BEST FITNESS EQUIPMENT BFWT5 Storage Racks Owner’s Manual

BFWT5
OWner’s Manual
V. BFWT5-20221017

Warning, Safety, & Maintenance

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT.
TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:
Inspect equipment before each workout. Check that all nuts, bolts, screws and pop pins are in place and fully tightened. Also, before use, check cables for sign of wear. Replace all worn parts immediately. Never use machine if any parts are damaged or missing.
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.
Keep clear of the cables and all moving parts when machine is in use.
Always make sure all Snap Links are closed when doing cable/pulley/strap exercises.
Exercise with care. Perform your exercises at a smooth moderate pace; never perform jerky or uncoordinated movements that may cause injury.
It is recommended that you workout with a training partner.
Do not allow children or minors to play on or around this equipment.
If unsure of proper use of equipment, call your local Best Fitness distributor or the Best Fitness customer service center at 1-800-556-3113.
WARNING: Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction.
DO NOT REMOVE WARNING LABELS FROM MANUAL OR MACHINE

Important Safety Instructions

Before beginning any fitness program, you should obtain a complete physical examination from your physician.

When using exercise equipment, you should always take basic precautions, including the following:

• Read all instruction befor using the BFWT5. These instructions are writeen to ensure you safety and to the protect the unit.
• Do not remove any safety labels from the machine.
• Do not allow children on or near the equipment.
• Ust the equipment only for its intended purpose as described in this guide. Do not use accessory attachments that are not recommended by the manufacturer. Such attachments might cause injuries.
• Wear proper exercise clothing and shoes for you workout, no loose clothing.
• Keep hands, limbs, loose clothing, and long hair well out fo the way of all moving parts.
• Use care when getting on or off the unit.
• Do not overexert yourself to work to exhaustion.
• If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician
• Never operate the unit when it has been dropped or damaged. Return the equipment to a service center for examination and repair.
• Never drop or insert objects into any opening in the equipment.
• Always check the unit before each use. Make sure that all fasteners are secure and in good working condition.
• Do not use the equipment outdoors or near water

Personal Safety During Assembly

• Before beginning assembly, please take the time to read the instructions thoroughly.
• Read each step in the assembly instructions and follow the steps in sequence. Do no skip ahead. If you skip ahead, you may learn later that you have to disassemble components and that you may have damaged the equipment.
• Assemble and operate the BFWT5 on a solid, level surface. Locate the unit a few feet from the walls or furniture to provide easy access.

The BFWT5 is designed for your enjoyment. By following these precautions and using common sense, you will have many safe and pleasurable hours of healthful exercise with your Best Fitness BFWT5 Weight Tree.
After assembly, you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call the dealer from whom you purchased the machine or call 1-800-556-3113 for the dealer nearest you.
Obtaining Service
Please use this Owner’s Manual to make sure that all parts have been included in your shipment. When ordering parts, you must use the part number and description from this Owner’s Manual. Use only Best Fitness replacement parts when servicing this machine. Failure to do so will void your warranty and could result in personal injury.
For information about product operation or service, go to www.bestfitness.com or contact an authorized Best Fitness dealer or a Best Fitness factory-au- thorized service company or contact Best Fitness customer service at one of the following:

Or write to: Best Fitness
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future reference. If you need to order replacement parts please be prepared to provide the following information when contacting us so that we can assist you better.

1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Descriptio

preparation

Thank you for purchasing the BFWT5. This machine is part of the Best Fitness line of quality strength training machines, which lets you target specific muscle groups to achieve better muscle tone and overall body conditioning. To maximize your use of the equipment please study this Owner’s Manual thoroughly.

Required Tools
The basic tools that you must obtain before assembling the BFWT5 include but are not limited to:

• Metric Allen Key Set
• Standard Allen Key Set
• Standard Wrench Set
• Metric Wrench Set
• Adjustable Wrench
• Screwdriver (standard and/or phillips)

Installation Requirements
Follow these installation requirements when assembling the BFWT5:
Set up the BFWT5 on a solid, flat surface. A smooth, flat surface under the machine helps keep it level. A level machine has fewer malfunctions.
Provide ample space around the machine. Open space around the machine allows for easier access.
Insert all bolts in the same direction. For aesthetic purposes, insert all bolts in the same direction unless specified (in text or illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.
Fill out and mail the warranty card.
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the BFWT5 using the illustrations only, important safety notes and other tips are included in the text.
Some pieces may have extra holes that you will not use.
Use only those holes indicated in the instructions and illustrations.
NOTE: With so many assembled parts, proper alignment and adjustment is critical. While tightening the nuts and bolts, be sure to leave room for adjustments.
NOTE: The bottles that are marked “Poison” is your touch up paint. Keep away from children.
CAUTION: Obtain assistance! If you feel like you can’t assemble the BFWT5 by yourself then do not attempt to do so as this could result in injury. Review the installation requirements before proceeding with the following steps. Your S/N# can be found here

Best Fitness continually seeks ways to improve the performance, specifications and product manuals in order to ensure that only superior products are released from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in this document are not intended to cover all details or variations possible with Best Fitness equipment, or to cover every contingency that may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither the publisher nor the author can accept responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations arise that are not covered by this manual, the matter should be directed to your local Best Fitness representative, or the Service Department at Body-Solid Inc. in Forest Park, Illinois.
Any Questions?
Call 800-556-3113

BFWT5 – PART List

Hardware Illustration

|
Part #2| HEX HEAD BOLT M10X20mm| QTY. 6
|
Part #3| WASHER M10| QTY. 14
|
Part #4| NYLON LOCK NUT M10| QTY. 4
|

STEP 1 Be careful to assemble all components in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of STEP 1B. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
1A. Attach two Uprights (B) to two Base Frames (A) using:
4 – (#2) M10X20mm Hex Head Bolt
4 – (#4) M10 Washer
1B. Attach two Uprights (B) to Top Frame (C) using:
4 – (#1) M10X95mm Hex Head Bolt
8 – (#3) M10 Washer
4 – (#4) M10 Nylon Lock Nut STEP 2
Be careful to assemble all components in the sequence they are presented.
NOTE:
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of STEP 2A. Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to fully go on.
2A. Attach two Weight Horns (D) to two Uprights (B) using:
2 – (#2) M10X20mm Hex Head Bolt
2 – (#3) M10 Washer
2B. Insert four Rectangular End Caps (#6) into Base Frame (A).
2C. Insert three Round End Caps (#5) into Weight horns (D) and Top Frame (C)

Exploded View Diagram

NOTE

BFWT5
PLEASE WRITE YOUR SERIAL NUMBER IN THE BOXES BELOW
S/N # 017573-

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>