SENSIRION SFC5xxx Mass Flow Controller Kit User Guide
- June 6, 2024
- SENSIRION
Table of Contents
SENSIRION SFC5xxx Mass Flow Controller Kit User Guide
Thank you for your interest in our mass flow controller solutions
Sensirion AG
Laubisrütistrasse 50 · 8712 Stäfa · Switzerland · phone +41 44 306 40 00 ·
info@sensirion.com
www.sensirion.com
Set-up
- Install up-to-date “SFC5xxx viewer” software and USB drivers from our website.
- Connect your mass flow controller to a source of pressurized gas (mind the arrow indicating flow direction). For your first measurement, the outlet can stay unconnected.
- Connect the DB9 cable to the mass flow controller (sold separately from evaluation kit).
- Connect the USB part of the cable to your PC.
- Choose the right plug, insert it into power adapter and connect it to 100-240 VAC.
Getting started with Sensirion SFC5xxx viewer software
- Start the SFC5xxx viewer software.
- Select the COM port the mass flow controller is connected to and click “Open”.
- Choose the calibration for the gas you have connected, right-click on it and select “Load Calibration”.
Controlling gas flow
Please find all information about our mass flow controllers, including necessary software, on our website: www.sensirion.com/sfc5500
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>