DORMAN H621309 Front Driver Side Brake Hydraulic Hose Installation Guide
- June 1, 2024
- DORMAN
Table of Contents
DORMAN H621309 Front Driver Side Brake Hydraulic Hose Installation Guide
BRAKE HOSE INSTALLATION INSTRUCTIONS
NOTE: READ INSTRUCTIONS THO
ROUGHLY BEFORE INSTALLATION WORK BEGINS
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
A steel brake line may be permanently attached to the brake hose on some vehicles (figure 1). This replacement hose is designed without the permanent steel line. You must obtain the correct length of steel brake line and make the appropriate bends (figure 2).
- If the steel brake line being used is already equipped with flared fittings, the fitting provided with this hose can be discarded (figure 3).
- If fabricating the steel line with bulk tubing and a double flare tool, the fitting for the end that will connect to the hose is included with the hose (figure 3).
- The end of the hard line attaching to the vehicle’s system must match the style already on the vehicle (inverted double flare or ISO flare).
This procedure should be performed by an experienced technician.
Figure 1: Original brake line on vehicle permanently attached
Figure 2: Replacement brake line must be bent to conform to original
(must use line bending tool)
Figure 3: Fitting not needed if replacement line already has fittings
Disclaimer
Even though every attempt to ensure this information is complete and accurate,
it is impossible to account for all possible circumstances or situations.
Please consult with a qualified auto technician before attempting to perform
any work you are not qualified to do. Automobiles can be hazardous to work on;
be sure to take all necessary safety precautions. Failure to do so may result
in property damage or personal injury. Certain motor vehicle standards and
performance requirements may apply to your motor vehicle (such as Federal
Motor Vehicle Safety Standards by the National Highway Traffic Safety
Administration). Be sure that your work is performed in accordance with such
standards and that you do not disable any motor vehicle safety feature.
9901003
Documents / Resources
|
DORMAN H621309 Front Driver Side Brake Hydraulic
Hose
[pdf] Installation Guide
H621309 Front Driver Side Brake Hydraulic Hose, H621309, Front Driver Side
Brake Hydraulic Hose, Side Brake Hydraulic Hose, Hydraulic Hose, Hose
---|---