For display support, no electrical
function
| 4| C10, C11, C12, C13| C_0805| n/a| n/a
Capacitors| 22uF,
6V3/X5R
| 4| C14. C15, C16, C17| C_0603| n/a| n/a
Resistors| 10kOhm, 1%| 2| R4, R6| R_0402| n/a| n/a
PCB Layout
Version History
| Date | Revision | Changes |
|---|---|---|
| 10. May 2021 | 1 | Initial version |
Important Notices
Warning, Personal Injury
- Do not use this product as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Do not use this product for applications other than its intended and authorized use. Before installing, handling, using or servicing this product, please consult the data sheet and application notes.
- Failure to comply with these instructions could result in death or serious injury.
- If the Buyer shall purchase or use SENSIRION products for any unintended or unauthorized application, Buyer shall defend, indemnify and hold harmless SENSIRION and its officers, employees, subsidiaries, affiliates and distributors against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if SENSIRION shall be allegedly negligent with respect to the design or the manufacture of the product.
ESD Precautions
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take customary and statutory ESD precautions when handling this product. See application note “ESD, Latchup and EMC” for more information.
Warranty
SENSIRION warrants solely to the original purchaser of this product for a period of 12 months (one year) from the date of delivery that this product shall be of the quality, material and workmanship defined in SENSIRION’s published specifications of the product. Within such period, if proven to be defective, SENSIRION shall repair and/or replace this product, in SENSIRION’s discretion, free of charge to the Buyer, provided that:
- notice in writing describing the defects shall be given to SENSIRION within fourteen (14) days after their appearance;
- such defects shall be found, to SENSIRION’s reasonable satisfaction, to have arisen from SENSIRION’s faulty design, material, or workmanship;
- the defective product shall be returned to SENSIRION’s factory at the Buyer’s expense; and
- the warranty period for any repaired or replaced product shall be limited to the unexpired portion of the original period.
This warranty does not apply to any equipment which has not been installed and
used within the specifications recommended by SENSIRION for the intended and
proper use of the equipment. EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH
HEREIN, SENSIRION MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT
TO THE PRODUCT. ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY EXCLUDED AND DECLINED.
SENSIRION is only liable for defects of this product arising under the
conditions of operation provided for in the data sheet and proper use of the
goods. SENSIRION explicitly disclaims all warranties, express or implied, for
any period during which the goods are operated or stored not in accordance
with the technical specifications.
SENSIRION does not assume any liability arising out of any application or use
of any product or circuit and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. All
operating parameters, including without limitation recommended parameters,
must be validated for each customer’s applications by customer’s technical
experts. Recommended parameters can and do vary in different applications.
SENSIRION reserves the right, without further notice, (i) to change the
product specifications and/or the information in this document and (ii) to
improve reliability, functions and design of this product. Copyright © 2021,
by SENSIRION. CMOSens® is a trademark of Sensirion. All rights reserved
Headquarters and Subsidiaries
Sensirion AG Laubisruetistr. 50 CH-8712 Staefa ZH Switzerland
phone: +41 44 306 40 00 fax : +41 44 306 40 30
[email protected]
www.sensirion.com
Sensirion Taiwan Co. Ltd phone: +886 3 5506701
[email protected]
www.sensirion.com
Sensirion Inc., USA phone: +1 312 690 5858 [email protected] www.sensirion.com
Sensirion Japan Co. Ltd. phone: +81 3 3444 4940 [email protected]
www.sensirion.com/jp
Sensirion Korea Co. Ltd. phone: +82 31 337 7700~3 [email protected]
www.sensirion.com/kr
Sensirion China Co. Ltd. phone: +86 755 8252 1501 [email protected]
www.sensirion.com/cn
To find your local representative, please visit
www.sensirion.com/distributors
© Copyright Sensirion AG, Switzerland
Downloaded from Arrow.com.