AZIJYV C3-BT Heads Up Display for Cars Instruction Manual

Instruction Manual

AZIJYV C3-BT Heads Up Display for Cars

Car Head Up Display (Navigation Version) (C3-BT)
(This product Design Patent and Display Images Copyright had been registered with customs record)
HUD short for Head Up Display,The main function is to display the car dashboard information (e.g.speed,RPM,water temperature,voltage,trip distance etc ),and keep the driver eyes always on road to avoid the dangerous of lowering down head to read the dashboard.
Kindly Attention
System selection:Please switch to GPS system when OBD mode is not available 0BD2 mode working voltage: 5V~18VDC (12vdc/200mA), when voltage is higher than 24v, please use a USB cable for GPS mode.
Product function:

1. Spare interface
2. OBD / USB cable connection
3. Optical lens
4. LCD display

Button Function

Short press:1s
Long press:2s hold and release after display appears

1. Power switch: long press to turn off,again to turn on

2. ’<’ Button(short press)
   (1)to choose the language and system
   (2)to switch the functions in the right area
   (3)menu and parameter ‘+’

3. ‘>’ Button(short press)
   (1)to select the language and system
   (2)to switch the functions in the left area
   (3)menu and parameter ‘-’

4. ‘M’ Button
   Short press:
   (1) to switch functions
   (2)to switch displays
   Long press:
   (1)to enter into settings
   (2)to save and exit after adjustment

Abbreviations:

1. Please download this software,install HUD and actuate your car,manually turn on the Bluetooth and positioned,click the icon of WiiYii,system will automatically search the Bluetooth and connect

2. If the mobile phone cannot connect to the Bluetooth device correctly, please follow the instructions below:
   HUD needs to be displayed normally. If the OBD system cannot be connected, please switch to the normal display of the GPS system.
   Whether the mobile phone Bluetooth is connected to other devices, Delete the paired Bluetooth device, and bind WYHUD

3. Turn off the Bluetooth and on again, or restart the phone (For more questions, please refer to the FAQ on the next page)

Setting Mode(Menu mode)

Press the ‘M’ to enter the setting item, >’ to select the menu, ‘M’ short press to confirm, ‘M’ long press for 2 seconds to save and exit

Language Set: CN Chinese Simplified/TW Chinese Traditional/EN English
Sound Switch: ON buzzer on/ OFF buzzer off
Overspeed warning: alarm will turn on when the vehicle speed reaches the default value of 150KM/h,setting range from 5-200km/h
Engine temperature alarm:its default value 120 degrees C,range 50-200
Engine speed alarm:its default value of 6000r/min,range 1000-8000
Voltage alarm setting:its default value of 10.5v,range 10.0-15.0v
Speed adjustment:the operation is required only there is an error(e.g. instrument display 100 Km/h HUD shows 105Km/h,use default value 107-5=102)
Speed zero:the vehicle speed does not return to 0 after the car stops (E.g. speed display 5Km/h,please adjust HUD to 6Km/h)
Voltage adjustment: Fine-tuning when voltage is wrong with instrument panel voltage (If the device shows 0.2V above the meter voltage, the device is adjusted to 98%)
Engine displacement: please adjust if there is too much deviation on the fuel consumption (E.g. make parameter value to 3.6L,if your car displacement is 3.6L)
Fuel consumption:making a fine-tuning if there is an error
(If the device shows 0.2L above the meter voltage, the device is adjusted to 98%)
Change Color 1: the speed color in the main display interface
Change Color 2:the left side functions color on the screen
Change Color 3:the right side functions color on the screen
Backlight brightness: Auto automatic light sensitive, 1 for the darkest, 8 for the brightest
Temperature unit: °C-Celsius °F-Fahrenheit
Speed unit: Km/h: km, MPH: Miles
Count mileage: total mileage synchronization
(Keep it as same as dashboard,ex:odometer shows 30010km, adjust the parameter value to 30010km)
Shutdown delay setting: 10 seconds by default, adjustment to more than 180 seconds
Shutdown voltage setting:please adjust to 13.2V or 13.6 or to COM mode if your car auto start-stop system when device can’t turn off
Factory reset: System restored to factory preset Select this operation,short Press ‘M’ to confirm
Driving test
Acceleration test: kilometers acceleration refers to the seconds 0 to 100km/h,is a test of car power
Brake test: the time and distance taken of a brake after the speed >60, is a test of brake performance
Troubleshooting settings
Scan fault code: Scanning the car for fault codes
Clear fault code:Pressing ‘M’ to clear the fault code when the car has fault code
Read the data stream: Show all the data in the car engine

Please note
It is recommended to unplug the device if your car doesn’t been used for more than one week.

OBD2 FAQ:

1.No function is displayed,no power

Check whether the OBD cable is tight connection,pull down repeatedly to confirm,please try it on another car if still not workable,analysis if it is an error from OBD diagnostic interface,if yes,please repair it and connect the device again.

