PROAIM FLCM-FLN-300N Flowline 300N Stabilizing Camera Instruction Manual

June 17, 2024
PROAIM

**PROAIM FLCM-FLN-300N Flowline 300N Stabilizing Camera Instruction Manual

**

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below
What’s In The Box

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmit edh by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permit edh by the applicable copyright statutes or in writing by the Publisher.

Flowline Setup

NOTE : It is recommended to attach the minimum required weight for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.

  • Join Support Arm with Sec on on Support Jacket, by simple push-fi technique
    Join Support

  • Slightly loosen all four Adjustment Knobs provided on back of Support Jacket to adjust the height of Support Arm.

  • Wear Support Jacket and gotten the buckles provided at waist and chest. Then adjust un l you fi d it comfortable.
    Support Jacket

  • Adjust Support Arms on both sides. This will fi e tune your Jacket to a comfortable posy on and also help in she ink weight to your shoulders and hip

  • Loosen the knob on hook and a ache camera with it. Tighten the knob back to ensure slip-free connect on.
    Loosen the knob
    NOTE : Leave a gap of approximately 2cm/1” between the top of Camera Hook and Support Arm.

  • Finally, a ache one end of Safety Belt with camera and other end with Support Jacket, for more safety & protect on.
    Safety Belt

  • When folding Fly am Flowline, always make sure to put the upper part of Support Arm inside hip/waist belt and fasten buckle at the hip/waist belt. This will prevent Suspension Line from wearing.

YOUR FLYCAM FLOWLINE CAMERA SUPPORT ALL DRESSED UP AND READY TO GO!
FLOWLINE CAMERA SUPPORT
(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty : We o er one year warranty for our products from date of purchase. Within this period of me, we will repair it without charge for labor or parts. Warranty doesn’t cover transport on costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspect n and evaluate on by us.

Liability : We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

Contact Us : In case of any kind of disuse sac on, please Contact us immediately and we promise our utmost support and care un l you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PROAIM User Manuals

Related Manuals