KRIB BLING XQB201B-GOLD9 Full Automatic Washing Machine Instruction Manual
- May 15, 2024
- KRIB BLING
Table of Contents
KRIB BLING XQB201B-GOLD9 Full Automatic Washing Machine
Specifications:
- Model: XQB201B-GOLD9 / XQB201B-GREY9
- Type: Automatic Washing Machine
- Class: Class I Appliance
Product Information
The automatic washing machine model XQB201B is designed for efficient and convenient laundry cleaning. It comes with pre-wash, wash, spin, and post-wash functions to cater to different laundry needs. The machine is equipped with safety features and error detection capabilities to ensure smooth operation.
Usage Instructions
Install Guide:
Follow the provided parts and BOM notice for installation. Make further
adjustments as necessary to ensure proper setup.
Usage Guide:
- Pre-wash: Prepare your laundry items before loading them into the machine.
- Programming and Features: Set the desired wash program and explore the various features available on the machine.
- Wash and Spin: Start the washing cycle, allowing the machine to clean and spin the clothes accordingly.
- Post-wash: Once the cycle is complete, remove the laundry from the machine for drying or further processing.
FAQ:
-
Q: What should I do if the machine displays an error?
A: If you encounter an error, refer to the digital display information provided in the manual to identify the issue. Follow the recommended steps to address the specific error, such as checking water pressure, drainage, or repositioning clothes in the tub. -
Q: How can I address water leakage or sensor faults?
A: For water leakage or sensor faults, unplug the machine, wait for 10 seconds, and then replug it. Adjust the water level setting to normal and restart the machine to see if the issue persists.
For customer service inquiries please email our support team: at contact @krib-bling.com
safety instructions
This product belongs to a class I appliance, please pay attention to electricity safety when using it!
SAFETY REQUIREMENTS
Ensure that servicing is done by factory-authorized service personnel, to minimize product damage or safety issues.
GROUNDING INSTRUCTIONS
- This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
- This appliance has a cord that has a grounding wire with a 3 -prong plug. The power cord must be plugged into an outlet that is properly grounded.
- If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.
TROUBLESHOOTING
Parts and Bom
Read Before Use
Symbol Notice
Accessory
Notice
Post-wash
- Each month please clean the Impeller filter to ensure the best performance.
- During clean-up, please unplug the power plug from the socket
Filter cleaning
- Must use a filter when washing
- Please clean up the filter timely
- Take off the filter See the pic.
- Clean the filter
- Hold on the handle of the filter and press on the bottom to put it in.
- Turn off the tap when finish washing
- please don’t store water in the machine, once finish washing please drain up water directly
- .Must unplug first then do maintenance
- Hang the power cord and drain pipe on the hook
- Wipe the wet surface and inner case by a soft and clean cloth, open the top cover for some time (about 1 hour) then close it.
Wash and Spin Usage guide
How to use laundry detergent
- Once the water has reached the water level, put the right amount of detergent into the container; slowly pour the powder into the tub. Allow at least 30 seconds to ensure an even dissolution or use the soak function for best results.
- Put in washings and select a suitable water level.
- Clothes with color or patterns are easy to rub off, please read the label before you wash your clothes. Please ensure that you wash whites, with whites only and colors with other colors. Do not mix (if you don’t want your whites to no longer be whites! However if you do we suggest you use red for a nice light pink.).
Use laundry detergent in moderation
- We recommend that you do not use a high-foaming detergent, as it will no doubt make a mess and in extremely high dosages may even enter the control panel and destroy the appliance.
Laundry detergent dosage should refer to the detergent instructions.
How to use bleach
- Once the water has reached the water level, put the right amount of washing bleach into the container; slowly pour the powder into the tub.
- Clothes with color or patterns are easy to rub off, it should be avoided also to use bleach. Please ensure you wash whites, with whites only and colors with other colors. Do not mix (if you don’t want your whites to no longer be whites.
- However if you do we suggest you use red for a nice light pink).
- Bleach should not have direct contact with the washing. Use of bleach method and usage according to bleach instructions.
- Powder-type bleach should be melted before use. Please note that it is not advisable to use bleach in washing clothes due to potential skin irritations etc.
Please note:
- There is a period to start spin dry even if there is no water in the tub.
