AZIJYV G17 Digital GPS Speedometer Instruction Manual

AZIJYV G17 Digital GPS Speedometer

Product Information

Specifications :

• Model : GPS Speedometer G17
• Working Voltage: 5V
• Display Functions:

1. Atmosphere Light
2. Driving Distance
3.  **Compass:** N(North), S(South), W(West), E(East)
4. Setting Button/Scroll Button
5. Over-speed Alarm Icon, Fatigue Driving Icon
6. Multifunctional Display Area: Number of satellites, travel angle, 100km acceleration
7. Decorative Atmosphere Light
8. Driving Time
9. Speed Display Area: MPH (miles), Km/H (kilometers)
10. Rotating Bracket
11.  **Multifunctional Display Area** : Time / Altitude

Product Usage Instructions

Display Functions Usage:

After powering on, wait for the GPS satellite icon to stop flashing before using the speedometer. The display functions include atmosphere light, driving distance, compass direction, setting button, over-speed alarm icon, fatigue driving icon, multifunctional display areas for various data, and more.

Scroll Button Functions:

The scroll button has various functions like switching display modes, adjusting settings, and entering the settings menu. Press inward or scroll left/right to navigate through different options.

Setting Mode:

To enter the settings menu, press and hold the scroll button for 2 seconds. Use the scroll button to adjust parameter values. Save and exit settings by pressing and holding the scroll button for 2 seconds.

FAQ :

• Q: What is the default over-speed alarm setting?
  • A: The default parameters for over-speed alarm settings are as follows: First Stage: 150 km/h Second Stage: 180 km/h Third Stage: 200 km/h
• Q: How can I reset the device to factory settings?
  • A: To reset to factory settings, adjust the “Factory Data Reset” parameter value to 1 and long-press the OK key to save and exit.

GPS speedometer : G17

Tips: The working voltage of this product is 5V, and it is prohibited to use a voltage higher than 5V for power supply.

After the product is powered on, the satellite icon flashes to indicate that it is in a search state. The GPS satellite icon stops flashing and displays the number of satellites before it can be used normally.

Display Functions

1. Atmosphere Light
2. Driving Distance
3. Compass: N(North) S (South) W (West) E (East) (The product can only be used normally after the satellite is found)
4. Setting Button/Scroll Button
5. Over-speed Alarm Icon Fatigue Driving Icon
6. Multifunctional Display Area: Number of satellites, travel angle, 100km acceleration
7. Decorative Atmosphere Light
8. Driving Time
9. Speed Display Area : MPH (miles) Km/H (kilometers)
10. Rotating Bracket
11. Multifunctional Display Area : Time /Altitude

Functions of the Scroll button:

1. Press inward (once): A. Switch display mode
   • B. Switch settings items in the settings menu
2. Press inward (hold for 2 seconds):
   • A. Enter the settings menu
   • B. After the parameter value is adjusted, long press to save and exit
3. Scroll left:
   • A. Switch the number of satellites, driving speed, 100 km acceleration
   • B. Adjust parameter values in settings
4. Scroll left (hold for 2 seconds): Turn off/on the buzzer
5. Scroll right : A. Function Switches: Clock/Altitude/Date
   • B. Adjust parameter values in settings

Setting mode

Press inward the scroll button and hold it for 2 seconds to enter the setting menu, and press inward the scroll button for a short time to select the setting item; After entering the settings item, scroll the button left or right to adjust the parameter values. Press inward the scroll button and hold it for 2 seconds to save and exit.

FAQ

1.  No display on the screen, no power
   • Please check whether the USB cable is damaged, or replace the USB cable for testing.
   • (Attention : It is forbidden to use a voltage higher than 5V)
2. No speed display
   • After powering on, the satellite icon flashes to indicate that it is in the state of satellite search, please pull over in an open area without turning off the car to receive the signal, and the machine can be used normally after the satellite icon stops flashing and displays the number of satellites.
3. The speed is still displayed after the car stops
4. If driving to underground parking lots, tunnels, under flyovers, or other places that make the signal unstable, the data displayed by the product may have a certain deviation, and the car can return to normal by driving to an open road.
5. The speed is not accurate
   • a. Check whether the unit is correct, Km/H or MPH (Please refer to the setting mode in the figure above for speed unit switching.)
   • b. The vehicle speed can be fine-tuned, such as the dashboard displays 100 km/H, the machine displays 105Km/H, and the parameter value can be adjusted to 102.
6. Time calibration
   • a. The default of the machine is +8:00 Beijing time.
   • b. If you need to adjust the time to other time zones, please enter item 8 of the setting menu, dial left or right to adjust, and the adjustment range is 30 minutes/time (for example: a certain area is 1 hour faster than Beijing time, dial left the wave button twice.)
   • Note: The satellite icon flashes to indicate that the satellite has not been received, the time is displayed as the time zone, please adjust to the time zone of your country (e.g. South Korea +9:00). After the satellite icon stops flashing, the time calibration can be displayed directly.
7. The driving direction is displayed incorrectly When there is no speed, the satellite cannot identify the direction of the vehicle, and the normal display can only be displayed after the driving speed exceeds 5Km/h.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>