DORMAN 926-264 Latch Reinforcement Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
926-264 Latch Reinforcement
Instruction Manual
REMOVAL/INSTALLATION INSTRUCTIONS:
926-264 DOOR LATCH REINFORCEMENT KIT
BEFORE YOU BEGIN:
- Always wear proper safety equipment when performing repairs.
- Ensure this part fits your exact vehicle year, make, model and configuration. You can verify at your point of purchase using the part number on the box.
- Reference the appropriate service manual for your vehicle. If you do not have a service manual, and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.
Instructions
STEP 1: Remove top door latch mounting screw only. STEP 2: Attach
reinforcement plate by top mounting hole only, using one provided new screw to
prevent the door latch from falling down in the door. Do not tighten down
screw at this time.
STEP 3: Remove two original bottom latch screws and swing plate in
position, aligning bottom mounting screw holes. STEP 4: Install and
tighten provided new bottom mounting screws and tighten top screw.
STEP 5 : After tightening down all mounting screws, open and close door to ensure proper latch operation.
STEP 6 (Optional): After reinforcement plate is tightened and proper operation is verified, drill holes for auxiliary rivets. Use drill bit matching diameter of locating holes and drill holes through door shell.
Still need help?
Please call our Technical Support team for assistance
from our team of certified automotive experts.
1-866-933-2911
Disclaimer: Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc.
Corporate Office and Customer Service:
1-800-523-2492
Tech Line: 1-866-933-2911
©2022 No reproduction in whole or in part
without prior written approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>