- Clothing with colors may easily rub off and must be washed separately from other clothes.
- If the water is below the minimum water level the impeller will not turn.
Notice Read Before Use
Installation
Please install and adjust the washing machine according to the requirements of the specifications, this is very important for your safety and correctly use the washing machine.
Install the rat guard
Adjust the Installation position
Please leave, more than 20 mm between the washing machine and the wall,
maximum slope Angle is 2 ° on the bearing surface. Ground tilt or uneven may
cause the washing machine to run unstable or stop in midway, please use the
following method to adjust:
Determine horizontal
- Use a bubble-level tool or a free bubble-level mobile phone app to confirm Whether the washing machine is horizontal. If you do not have access to either place
Adjust the adjustable nut
- Lift up the machine’s adjustable side, loosen the adjustable nut, rotate it, and make the machine horizontal.
- After stable adjustment, tighten the adjustable nut.
Before installation, remove the bottom foam and plastic stent. 
Programming and features
- The washing capacity means the maximum weight of washing or spinning for a wash.
- The thickness of the fabric, size or kinds, will affect the actual washing capacity.
- Do not select high water level when fabric weight is below 1.0kg
- Please select the high water level when you believe it is suitable. It will not clean clothes better if you use a high water level for a small amount of clothes so please try and save water.
The reference weight of washing
Pre-wash
Please pay attention to the following matters before washing
Preparation before washing
- Connect the water pipe well, and turn on the tap.
- Plug into the socket
- Put down the drain pipe
- a. Ensure no items in the clothes pocket (such as screws, coins, etc.)
- b. Turn clothes over to wash, so that the chips or lines do not adhere to the surface of clothes during washing.
- c. When do fine cleanings, like Women’s underwear, thin nylon and polyester materials, please put it into a washing bag.
- d. Tight loose belt in clothing and pull on the zipper.
- e. To get rid of the mud and sand on clothing before washing.
- f. clothes that are easy to float on, please put it in the bottom, in addition, when floating, please stop and press it into the washing liquid.
- g. Please separate thick clothes and thin clothes in washing.
- h. Inappropriate to wash down jackets and not bibulous clothing, if needed, please select the low water level and do single washing.
- e. It is forbidden to wash fur blankets and electric blankets.
Spin drying can lead to shrinkage and deformation of the wool fabric.
- Please don’t us the spin function on wool.
- It is forbidden to spin dry down jackets and other lightweight but bulky clothing to avoid danger. Please check the washing label of your clothes item before you wash.
Notice
It is forbidden to wash fur blankets and electric blankets.
How to change the drain pipe direction
How to use drain pipe
- The height of the drain pipe should be less than 10 cm, or it may cause: the drain to not be fluent, longer drain, and stop working midway.
- Don’t trample or pressure pipes.
- You can cut the drain pipe from the middle part if the pipe is too long and bevel cut the front side of the pipe can help drain fluently.
- If you need to lengthen the pipe, please purchase another pipe( which length does not exceed 1.5m) and seal on the connected part Of two pipes.
- when pipe is too long please cut it from A or B
Further adjustments
Connect water pipe to the washing machine
- Don’t remove the sealing ring, and please check whether the sealing ring is Off or damaged before every use.
- Input pipes connect to the valve
- Tighten the pipe nut and shake it to check whether it is suitable
Connect pipe connector and water pipe The default standard connector of our product is a conventional faucet in the United States; if it cannot be used, please purchase suitable accessories to complete the assembly of the product.
Check the connection between the water pipe and tap
- Pull the water pipe slightly to check whether it is tight.
- Turn on the tap to check whether it is leaking.
- Don’t bend the water pipe
- Please check the connection between the water pipe and tap, to see whether the installation is tight or not before use.
Dismantle the water pipe
- turn off the tap
- Press on the lock lever and slider then pull down the pipe.
Tips : if use the machine more than once a week, it is better to keep the pipe connector on
Check the tap
Documents / Resources
| KRIB
BLING XQB201B-GOLD9 Full Automatic Washing
Machine
[pdf] Instruction Manual
XQB201B-GOLD9 Full Automatic Washing Machine, XQB201B-GOLD9, Full Automatic
Washing Machine, Automatic Washing Machine, Washing Machine
---|---