2.0nly the car voltage displays and be automatic power off after 30 second

(1) This product is only available for OBDII and EOBD cars when it is in OBD2 mode (2) This product OBD2 mode does not support OBD | and JOBD (3) OBD2 is a car protocol(U.S.A Cars:2003 Other regions:2007) (4) Switch to the GPS system using the USB cable to display, within 5 seconds of power short press the >’ key to select the GPS system.

3.The vehicle speed on HUD is not as same as speedometer’s

(1) Please check that the unit is correct KM/mile MPH, (speed unit switch please refer to the settings) (2) Vertical long press the ‘M’ button into the system settings, press >’to select the speed adjustment menu,and make a fine- tuning (e.g. meter displays 100 Km/h,device shows 105Km/h,use default value 107-5=102 ).

4. There is an error on fuel consumption

(1) Checking your car displacement and make sure that the engine displacement of the device is as same as your car’s(e.g. car is 2.0L,please set parameter value to 2.0L) (2) if the displacement is the same, you can also do a fine- tuning settings(e.g. equipment fuel is higher than 0.2L,please set the parameter to 98%) Recommended: fine-tuning is optional since it is areal data from car computer

5.This device cannot auto shut down

After the car engine stops,the RPM on the machine can not be turned off,please set voltage to 13.2V or 13.6V,so that the car can be turn off after 3 minutes.

6. Automatic start-up will auto off when step the brake and same situation on Hybrid car in the traffic.

(1) Setting to COM mode(in the menu of shutdown voltage) (2) Setting shutdown delay to 300 seconds,so that it can turn off after 5 minutes (3) Please switch to the GPS system(Short press ‘>’ within 5s)

7.Wrong operation lead to crashes

(1)Are there other other OBD devices on OBD2 interface (parking sensor,TPMS, lock lift window,ELM27) (2)Had your car been modified and brushed(central navigation,electronic throttle controller,fixed speed cruise) (3)No matter engine start stop,keyless entry or remote start will cause a crash,unplug other OBD devices,and do a factory reset (see the menu settings) Please switch to GPS system(short press ”>

GPS FAQ:

1.The screen is not displayed, no power

Check the OBD cable or car charger is in tight connections,try it several times to make sure,or plug a USB cable into the cigarette lighter

2.No speed

GPS will take a short of time to search the satellites,please drive the car to the open road to get 5 and more satellites so that Gauge can be used normally

3.HUD cannot automatically power on or repeatedly extinguish during driving

Setting the shutdown voltage to 13.0V or 12.8v(in OBD mode)

4.Inaccurate clock

Enter into the settings(System time):press®’to adjust and press‘M’ to save exit

5.Speed is not correct

(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item) (2) The car factory had increased speed(5-7%)than real for drivers’ safety,satellite data is strictly follow the international standards (3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, machine display 105Km/h,default value 107-5=102

6.There is an error of travel direction

Satellite cannot recognize the driving direct without speed display,it will be normal until exceeds SKM/H

7.Speed is still on display after the car stops

Satellite drift will be caused in underground parking,tunnel,overpass or blockers,please drive your car on open road,then this situation can be solved after the satellite numbers >5

8.HUD cannot be automatically shut down after car stopped

(1) HUD can be shut down in 3 minutes(in OBD mode) (2) If not in 5 minutes,set item shutdown voltage to 13.5V or switch to GPS mode

Navigation FAQ :

1. How to install APP

Scan QR code to download this APP(see manual) Iphone: Searchkeyword ‘WiiYii’ in APP Store Android phones: Searchkeyword ‘WiiYii’ in Android Market (1) Please download this software (2) manually turn on the Bluetooth and location (3) click the icon of WiiYii,system will automatically search the Bluetooth and connect

2.Bluetooth cannot connect to Phone

(1) HUD host needs to display normally, if the OBD system cannot be connected, switch to GPS system normal display (2) Whether your phone's Bluetooth is connected to another device, delete the bluetooth device that has been paired, and then bind to WYHUD (3) Turn Bluetooth off again and then turn on your phone's Bluetooth, or restart your phone (4) Make sure that other phones turn off Bluetooth

3.APP Bluetooth connection is not successful

(1)Check the phone system version and whether it supports Bluetooth 4.0, Apple system 10S9 or above, Android 4.4 or above (2)Need mobile phone to search for WYHUD via Bluetooth,Open traffic (3)Turn on GPS navigation positioning, you can enter the navigation address after successful positioning

4.App Bluetooth connection is successful,no display of input address

Please turn on the location service,open your network,check the signal,please move to a place which has a strong signal,and enter the address again

5.HUD stuck during navigation or when you switch the display interface, speed display is normal

Turn off the power-saving mode of the phone, turn off the screen forbidden function, or click to enter the phone navigation page and stay on the phone navigation page

6.Navigate 10-20m from the indication point

Because the GPS positioning error is about 5-10 meters, it is normal for the satellite signal to be 10-20 meters when the signal is weak.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>