AZIJYV H2 Digital Speedometer GPS HUD User Manual

AZIJYV H2 Digital Speedometer GPS HUD

Specifications

• Model : H2
• Power Interface : MINI USB 5V
• Display : Head-up Display
• Functions: Atmosphere Light, Vehicle Speed Display, Compass Display

Product Usage Instructions

Appearance

Description of Each Component:

1. [Up] Key: Scroll up
2. [Middle] Key: Press vertically inward
3. [Down] Key: Scroll down
4. Photosensitive element: Automatically adjust the display brightness
5. MINI USB power interface: 5V

Function Description

1. Atmosphere Light: Rotates when searching for satellite signal
2. Vehicle Speed Display Area
3. Compass Display Area: Shows current direction of travel (E, ES, S, SW, W, WN, N, NE)
4. Speed Unit: KM/H (kilometres), MPH (miles)

First Use :

1. Insert the MINI end of the power cord into the HUD monitor and the other end into the car USB interface.
2. After powering on, wait for 1 minute for signal stabilization. The display will show vehicle speed and direction of travel.
3. Short press the middle button to switch between different display modes.

Setting Mode

In a normal working state, press and hold the Middle button for 3 seconds to enter the setting interface. Scroll up and down keys to select settings, and press [Middle] key to confirm. Settings include Speed unit switching, Overspeed alarm, Display brightness adjustment, and Vehicle speed calibration.

Restore Factory Setting

1. While holding down the Middle key, plug in the USB cable.
2. UD displays 0 to indicate factory reset completion.

FAQ

• Q: How do I change the speed unit from KM/H to MPH?
• A: In the setting mode, select the Speed unit switching option and toggle between KM/H and MPH using the [Middle] key.
• Q : What should I do if the displayed vehicle speed does not match my car’s instrument cluster?
• A: Adjust the Vehicle speed coefficient in the settings for calibration to match the displayed speed with your car’s instrument cluster.

Before using this product, please read the manual carefully to fully understand and utilize all the functions of the product. In order to ensure your driving pleasure and safety while experiencing speed.

Appearance

Description of Each Component：

1. [Up] Key: Scroll up
2. [Middle] Key: Press vertically inward
3. [Down] Key: Scroll down
4. Photosensitive element: Automatically adjust the display brightness when the external brightness changed
5. MINI USB power interface: 5V

Function Description

1. Atmosphere Light: Rotating to display when searching for satellite signal
2. Vehicle Speed Display Area
3. Compass Display Area: Display the current direction of travel.
   • E (East), ES (Southeast)
   • S (South), SW (Southwest)
   • W (West), WN (Northwest)
   • N (North), NE (Northeast)
4. Speed Unit: KM/H- kilometres, MPH- miles

First Use

Insert the MINI end of the power cord into the

Light+Speed+Compass

Speed+Compass

Speed

Setting Mode

In the normal working state of HUD, press and

hold the 【 Middle 】 button for 3 seconds to enter the HUD setting interface. You can enter into the desired setting by scrolling the up and down key, and pressing the [middle] key to enter into the setting. After the setting is completed, press the [Middle] button to confirm, and the machine will automatically return to a normal working state in about 5 seconds.

1. Setting: Speed unit switching (KM/H-MPH)
2. Setting: Overspeed alarm (default value: 120KM/H)
3. Setting: Display the brightness of HUD (default value: 0, automatic)The higher the value, the higher the brightness
4. Setting: Vehicle speed coefficient (default value: 100)

If the vehicle speed displayed on the HUD does not match the instrument cluster, this percentage parameter can be adjusted for calibration.

Restore Factory Setting

• Step 1 : While holding down the 【 Middle 】 key, plug in the USB cable.
• Step 2 : HUD displays “0” in the middle to release, and the factory setting is complete

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>